IEC 62368-1
| CAT. NO. | DESCRIPTION | CLAUSE/FIG. |
|---|---|---|
| T6-01 | VARIABLE RATIO TRANSFORMER (270 V, 30 A) | 7 |
| T6-04 | 3-PHASE STABILIZED AC POWER SUPPLY UNIT 3 x 0-450V, 40A | |
| T5-17 | PUSH-PULL DYNAMOMETER 20N | 8.13 |
| T5-18 | PUSH-PULL DYNAMOMETER 50N | 8.14 |
| SP45 | HEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 44 L | 8.18 |
| T5-75 | JOINTED TEST FINGER (IEC 61032, F. 2, TEST PROBE B) | 9.1.1.2 |
| T5-77 | SMALL TEST FINGER – TEST PROBE 18 | 9 |
| T5-116 | SMALL TEST FINGER – test probe 19 | 9 |
| T5-47 | TEST PIN DIA.3-DIA.4, l=15 (IEC 61032, F. 9, TEST PROBE 13) | 9 |
| T5-48 | TEST PIN DIA. 4 x 100 mm | 9.1.3 |
| T5-51 | RIGID STEEL WIRE DIA. 1 WITH HANDLE & STOP SPHERE (IEC 61032 – Test probe D) | 9.1.4 |
| T5-41 | RIGID TEST FINGER (IEC 61032, F. 7, TEST PROBE 11) | 9.1.7 |
| T5-56 | TEST HOOK (IEC 60065, Figure 4) | 9.1.7 |
| T3-05 | SURGE TEST APPARATUS | 10.1: Fig. 5a |
| T4-22 | POWER SUPPLY 12 kV DC, 2 mA | 10.1 |
| 2094MI | MULTITESTER | 10.3 |
| T4-50 | ELECTRODE ARRANGEMENT 65 | Fig. 6 |
| T5-63 | TEST SPHERE 0,5 kg (IEC 60950-1) | 12.1.3 |
| T2-63 | TUMBLING BARREL h=500 mm (IEC60068-2-32) | 12.3 |
| 12.2, 12.4, 12.6.1, 16.5, 19.2, 19.3, 19.6 | ||
| T5-80 | TEST PLUG FOR ANTENNA COAXIAL SOCKETS | 12.5, Fig. 8 |
| T4-41 | TRACKING TEST APPARATUS 600V | 13.4 |
| SP1200CK | TEMPERATURE CHAMBER 1200 l , 0°C to 300 °C | 13.6 |
| KK265 | CLIMATIC CHAMBER 252 L, 5°C to + 95 °C, RH 15 to 95 % | 14.1 |
| T6-50 | RESISTANCE BATTERY 15 kW | 14.6 |
| T6-60 | AIR CORE INDUCTOR 100 mH, 25 A | 14.6 |
| T3-01 | EARTH BOND RESISTANCE TESTER 12 (6) V a.c., I max. 33A | 15.2 |
| T2-58 | TORSION APPARATUS 0.5 Nm (IEC 60335-1, 60950-1) | 15.4 |
| T3-20 | APPARATUS FOR FLEXING TEST (IEC 60884-1, BS 1343-1) | 16 |
| T3-13 | CABLE FLEXING APPARATUS | 16 |
| T2-74 | CORD ANCHORAGE TORQUE DEVICE | 16.5 |
| T5-64 | TEST SPHERE DIA. 40 (IEC 60950-1, 60065) | 18 |
| T2-70 | INCLINED PLANE 1000 x 1000 mm | 19.1 |
| T1-14 | FUME CUPBOARD 0,5 m3 | 20 annex G |
| T3-53 | TIMER WITH THERMOMETER | 20 annex G |
| T4-31 | NEEDLE FLAME BURNER DIA. 0.5 mm (IEC 60695-11-5) | 20 annex G |
| T4-36 | MECHANISMUS FOR BURNING TESTS (VERT. AND HORIZ.) | 20 annex G |
| T1-26 | TUBE FOR SPRAY APPARATUS, R 200, ?60, ?90° | A10.2.1 |
| T1-27 | TUBE FOR SPRAY APPARATUS, R 400, ?60, ?90° | A10.2.1 |
| T1-28 | TUBE FOR SPRAY APPARATUS R 600 ?60,?90° | A10.2.1 |
| T1-29 | TUBE FOR SPRAY APPARATUS, R 800, ?60, ?90° | A10.2.1 |
| T1-30 | TUBE FOR SPRAY APPARATUS, R 1000, ?60, ?90° | A10.2.1 |
| T1-32 | MOTOR DRIVE FOR SPRAY APPARATUS | A10.2.1 |
| T1-35 | TELESCOPE SUPPORT 270×180 | A10.2.1 |
| IP Equipment – Water tests | IEC 60529 | |
| CHAMBERS – 2.9.2, 2.10.8.2, 2.10.9, 4.2.7, 4.5.5, 4.6.5, 4.7.3, | ||
| T5-59 | TEST PROBE DIA. 12 (IEC 60950, Fig. 2C) | 2.1.1.1 |
| T5-130 | ELECTRICAL INDICATOR | 2.1.1.1 |
| T6-17 | OFF SWITCHING COUNTER WITH TIMER | 2.8.7 |
| T3-61 | IMPULSE GENERATOR 1,2/50 µs, 12 kV | Ann. N, 2.10.3.9, 6.2 G.5, Q, R |
| T3-62 | IMPULSE GENERATOR 10/700 ?s, 6 kV (IEC 60950, 61180-1, 61180-2) | Ann. N, G.5 2.10.3.9 |
| T4-57 | MANDREL TEST APPARATUS (IEC 60950-1, Annex AA) | 2.10.5.8 |
| T4-20 | ABRASION APPARATUS | 2.10.8.4 |
| T2-20 | APPARATUS FOR TESTING CORD RETENTION (IEC 60884-1, Fig. 20) | 3.2.6 |
| T4-03 | BALL PRESSURE TEST APPARATUS | 4.5.5 |
| T3-53A | THERMOCOUPLE WITH THE COPPER BLOCK Dia. 4 mm (IEC 60695-11-5, 60335-1, 60959-1) | 4.6, 4.7, Ann A |
| T3-54A | FLAME HEIGHT GAUGE (IEC 60695-11-5, 60335-1, 60959-1) | 4.6, 4.7, Ann A |
| T4-08 | GLOW WIRE TEST APPARATUS | 4.7.3 |
| T4-53 | TEST FIXTURE FOR HOT WIRE COIL IGNITABILITY TEST (IEC 60695-2-20, Fig. 3, IEC 60950-1) | 4.7 |
| T4-70 | WING TOP BURNER (ISO 9772) | Ann. P |
| T4-70A | WING TOP FOR T4-70 (ISO 9772) – spare part | Ann. P |
| T4-71 | SUPPORT GAUZE HOLDER (ISO 9772) | Ann. P |
| T4-72 | BURNER WITH VENTURI MIXER FOR BURNING CABLES 500 mm (IEC 60331-11) | Ann. P |
Tržaška 2, SI-1000 Ljubljana, Slovenia / Europe
2026 © TESTING d.o.o.
Webdesign:
