IEC TEST EQUIPMENT Testing Europe

Home | About us | Products | Links | Contact us | Support |   Testing China

IEC standards:
IEC 60065/2001 7TH EDITION
IEC 60238 (2004)
IEC 60335-1/2004
IEC 60400, ED 6.1 (2002)
IEC 60529
IEC 60598-1/2003
IEC 60669-1:1998
IEC 60884-1/2002
IEC 60950-1/2005
IEC 61058-1(2001)
 

GAUGES AND TEST PROBES

T5-XX

t5_xx.jpg

COMPLIANCE

Gauges and test probes are constructed and manufactured in compliance with different IEC, EN, and other standards (IEC 60529, 61032, 60061-3, 60320-1, 60884-1, 60400, VDE 0620-1, BS 1363-1, ).

INTRODUCTION

T5‑XX GAUGES AND OTHER TOOLS is a group of our products that is not easy to define due to its extensiveness. It includes different items (gauges, mandrels, probes, fingers, pins, spheres, tools, devices and accessories) that are intended for determining dimensional compliance of tested samples, electrical and/or thermal and/or mechanical loading and burdening, accessibility of live parts, gauges for testing contact making, “go” and “not go” gauges, gauges for testing protection against accidental contact, gauges for testing contact making, alignment gauges, contact and no contact gauges, gauges for max. and min. withdrawal force checking, gauges for breaking capacity tests, gauges for normal operation tests, gauges for temperature rise measurements, gauges for pulling test, test caps, gauges for insulation resistance testing, different kinds of loading weights, test caps for torque tests, test sockets or plugs, mandrels for bending tests, test knifes, dummy fuse links, minimum and maximum gauges…

t5_41.jpg

Typical products that are tested with these items are: lampholders, appliance inlets, connectors, finished lamps, fuses, plugs, sockets, home appliances, electric tools…

t5_51_52.jpg

They are usually made of special gauge steel DIN 17006 - 90MnCrV8; AISI O2, W. Nr. 1.2842 if not otherwise requested by standard. This is high quality, high strength steel, with long term dimensional stability, resistance to cracking, high machinability, and great resistance to wear and can be hardened up to 65 HRC. This high-chromium steel, is similar to stainless steel in its resistance to corrosion. They must, however, be cleaned/oiled after use, stored in a dry environment and be protected from corrosion. Insulated parts are made of white or black plastic material, Teflon, Delrin or some other material that conforms to standard’s requests.

t5_72_73a.jpg

All items are packed in wooden boxes with Plexiglas cover and with inscription plate that indicates conformity with standard. Wooden box is wrapped in stretch foil and silica gel is added inside to avoid contact with humidity during transport. Each gauge is delivered with verification certificate and warranty and is marked with catalogue no. and serial no. to enable identification.

t5_76.jpg

Other probes and gauges for different plugs, sockets, appliance couplers, lampholders, bulbs, fuses, dummy fuse links, and also loads for them, are also available on special request even if they are not quoted in price list.

t5_75.jpg

We also recommend purchase of T5-00 GAUGE MAINTENANCE KIT, which includes: Cleansing oil, Lubrication oil, clothes for cleaning and lubrication and cotton gloves for gauge handling all together packed in wooden box.

t5_00.jpg

OTHER CONDITIONS

Warranty: 2 years

Support by E-mail: support@testing.si

On line Skype VIDEO Support: Testing_support, matejsimonic

 

 

We will be glad to help you solve your problems and to hear any feedback from you.

GAUGES AND TEST PROBES (PDF, 209 KB)
 
Dust Chambers
Flammability Testing
IP Equipment - Water Tests
IP Probes, Fingers And Pins
Plug & Socket Testing
Gauges For Appliance Couplers
Other Mechanical Testing
Normal Operation And Breaking Capacity
Heating Chambers - Ovens
Climatic Chambers - Humidity
Calibration Baths - Temperature
Distillers
   

Copyright TESTING d.o.o.