IEC TEST EQUIPMENT Testing Europe

Home | About us | Products | Links | Contact us | Support |   Testing China

IEC standards:
IEC 60065/2001 7TH EDITION
IEC 60238 (2004)
IEC 60335-1/2004
IEC 60400, ED 6.1 (2002)
IEC 60529
IEC 60598-1/2003
IEC 60669-1:1998
IEC 60884-1/2002
IEC 60950-1/2005
IEC 61058-1(2001)
 

BALL PRESSURE TEST APPARATUS

T4-03

t4_03a.jpg

COMPLIANCE

T4‑03 BALL PRESSURE TEST APPARATUS is designed and manufactured in compliance with IEC 60695-10-2, 60335-1, 60950-1, 60884-1, 60320-1, 60598-1, 61010, 61032, 60439-5, IEC 60601-1, BS 1363-1, IRAM 2073, 4220-1 NM, BIS, UL 2601-1, CSA 60745, VDE, BSI, DIN, EN.

http://domino.iec.ch/webstore/webstore.nsf/Standards/IEC%2060695-10-2?openDocument

DESCRIPTION

T4-03 BALL PRESSURE TEST APPARATUS is intended for testing parts of non-metallic materials for resistance to heat. It is applicable to electrotechnical equipment, its subassemblies and components, and to solid electrical insulating materials except ceramics. It is 5 mm hardened steel ball with weights that exert a force of 20 N on the surface of tested sample. A suitable support for tested sample is also enclosed. The test sample shall be positioned on the support, heated up in an oven and than loaded with ball pressure test apparatus. After required period, the sample is taken out of chamber, immersed in cold water and then indentation is measured. In some cases this test is long, or multiple samples shall be checked, therefore in such cases it is practical to test multiple samples at the same time – so more than one apparatus might be needed for parallel testing.

FEATURES

· Anodised aluminium support for better heat conductivity

· Ball part is made of special gauge steel

· Horizontal rod made of stainless steel

Ball part is engraved with catalogue number and serial number, to enable its traceability and certification

DESIGN

BALL PRESSURE TEST APPARATUS made of different materials: the ball part is made of special gauge steel DIN 17006 - 90MnCrV8; AISI O2, W. Nr. 1.2842, This is high quality, high strength steel, with long term dimensional stability, resistance to cracking, high machinability, and great resistance to wear and can be hardened up to 65 HRC. Horizontal rod is made of stainless steel, weights are made of brass and are nickel plated, the support is made of anodized aluminium. T4-03 is packed in wooden box with transparent cover (Plexiglas) and with inscription plate that indicate conformity with standard. It is intended for use in chamber so all materials are so selected that they can continuously withstand high temperatures.

t4_03.jpg

TECHNICAL SPECIFICATION

diameter: 5 mm

Material hardened steel

Force exerted on the ball 20 N ± 0.2 N

Box is made of lacquered plywood: WxDxH: 320 x 180 x 90 mm

CALIBRATION CERTIFICATES

Certificate for ball dimensions and the force exerted on the test sample are available on request, but are not included in the price.

OTHER CONDITIONS

Warranty: 2 years

Support by E-mail: support@testing.si

On line Skype VIDEO Support: Testing_support, matejsimonic

We will be glad to help you and to hear any feedback from you.

The equipment described here is subject to redesign without notice. The change will not impair the function of apparatus its characteristics or the price.

BALL PRESSURE TEST APPARATUS (PDF, 131 KB)
 
Dust Chambers
Flammability Testing
IP Equipment - Water Tests
IP Probes, Fingers And Pins
Plug & Socket Testing
Gauges For Appliance Couplers
Other Mechanical Testing
Normal Operation And Breaking Capacity
Heating Chambers - Ovens
Climatic Chambers - Humidity
Calibration Baths - Temperature
Distillers
   

Copyright TESTING d.o.o.