All Products

 

 

CAT.NO.DESCRIPTION
2094MI MULTITESTER
DV-20 WATER DISTILLER (20l/h)
DV-8 WATER DISTILLER (8l/h)
KK-3500 CLIMATIC CHAMBER 3552 L (1200x1600x1850 mm), 10°C to + 70 °C, RH 30 to 95 %
KK1000 CLIMATIC CHAMBER 1000 L, 5°C to + 95 °C, RH 15 to 95 %
KK1000 CHL CLIMATIC CHAMBER 1000 L (1000x1000x1000 mm), -30°C to + 100 °C, RH 10 to 95 %
KK1000 CHLT CLIMATIC CHAMBER 1000 L (1000x1000x1000 mm), -75°C to + 180 °C, RH 10 to 98 %
KK1000CH CLIMATIC CHAMBER 1000 L (1000x1000x1000 mm), -45 °C to 120 °C, RH 15 to 97 %
KK105 CLIMATIC CHAMBER 105 L, 5°C to + 95 °C, RH 15 to 95 %
KK1440CH CLIMATIC CHAMBER 1440 L (1000x1200x1200 mm), 10°C to + 180 °C, RH 10 to 95 %
KK190 CLIMATIC CHAMBER 190 L, 5°C to + 95 °C, RH 15 to 95 %
KK190LT CLIMATIC CHAMBER 190 L, EXTENDED TEMP RANGE, -75°C to + 180 °C, RH 15 to 95 %
KK2000CH CLIMATIC CHAMBER 2000 L (1050 x 1200 x 1600 mm), -40°C to + 150 °C, RH 10 to 98 %
KK265 CLIMATIC CHAMBER 252 L, 5°C to + 95 °C, RH 15 to 95 %
KK4075 CLIMATIC CHAMBER 4075 L, 5°C to + 95 °C, RH 15 to 95 %
KK500 CLIMATIC CHAMBER 495 L, 5°C to + 95 °C, RH 15 to 95 %
KK600L TEMPERATURE AND HUMIDITY CHAMBER 612 L, T= -40..90 deg C, % RH 10..95%
KKXX CLIMATIC CHAMBERS
OB-7/2 CALIBRATION BATH 7L (TCW +8°C to 250°C +/- 0,02 °C, ID100 mm x 230 mm)
OB-7/2H CALIBRATION BATH 7L (TCW -40°C to 130°C +/- 0,02 °C, ID100 mm x 230 mm)
SP105 HEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 105 L
SP105C HEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 105 L
SP1200CK TEMPERATURE CHAMBER 1200 l , 0°C to 300 °C
SP120E HEATING CHAMBER WITH FORCED CONVECTION - EASY Ta+5 to 300 deg.C 120 L
SP1300C HEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 1288 L
SP160 HEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 163 L
SP160C HEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 163 L
SP190 HEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 190 L
SP190C HEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 190 L
SP210 HEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 210 L
SP210C HEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 210 L
SP240E HEATING CHAMBER WITH FORCED CONVECTION - EASY Ta+5 to 300 deg.C 240 L
SP250 HEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 250 L
SP250C HEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 250 L
SP25E HEATING CHAMBER WITH FORCED CONVECTION - EASY Ta+5 to 300 deg.C 25 L
SP265 HEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 264 L
SP265C HEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 264 L
SP440 HEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 440 L
SP440C HEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 440 L
SP45 HEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 44 L
SP45C HEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 44 L
SP55E HEATING CHAMBER WITH FORCED CONVECTION - EASY Ta+5 to 300 deg.C 55 L
SP910C HEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 910 L
SPXXE HEATING CHAMBERS WITH FORCED CONVECTION - EASY
T1-02 HEATING DEVICE
T1-04 HEATING DEVICE CONTROLLER
T1-11 FUME CUPBOARD (PROTECTIVE CABINET, TEST CHAMBER) 850 l
T1-12 FUME CUPBOARD (PROTECTIVE CABINET) 1000 x 1000 x 1500 mm
T1-13 DUST CHAMBER 3 m3
T1-14 FUME CUPBOARD 0,5 m3
T1-15 DUST CHAMBER 800x800x900 mm
T1-16 DUST CHAMBER 2000x1000x1000 mm
T1-17 DUST CHAMBER 1000x1000x1000 mm
T1-18 DUST CHAMBER 1400x700x700 mm
T1-19 DRIP BOX 700 x 700 mm
T1-20 DRIP BOX 500 x 500 mm
T1-21 DRIP BOX 500 x 1000 mm
T1-23 WATER SUPPLY UNIT FOR DRIP BOX
T1-25 TURNTABLE FOR DRIP BOX
T1-26 TUBE FOR SPRAY APPARATUS, R 200, ?60, ?90°
T1-27 TUBE FOR SPRAY APPARATUS, R 400, ?60, ?90°
T1-28 TUBE FOR SPRAY APPARATUS R 600 ?60,?90°
T1-29 TUBE FOR SPRAY APPARATUS, R 800, ?60, ?90°
T1-30 TUBE FOR SPRAY APPARATUS, R 1000, ?60, ?90°
T1-32 MOTOR DRIVE FOR SPRAY APPARATUS
T1-35 TELESCOPE SUPPORT 270x180
T1-36 SPRAY NOZZLE
T1-37 WALL ELECTROLIFT FOR DRIP BOX
T1-40 WALL CARRIER FOR DRIP BOX (700x700) (h=4000mm)
T1-41 WATER JET HOSE NOZZLE DIA. 6,3 mm
T1-42 WATER JET HOSE NOZZLE DIA. 12,5 mm
T1-43 SPLASH NOZZLE (IEC 60335-2-64, 60335-2-58, Fig. 101)
T1-45 JET TEST SET
T1-51 DUST CHAMBER WxDxH 700X1100x600 mm
T1-55 DRAUGHT - PROOF ENCLOSURE FOR LUMINARIES 2x2x2 m (IEC 60598-1, Annex D)
T1-56 DRAUGHT - PROOF ENCLOSURE FOR LUMINARIES 2,5x1,8x3 m (IEC 60598-1, Annex D)
T1-59 TEST ENCLOSURE FOR MEASUREMENT OF SMOKE DENSITY OF CABLES 3x3x3m (IEC 61034-1)
T1-60 APPARATUS FOR HEATING TEST WITH 4 - 10 A FLUSH-MOUNTED APPLIANCE INLETS C16 (INSUL. SHROUD)
T1-61 APP. FOR HEATING TEST WITH 4 - 10 A FLUSH-MOUNTED APPLIANCE INLETS C16A (INSUL. SHROUD)
T1-62 APP. FOR HEATING TEST WITH 4 - 16 A SURFACE-MOUNTED APPLIANCE INLETS C22 (METAL SHROUD)
T1-63 POWER REGULATOR FOR T1-65
T1-65 WATER EVAPORATION APPARATUS FOR REFRIGERATORS (IEC 60335-2-24, Fig. BB.1)
T1-66 WATER SPILLAGE APPARATUS FOR REFRIGERATORS (IEC 60335-2-24, Fig. 101)
T1-71 TUBE FOR SPRAY APPARATUS, R 1200, ?60, ?90°
T1-75C PROGRAMMABLE WALK IN CHAMBER 3x3x3m t - 40 °C to + 90 °C , 15% to 95% RH
T1-76 PLYWOOD TEST CABINET 500 × 500 × 500 mm (IEC 60400 Cl. 17.1)
T1-77 CHAMBER FOR WATER TESTS IPX1-4 WITH DRIP BOX (500x500mm), OSCILLATING TUBE (R200) AND TURNTABLE
T1-77A WATER DISTILLER WITH PUMP FOR CLEANING THE T1-77 AFTER TESTING
T1-77B SYSTEM FOR WATER RECYCLING OF T1-77
T1-78 HEATING ENCLOSURE FOR THERMALLY PROTECTED BALLASTS (IEC 61347-1)
T1-79 TEST CHAMBER FOR MEASUREMENT OF SMOKE DENSITY OF CABLES BURNING UNDER DEFINED CONDITIONS 3x3x3m (IEC 61034-1, 60331-11)
T2-01 TUMBLING BARREL h=350mm
T2-02 TUMBLING BARREL h=500 mm
T2-04 TUMBLING BARREL
T2-04A BARREL OF T2-04
T2-06 PENDULUM IMPACT TEST APPARATUS - MECHANISM
T2-07 MOUNTING DEVICE FOR IMPACT TEST m 10kg, 175 x 175
T2-08 MOUNTING DEVICE FOR IMPACT TEST DIA. 175
T2-10 BRAKE FOR T2-11 WITH FASTENING DEVICE
T2-100 DEVICE FOR CHECKING THE FIXATION OF PLUG PINS (VDE 0620-1 F. 31)
T2-101 DEVICE FOR CHECKING THE FIXATION OF PLUG PINS (VDE 0620-1 F. 31)
T2-102 DEVICE FOR CHECKING THE SIDE EARTHING CONTACTS (VDE 0620-1 F. 43)
T2-103 G13 MOUNTING JIG FOR THE TESTING OF LAMPHOLDERS (IEC 60400, Fig. 1)
T2-104 TOOL FOR VERIFICATION OF MAXIMUM WITHDRAWAL FORCE (NEN 1020)
T2-105 TOOL FOR VERIFICATION OF MINIMUM WITHDRAWAL FORCE (NEN 1020)
T2-11 TORSION APPARATUS 4 Nm
T2-12 BENDING APPARATUS FOR LAMPHOLDERS (IEC 60238 Fig. 12)
T2-13 DEVICE FOR WITHDRAWAL FORCE MEASURING
T2-14 APPARATUS FOR VERIFICATION OF MAXIMUM WITHDRAWAL FORCE
T2-15 PRESSURE APPARATUS (IEC 60238, Fig. 9)
T2-16 APPARATUS FOR PRESSURE TEST ON SHROUDS (IEC 60320-1, F. 20)
T2-17 APPARATUS FOR PULLING TEST (IEC 60320-1, F. 19)
T2-18 APP. FOR TESTING THE CORD RETENTION
T2-19 IMPACT APP. FOR GRIPPING LUGS
T2-20 APPARATUS FOR TESTING CORD RETENTION (IEC 60884-1, Fig. 20)
T2-21 IMPACT WEIGHT APPARATUS
T2-22 INTERMEDIATE PE FOR T2-21 FOR LOW TEMP. TEST
T2-23 INTERMEDIATE PE FOR T2-21 FOR PIN INSULATING SLEEVES
T2-25 SLIDING WEIGHT 100 g FOR T2-21
T2-28 SLIDING WEIGHT 250 g FOR T2-21
T2-34 SLIDING WEIGHT 1000 g FOR T2-21
T2-40 AXIAL PULL TEST APPARATUS (IEC 60127-2, Fig. 7)
T2-41 TEST FUSE BASE I max.10A (IEC 60127-2, Fig. 1)
T2-42 TEST FUSE BASE I > 10A (IEC 60127-2, Fig. 2)
T2-43 TEST FUSE BASE FOR BREAKING CAPACITY (IEC 60127-2, Fig. 3)
T2-44 MECHANICAL SHOCK TEST APPARATUS (IEC 60898-1)
T2-45 BUMP TEST APPARATUS 1000 x 600 mm, IEC 60065
T2-46 PENDULUM IMPACT - TEST APPARATUS-POLYAMIDE HAMMER 150g
T2-47 PENDULUM IMPACT-TEST APPARATUS-STEEL HAMMER 150g
T2-48 PENDULUM IMPACT-TEST APPARATUS-STEEL HAMMER 250g
T2-49 PENDULUM IMPACT-TEST APPARATUS-STEEL HAMMER 500g
T2-50 PENDULUM IMPACT-TEST APPARATUS-STEEL HAMMER 1500g
T2-51 PENDULUM IMPACT-TEST APPARATUS-STEEL HAMMER 5000g
T2-52 MOUNTING BLOCK FOR FLUSH TYPE EQUIPMENT
T2-53 TRIGGER FOR HAMMERS T2-49, T2-50 and T2-51
T2-54 TORSION APPARATUS 20 Nm
T2-58 TORSION APPARATUS 0.5 Nm (IEC 60335-1, 60950-1)
T2-59 ARRANGEMENT FOR MECHANICAL STRENGTH TEST ON MULTIPLE PORTABLE SOCKET-OUTLETS (IEC 60884-1, BS 1363-2)
T2-60 PENDULUM IMPACT-TEST APPARATUS-POLYAMIDE HAMMER 250g
T2-63 TUMBLING BARREL h=500 mm (IEC60068-2-32)
T2-64 ARRANGEMENT FOR COMPRESSION TEST OF 24.5 (150 N, 300 N) (IEC 60884-1, FIG. 8, Cl. 10.1)
T2-65 APPARATUS FOR TESTING SCREW-TYPE TERMINALS (IEC 60884-1, Fig. 11)
T2-66 APPARATUS FOR TESTING DURABILITY OF MARKINGS ON RATING LABELS
T2-69 ARRANGEMENT FOR CHECKING DAMAGE TO CONDUCTORS (IEC 60884-1, Fig. 11)
T2-70 INCLINED PLANE 1000 x 1000 mm
T2-71 TILTED SUPPORT FOR IPX2 TEST 500 x 500
T2-72 APPARATUS FOR WINDING A FLEXIBLE PIPE
T2-73 APPARATUS FOR CHECKING SECURITY OF LAMPHOLDER CONTACTS
T2-74 CORD ANCHORAGE TORQUE DEVICE
T2-76 DEVICE FOR MEASURING THE CONTACT PRESSURE OF EARTHING CONTACTS OF 10/16A 250 V TWO-POLE SOCKET-OUTLETS WITH SIDE EARTHING-CONTACTS (F. 23, CEE 7, VDE 0620-1 F. 14)
T2-77 PLUG PIN DEFLECTION TEST APPARATUS FOR RESILIENT PLUGS (BS 1363-1, Fig. 8, Cl. 12.12)
T2-78 APPARATUS FOR MECHANICAL STRENGTH TEST ON RESILIENT COVERS WITH HARDWOOD BLOCK (BS 1363-1, Cl. 9, Fig. 2a, 2b)
T2-79 APPARATUS FOR TESTS ON PLUG PINS (BS 1363-1, Fig. 32, Cl. 12.9.4)
T2-80 APPARATUS FOR TORSION TEST ON PINS (BS 1363-1, Fig. 33, Cl. 12.9.6)
T2-81 APPARATUS FOR PULL TEST ON BS PLUGS (100N, W/MOUNTING PLATE) (BS 1363-1, Fig. 7, Cl. 12.11.1)
T2-82 TOOL FOR VERIFICATION OF MAXIMUM WITHDRAWAL FORCE (SSA 444, IEC 60884-1)
T2-83 TOOL FOR VERIFICATION OF MAXIMUM WITHDRAWAL FORCE (EN 50075, IEC 60884-1)
T2-84 TOOL FOR VERIFICATION OF MAXIMUM WITHDRAWAL FORCE (DIN 49406, IEC 60884-1)
T2-85 TOOL FOR VERIFICATION OF MINIMUM WITHDRAWAL FORCE (SMALL SSA 444, IEC 60884-1)
T2-86 TOOL FOR VERIFICATION OF MINIMUM WITHDRAWAL FORCE (LARGE SSA 444, IEC 60884-1)
T2-87 TOOL FOR VERIFICATION OF MINIMUM WITHDRAWAL FORCE (DIN 49406, IEC 60884-1)
T2-88 TOOL FOR VERIFICATION OF MINIMUM WITHDRAWAL FORCE (EN 50075, IEC 60884-1)
T2-89 BUMP TEST APPARATUS 1500 x 1000 mm, 100 kg, IEC 60065
T2-91 G5 MOUNTING JIG FOR THE TESTING OF LAMPHOLDERS (IEC 60400, Fig. 1)
T2-92 FIXTURE FOR THE TESTING OF LAMPHOLDER FLEXIBILITY (IEC 60400, Fig. 3)
T2-93 TUMBLING BARREL h=500 mm (BS 1363-1, Fig. 20)
T2-94 APPARATUS FOR CHECKING THE STABILITY OF SIDE EARTHING CONTACTS (VDE 0620-1 F. 15)
T2-95 TEST PLUG 16 A (VDE 0620-1 F. 16A)
T2-96 TEST PLUG 3-PHASE 16 A (VDE 0620-1 F. 16b)
T2-97 TEST PLUG 3-PHASE 25 A (VDE 0620-1 F. 16c)
T2-98 TEST PLUG 2,5 A (VDE 0620-1 F. 16d)
T2-99 DEVICE FOR CHECKING THE FIXATION OF PLUG PINS (VDE 0620-1 F. 31)
T3-01 EARTH BOND RESISTANCE TESTER 12 (6) V a.c., I max. 33A
T3-04 APP. FOR SOCKET-OUTLETS BREAKING CAP. AND NORMAL OP. TEST
T3-05 SURGE TEST APPARATUS
T3-06 TEST CIRCUIT A FOR SWITCHES
T3-07 TEST CIRCUIT FOR SWITCHES 200 A
T3-08 TEST CIRCUIT FOR SWITCHES 80 A
T3-09 TEST CIRCUIT FOR SWITCHES
T3-10 APPARATUS FOR CIRCULAR AND ANGULAR MOVEMENTS
T3-12 APPARATUS FOR NORMAL OPERATION TEST OF LAMPHOLDERS (FOR USE WITH T3-10)
T3-13 CABLE FLEXING APPARATUS
T3-15 APPARATUS FOR AUTOMATIC REEL CORD TESTING
T3-20 APPARATUS FOR FLEXING TEST (IEC 60884-1, BS 1343-1)
T3-25 APP. FOR BREAKING CAPACITY AND NORMAL OPERATION TESTS (IEC 320)
T3-26 APP. FOR BREAKING CAPACITY AND NORMAL OPERATION TESTS (DOUBLE SIDED, IEC 320)
T3-27 APP. FOR SOCKET-OUTLETS BREAK. CAP. AND NORMAL OP. TEST (DOUBLE SIDED, IEC 884-1)
T3-30 ADDITIONAL PARTS FOR T3-10 FOR TOASTERS FLEXING TEST
T3-44 PROBE FOR MEASURING SURFACE TEMPERATURE (IEC 60335-2-6)
T3-53 TIMER WITH THERMOMETER
  THERMOCOUPLE WITH THE COPPER BLOCK Dia. 4 mm (IEC 60695-11-5, 60335-1, 60959-1)
T3-53B THERMOCOUPLE WITH THE COPPER BLOCK Dia. 9 mm (IEC 60695-11-3, ASTM D 5027)
T3-53C THERMOCOUPLE WITH THE COPPER BLOCK Dia. 5,5 mm (IEC/TS 60695-11-4, ASTM D 5027)
T3-54A FLAME HEIGHT GAUGE (IEC 60695-11-5, 60335-1, 60959-1)
T3-54B FLAME HEIGHT GAUGE (IEC/TS 60695-11-3)
T3-54C FLAME HEIGHT GAUGE (IEC/TS 60695-11-4)
T3-54D CLEARANCE GAUGE (IEC/TS 60695-11-4)
T3-61 IMPULSE GENERATOR 1,2/50 µs, 12 kV
T3-62 IMPULSE GENERATOR 10/700 ?s, 6 kV (IEC 60950, 61180-1, 61180-2)
T3-64 APPARATUS FOR NORMAL OPERATION TESTS OF SOCKET OUTLETS (BS 1363-2, Cl. 18)
T3-70 MICROWAVE OVEN DOOR ENDURANCE TESTER
T4-03 BALL PRESSURE TEST APPARATUS
T4-04 DEVICE FOR TESTING NON-SOLID PINS 100 N
T4-07 GLOW WIRE TEST APPARATUS
T4-07A THERMOCOUPLE FOR GLOW WIRE TEST APPARATUS
T4-07B WIRE LOOP FOR GLOW WIRE TEST APPARATUS
T4-07T TIMER FOR GLOW WIRE TEST APPARATUS
T4-08 GLOW WIRE TEST APPARATUS
T4-08A THERMOCOUPLE DIA. 0,5 mm FOR GLOW WIRE TEST APPARATUS
T4-08B WIRE LOOP FOR GLOW WIRE TEST APPARATUS (FOR THERMOCOUPLE DIA. 0,5 mm)
T4-08D SILVER FOIL 2 mm2 - 20 pcs.
T4-08E THERMOCOUPLE DIA. 1 mm FOR GLOW WIRE TEST APPARATUS
T4-08F WIRE LOOP FOR GLOW WIRE TEST APPARATUS (FOR THERMOCOUPLE DIA. 1 mm)
T4-08G WIRE LOOP FOR GLOW WIRE TEST APPARATUS (STRAIGHT FOR THERMOCOUPLE DIA. 0,5 mm)
T4-08H WIRE LOOP FOR GLOW WIRE TEST APPARATUS (STRAIGHT FOR THERMOCOUPLE DIA. 1 mm)
T4-09 SOLDERABILITY TEST APPARATUS (IEC 60068-2-20/Test T: Test Ta Method 1, Test Tb Method 1A, 1B)
T4-10 HIGH FREQUENCY SPARK GENERATOR
T4-18 APP. FOR PLUG PIN ABRASION (IEC 60884-1, BS 1363-1)
T4-19 APPARATUS FOR COMPRESSION TEST FOR THE VERIFICATION OF RESISTANCE TO HEAT
T4-20 ABRASION APPARATUS
T4-22 POWER SUPPLY 12 kV DC, 2 mA
T4-29 APPARATUS FOR PRESSURE TEST AT HIGH TEMPERATURE
T4-31 NEEDLE FLAME BURNER DIA. 0.5 mm (IEC 60695-11-5)
T4-33 BUNSEN BURNER
T4-34 BUNSEN BURNER FISH TAIL
T4-36 MECHANISMUS FOR BURNING TESTS (VERT. AND HORIZ.)
T4-37 NEEDLE FLAME TESTER
T4-38 BURNER TEST SET
T4-40 POWER SUPPLY FOR T4-53
T4-41 TRACKING TEST APPARATUS 600V
T4-41A ELECTRODES FOR TRACKING TEST APPARATUS (PAIR)
T4-41C NOZZLE FOR TRACKING TEST APPARATUS
T4-41D DISTANCE GAUGE FOR TRACKING TEST APPARATUS
T4-41E AMMONIUM CHLORIDE SOLUTION 1 l
T4-41F CALIBRATED WEIGHTS M1 IN WOODEN BOXES, 1 g and 100 g WITH CERTIFICATES
T4-42 TRACKING TEST APPARATUS (1000V)
T4-47 APPARATUS FOR HIGH CURRENT ARCHING
T4-50 ELECTRODE ARRANGEMENT 65
T4-52 APPARATUS FOR HIGH-VOLTAGE LOW-CURRENT ARCHING
T4-53 TEST FIXTURE FOR HOT WIRE COIL IGNITABILITY TEST (IEC 60695-2-20, Fig. 3, IEC 60950-1)
T4-54 WINDING DEVICE FOR HOT WIRE COIL IGNITABILITY TEST (IEC 60695-2-20, Fig. 4, IEC 60950-1)
T4-55 NiCr WIRE 80/20, DIA. 0.5 mm, 100 m FOR HOT WIRE IGNITION TEST (IEC 60695-2-20, IEC 60950-1)
T4-56 ELECTRODE ARRANGEMENT for EN 50 028
T4-57 MANDREL TEST APPARATUS (IEC 60950-1, Annex AA)
T4-58 APPARATUS FOR SCRATCHING COOLING SYSTEMS (IEC 60335-2-24, Fig. 102)
T4-59 APPARATUS FOR TESTING RESISTANCE TO FLEXING AND ABRASION OF HOSES (IEC 60335-2-2, Fig. 101 and 102)
T4-61 BURNER 1000W (IEC 60695-11-2)
T4-62 GAS AND AIR SUPPLY UNIT FOR T4-61 (FLOWMETERS ?2%)
T4-63 GAS AND AIR SUPPLY UNIT FOR T4-61 (FLOWMETERS ?4%)
T4-64 METALLIC SCREEN WITH BURNER STAND (IEC 60332-1)
T4-65 BURNER 50, 500 W (IEC 60695-11-4 A, IEC 60695-11-3 A)
T4-66 GAS SUPPLY UNIT FOR T4-65 and T4-70 (ISO 9772, IEC 60695-11-3, 500W, FLOWMETER ?2%, VALVE AND MANOMETER)
T4-67 GAS SUPPLY UNIT FOR T4-65 (IEC 60695-11-4, 50W, FLOWMETER ?2%, VALVE AND MANOMETER)
T4-69 APPARATUS FOR PRESSURE TEST (BS 1363-1, Fig. 23)
T4-70 WING TOP BURNER (ISO 9772)
T4-70A WING TOP FOR T4-70 (ISO 9772) - spare part
T4-71 SUPPORT GAUZE HOLDER (ISO 9772)
T4-72 BURNER WITH VENTURI MIXER FOR BURNING CABLES 500 mm (IEC 60331-11)
T4-73 GAS SUPPLY UNIT FOR T4-72, T4-61 (IEC 60331-11, IEC 60695-11-2, WITH MASS FLOWMETERS)
T4-74 CABLE SUPPORTING ARRANGEMENT (IEC 60331-11)
T5-00 GAUGE MAINTENANCE KIT
T5-08 TEST CORNER 800 x 800 x 1200 mm, 480 THERMOCOUPLES
T5-101 GAUGE FOR HOLES FOR BACKPLATE LAMPHOLDERS SCREWS (IEC 60238, Fig. 3)
T5-102 E14 TEST CAP FOR NORMAL OPERATION TEST (IEC 60238, Fig. 5)
T5-103 E27 TEST CAP FOR NORMAL OPERATION TEST (IEC 60238, Fig. 5)
T5-104 E40 TEST CAP FOR NORMAL OPERATION TEST (IEC 60238, Fig. 5)
T5-105 E27 GAUGE FOR DETECTING SIDE-CONTACTS WITH CUTTING-EDGES (7006-22B-1)
T5-106 E27 GAUGE FOR TESTING PROTECTION AGAINST BULB-NECK DAMAGE AND FOR TESTING CONTACT-MAKING IN LAMPHOLDERS (7006-21-5)
T5-11 E14 TEST CAP FOR TORQUE TESTS
T5-110 E14 PLUG GAUGE FOR LAMPHOLDERS FOR TESTING CONTACT MAKING (7006-30-2)
T5-111 E12 PLUG GAUGE FOR TESTING CONTACT MAKING (7006-25C-1)
T5-112 E12 "NOT GO" PLUG GAUGE (7006-26B-1)
T5-113 E12 "GO" PLUG GAUGE (7006-32A-1)
T5-114 TEST PROBE "a" DIA. 12, EN 50144-2-5, IEC 60745-2-5
T5-115 E14 PLUG GAUGE FOR LAMPHOLDERS WITH CANDLE SHAPED SHAFT FOR CANDLE LAMPS FOR TESTING CONTACT MAKING (7006-30A-1)
T5-116 SMALL TEST FINGER - test probe 19
T5-117 TEST ROD DIA. 8 X 230 mm (IEC 60335-2-14 cl. 20.102)
T5-118 TEST PIN DIA. 3 x 100 mm
T5-119 GAUGE FOR THE VERIFICATION OF THE OUTLINE OF COVERS OR COVER-PLATES
T5-12 E27 TEST CAP FOR TORQUE TESTS
T5-120 CYLINDRICAL STEEL ROD, DIA. 3 mm (IEC 60884-1, Cl. 24)
T5-122 "NOT GO" GAUGE FOR E12 CAPS ON FINISHED LAMPS 7006-28C-1
T5-123 ALIGNMENT GAUGE FOR FUSE 5 x 20 mm (IEC 60127-2, Fig. 4)
T5-124 ALIGNMENT GAUGE FOR FUSE 6.3 x 32 mm (IEC 60127-2, Fig. 4)
T5-125 MAX. GAUGE FOR FUSES 5 x 20 mm
T5-126 MIN. GAUGE FOR FUSES 5 x 20 mm
T5-127 MAX. GAUGE FOR FUSES 6.3 x 32 mm
T5-128 MIN. GAUGE FOR FUSES 6.3 x 32 mm
T5-129 SOLID LINK FOR TEST ON FUSE CLIPS (BS 1363-1, Fig. 19, Cl. 20)
T5-13 E40 TEST CAP FOR TORQUE TESTS
T5-130 ELECTRICAL INDICATOR
T5-131 DEVICE FOR CHECKING THE RESISTANCE TO LATERAL STRAIN OF 10/16A 250 V TWO-POLE FIXED SOCKET OUTLETS (IEC 60884-1, CEE 7)
T5-132 GY6.35 GAUGE FOR CHECKING MIN. RETENTION FORCE OF CONTACTS IN LAMPHOLDERS (7006-59D-2)
T5-133 G6.35, GX6.35 & GY6.35 "GO" GAUGE FOR LAMPHOLDERS 15 (7006-61B-4)
T5-134 G6.35 & GX6.35 GAUGE FOR CHECKING MIN. RETENTION FORCE OF CONTACTS IN LAMPHOLDERS (7006-61C-4)
T5-135 GX5.3 & GU5.3 SINGLE PIN GAUGE FOR CHECKING CONTACT MAKING IN LAMPHOLDERS (7006-73G-2)
T5-136 GX5.3 GAUGE FOR CHECKING MAX. WITHDRAWAL FORCE OF CONTACTS IN LAMPHOLDERS (7006-73F-2)
T5-138 ADDITIONAL "GO" GAUGE FOR E12 CAPS ON FINISHED LAMPS 7006-27J-1
T5-139 "GO" GAUGE FOR E12 CAPS ON FINISHED LAMPS (7006-27H-1)
T5-14 E14 MANDREL FOR BENDING TEST (IEC 60238 Fig. 12)
T5-146 GAUGE FOR FINISHED LAMPS FITTED WITH E40 CAPS FOR TESTING PROTECTION AGAINST ACCIDENTAL CONTACT (7006-53-1)
T5-147 GAUGE FOR FINISHED LAMPS FITTED WITH E40 CAPS FOR TESTING CONTACT MAKING (7006-52-1)
T5-148 "NOT GO" GAUGE FOR CAPS ON FINISHED LAMPS E40 (7006-28D-1)
T5-149 "GO" GAUGE FOR CAPS ON FINISHED LAMPS E40 (7006-27-7)
T5-15 E27 MANDREL FOR BENDING TEST (IEC 60238 Fig. 12)
T5-150 E27 GAUGE "GO" C13A
T5-151 E27 GAUGE "NOT GO" C13E
T5-152 E33 GAUGE "GO" C13B
T5-153 E33 GAUGE "NOT GO" C13F
T5-154 R1? GAUGE "GO" C13C
T5-155 R1? GAUGE "NOT GO" C13G
T5-156 R2 GAUGE "GO" C13D
T5-157 R2 GAUGE "NOT GO" C13H
T5-158 E27 GAUGE "GO" C14A
T5-159 E27 GAUGE "NOT GO" C14E
T5-16 E40 MANDREL FOR BENDING TEST (IEC 60238 Fig. 12)
T5-160 E33 GAUGE "GO" C14B
T5-161 E33 GAUGE "NOT GO" C14F
T5-162 R1? GAUGE "GO" C14C
T5-163 R1? GAUGE "NOT GO" C14G
T5-164 R2 GAUGE "GO" C14D
T5-165 R2 GAUGE "NOT GO" C14H
T5-166 E10 TEST CAP FOR TORQUE TESTS
T5-167 E26 TEST CAP FOR TORQUE TESTS
T5-168 E27 GAUGE FOR TESTING CONTACT MAKING AND PROT. AGAINST ACC. CON. DURING INSERTION (7006-22A-5)
T5-169 E14 GAUGE FOR TESTING CONTACT MAKING AND PROT. AGAINST ACC. CON. DURING INSERTION (7006-31-5)
T5-17 PUSH-PULL DYNAMOMETER 20N
T5-170 W3/16 GAUGE "GO" C15A
T5-171 W3/16 GAUGE "NOT GO" C15B
T5-172 W3/16 GAUGE "GO" C15C
T5-173 W3/16 GAUGE "NOT GO" C15D
T5-175 D II. GAUGE C16A
T5-176 D III. GAUGE C16B
T5-177 D IV.H GAUGE C16C
T5-178 D V.H GAUGE C16D
T5-18 PUSH-PULL DYNAMOMETER 50N
T5-180 D II. GAUGE C17A
T5-181 D III. GAUGE C17B
T5-182 D IV.H GAUGE C17C
T5-183 D V.H GAUGE C17D
T5-185 DEVICE FOR CHECKING THE RESISTANCE TO LATERAL STRAIN (DIN 49406, IEC 60884-1)
T5-186 DEVICE FOR CHECKING THE RESISTANCE TO LATERAL STRAIN (SSA 444, IEC 60884-1)
T5-187 DEVICE FOR CHECKING THE RESISTANCE TO LATERAL STRAIN (EN 50075, IEC 60884-1)
T5-19 PUSH-PULL DYNAMOMETER 100N
T5-190 E26 TEST CAP FOR TORQUE TESTS (7004-21A-2)
T5-191 E12 TEST CAP FOR TORQUE TESTS (7004-28-2)
T5-192 E17 TEST CAP FOR TORQUE TESTS (7004-26-2)
T5-193 SKIRTED E26 TEST CAP FOR TORQUE TESTS (7004-130-1)
T5-194 E26d TEST CAP FOR TORQUE TESTS (7004-29-2)
T5-195 E27/51x39 TEST CAP FOR TORQUE TESTS (7004-27-3)
T5-196 B22d TEST CAP FOR TORQUE TESTS (7004-10-7)
T5-197 B15d TEST CAP FOR TORQUE TESTS (7004-11-6)
T5-198 TEST PIN DIA. 1 x 60 mm, WITH 5 N SPRING (BS 1363-2, Cl. 9.4.1)
T5-200 CONTACT GAUGE 0,2 A (IEC 60320-1, F. 27)
T5-201 NO CONTACT GAUGE 0,2 A (IEC 60320-1, F. 27)
T5-202 CONTACT GAUGE 2,5 A (IEC 60320-1, F. 27)
T5-203 NO CONTACT GAUGE 2,5 A (IEC 60320-1, F. 27)
T5-204 CONTACT GAUGE 6 A (IEC 60320-1, F. 27)
T5-205 NO CONTACT GAUGE 6 A (IEC 60320-1, F. 27)
T5-206 CONTACT GAUGE 10 A (IEC 60320-1, F. 27)
T5-207 NO CONTACT GAUGE 10 A (IEC 60320-1, F. 27)
T5-208 CONTACT GAUGE 16 A (IEC 60320-1, F. 27)
T5-209 NO CONTACT GAUGE 16 A (IEC 60320-1, F. 27)
T5-21 TEST KNIFE SIZE 00
T5-210 GO GAUGE FOR CONNECTORS TO STANDARD SHEET C13 AND C17 (IEC 60320-1, FIG. 9F)
T5-211 NOT-GO GAUGE FOR CONN. TO STANDARD SHEET C13 AND C17 (IEC 60320-1, FIG. 9G)
T5-212 GO GAUGE FOR APPLIANCE INLETS TO STANDARD SHEETS C14, C16 AND C18 (IEC 60320-1, FIG. 9H)
T5-213 GO GAUGE FOR CONN. TO STANDARD SHEET C15 (IEC 60320-1, FIG. 9J)
T5-214 GO GAUGE FOR CONNECTORS TO STANDARD SHEET C15 A (IEC 60320-1, FIG. 9S)
T5-215 NOT GO GAUGE FOR CONN. TO STANDARD SHEET C13, C15 & C17 (IEC 60320-1, FIG. 9R)
T5-216 GO GAUGE FOR APPLIANCE INLETS TO STANDARD SHEET C16A (IEC 60320-1, FIG. 9T)
T5-22 TEST KNIFE SIZE 0
T5-220 APPLIANCE INLET GAUGE FOR MAX. WITHDRAWAL FORCE CHECKING C14 (IEC 60320-1, Cl. 16)
T5-221 APPLIANCE INLET GAUGE FOR MAX. WITHDRAWAL FORCE CHECKING - C16 (IEC 60320-1, Cl. 16)
T5-222 APPLIANCE INLET GAUGE FOR MAX. WITHDRAWAL FORCE CHECKING - C16 A (IEC 60320-1, Cl. 16)
T5-225 APPLIANCE INLET GAUGE FOR BREAKING CAPACITY TEST - C14
T5-226 APPLIANCE INLET GAUGE FOR BREAKING CAPACITY TEST - C16
T5-23 TEST KNIFE SIZE 1
T5-235 CONTACT GAUGE FOR EARTHING CONTACT 2,5 A
T5-236 NO CONTACT GAUGE FOR EARTHING CONTACT 2,5 A
T5-237 CONTACT GAUGE FOR EARTHING CONTACT 16 A
T5-238 NO CONTACT GAUGE FOR EARTHING CONTACT 16 A
T5-24 TEST KNIFE SIZE 2
T5-25 TEST KNIFE SIZE 3
T5-250 APPLIANCE INLET GAUGE FOR TEMPERATURE RISE MEASUREMENTS - C14
T5-251 APPLIANCE INLET GAUGE FOR TEMPERATURE RISE MEASUREMENTS - C16
T5-252 APPLIANCE INLET GAUGE FOR TEMPERATURE RISE MEASUREMENTS - C16 A
T5-253 APPLIANCE INLET GAUGE FOR TEMPERATURE RISE MEASUREMENTS C22
T5-259 APPLIANCE INLET GAUGE FOR PULLING TEST - C24
T5-26 TEST KNIFE SIZE 4
T5-260 APPLIANCE INLET GAUGE FOR PULLING TEST C14
T5-261 APPLIANCE INLET GAUGE FOR PULLING TEST - C16
T5-262 APPLIANCE INLET GAUGE FOR PULLING TEST - C16 A
T5-263 APPLIANCE INLET GAUGE FOR PULLING TEST - C2
T5-264 APPLIANCE INLET GAUGE FOR PULLING TEST - C6
T5-265 APPLIANCE INLET GAUGE FOR PULLING TEST - C8
T5-266 APPLIANCE INLET GAUGE FOR PULLING TEST - C10
T5-267 APPLIANCE INLET GAUGE FOR PULLING TEST - C18
T5-268 APPLIANCE INLET GAUGE FOR PULLING TEST - C20
T5-269 APPLIANCE INLET GAUGE FOR PULLING TEST - C22
T5-27 TEST KNIFE SIZE 4a
T5-270 E14 TEST CAP A (IEC 60238, Fig. 13)
T5-273 E14 TEST CAP B (IEC 60238, Fig. 13)
T5-274 E27 TEST CAP B (IEC 60238, Fig. 14)
T5-275 TEST CAP FOR LAMPHOLDERS E40 (IEC 60238 Fig. 15)
T5-276 E27 GAUGE I. FOR TESTING RESILIENCE OF SIDE CONTACT (7006-22C-1)
T5-277 E27 GAUGE II. FOR TESTING RESILIENCE OF SIDE CONTACT (7006-22D-1)
T5-28 FOOT PROBE (EN 836, Fig. 3)
T5-280 E14 TEST CAP FOR INSUL. RESISTANCE TESTING AND TEMP. RAISE MEASURING (IEC 60238 Fig. 11)
T5-281 E27 TEST CAP FOR INSUL. RESISTANCE TESTING AND TEMP. RAISE MEASURING (IEC 60238 Fig. 11)
T5-282 E40 TEST CAP FOR INSUL. RESISTANCE TESTING AND TEMP. RAISE MEASURING (IEC 60238 Fig. 11)
T5-283 E10 TEST CAP FOR INSUL. RESISTANCE TESTING AND TEMP. RAISE MEASURING (IEC 60238 Fig. 11)
T5-284 GAUGE FOR TESTING CONTACT-MAKING OF LAMPS FITTED WITH CAPS E26, E26/50x39,E26/51x39 & E26d (NON-SKIRTED) (7006-29-3)
T5-285 E26d GAUGE FOR CAPS ON FINISHED LAMPS FOR TESTING PROTECTION AGAINST ACCIDENTAL CONTACT (7006-29A-2)
T5-286 E26d GAUGE WITH REFERENCE DIAMETER OF 23 mm FOR CAPS (7006-29B-2)
T5-287 E26d GAUGE WITH REFERENCE DIAMETER OF 13,2 mm FOR CAPS (7006-29C-2)
T5-288 E26d GAUGE WITH REFERENCE DIAMETER OF 10,4 mm FOR CAPS ON FINISHED LAMPS (7006-29D-1)
T5-289 G5 DOUBLE ENDED GAUGE III. FOR A COMBINED PAIR OF LAMPHOLDERS FOR TESTING CONTACT-MAKING (7006-47B-4, IEC 60400)
T5-290 G5 DOUBLE ENDED GAUGE IV. FOR A COMBINED PAIR OF LAMPHOLDERS FOR TESTING CONTACT-MAKING (7006-47B-4, IEC 60400)
T5-291 G5 DOUBLE ENDED GAUGE V. FOR A COMBINED PAIR OF LAMPHOLDERS FOR TESTING CONTACT-MAKING (7006-47B-4, IEC 60400)
T5-292 E26 "GO" GAUGE FOR LAMPHOLDERS (7006-25B-2)
T5-293 E26 & E26d "NOT GO" GAUGE FOR LAMPHOLDERS (7006-26A-2)
T5-294 E26d GAUGE FOR CHECKING THE RADIAL POSITION OF THE INTERMEDIATE CONTACT OF LAMPHOLDER(7006-29E-1)
T5-295 E26d GAUGE A FOR TESTING THE RELATIVE POSITION OF THE CONTACT IN LAMPHOLDERS (7006-29F-2)
T5-296 E26d GAUGE B FOR TESTING THE RELATIVE POSITION OF THE CONTACT IN LAMPHOLDERS (7006-29F-2)
T5-297 E26d GAUGE FOR TESTING CONTACT-MAKING IN LAMPHOLDERS (7006-29G-3)
T5-298 E26d GAUGE FOR TESTING CONTACT-MAKING IN METAL-SHELL PAPER-LINED LAMPHOLDERS (7006-29H-3)
T5-299 E26d PLUG GAUGE FOR TESTING PROTECTION AGAINST ACCIDENTAL CONTACT IN LAMPHOLDERS (7006-29J-1)
T5-300 E26d "GO" PLUG GAUGE FOR LAMPHOLDERS (7006-29K-1)
T5-301 GAUGE 947 A1
T5-302 GAUGE 947 A2
T5-303 GAUGE 947 A3
T5-304 GAUGE 947 A4
T5-305 GAUGE 947 A5
T5-306 GAUGE 947 B6
T5-307 GAUGE 947 B7
T5-308 GAUGE 947 B8
T5-309 GAUGE 947 B9
T5-31 DUMMY FUSE LINK SET (4 pcs.) SIZE 00
T5-310 GAUGE 947 B10
T5-311 GAUGE 947 B11
T5-312 GAUGE 947 B12
T5-313 GAUGE 947 B13
T5-314 GAUGE 947 B14
T5-315 GAUGE 947 B15
T5-316 GAUGE 947 B16
T5-317 SET OF GAUGES 947
T5-32 DUMMY FUSE LINK SET (4 pcs.) SIZE 0
T5-320 VESSEL FOR TESTING HOB ELEMENTS AND HOTPLATES DIA. 110 (IEC 60335-2-6, Fig. 101, IEC 60335-2-9, Fig. 103)
T5-321 VESSEL FOR TESTING HOB ELEMENTS AND HOTPLATES DIA. 145 (IEC 60335-2-6, Fig. 101, IEC 60335-2-9, Fig. 103)
T5-322 VESSEL FOR TESTING HOB ELEMENTS AND HOTPLATES DIA. 180 (IEC 60335-2-6, Fig. 101, IEC 60335-2-9, Fig. 103)
T5-323 VESSEL FOR TESTING HOB ELEMENTS AND HOTPLATES DIA. 220 (IEC 60335-2-6, Fig. 101, IEC 60335-2-9, Fig. 103)
T5-324 VESSEL FOR TESTING HOB ELEMENTS AND HOTPLATES DIA. 300 (IEC 60335-2-6, Fig. 101, IEC 60335-2-9, Fig. 103)
T5-328 GLASS VESSEL FOR MICROWAVE OVEN
T5-32X VESSEL FOR TESTING HOB ELEMENTS AND HOTPLATES
T5-33 DUMMY FUSE LINK SET (4 pcs.) SIZE 1
T5-330 LOADING WEIGHT 0.5 KG FOR REFRIGERATORS
T5-331 LOADING WEIGHT 2.3 KG FOR REFRIGERATORS
T5-335 ECCENTRIC WEIGHT FOR OVENS (IEC 60335-2-6, Fig. 103)
T5-336 TEST ROD dia. 6, l 150
T5-337 SHORT TEST PROBE DIA. 12
T5-338 TEST ROD DIA. 40 WITH HEMISPHERICAL END
T5-339 TEST HEMISPHE DIA. 100
T5-34 DUMMY FUSE LINK SET (4 pcs.) SIZE 2
T5-340 G5 PLUG GAUGE FOR LAMPHOLDERS FOR TESTING PROTECTION AGAINST ACCIDENTAL CONTACT (7006-47A-2)
T5-341 G23 PLUG GAUGE "A" FOR CHECKING MAXIMUM INSERTION FORCE AND MAXIMUM WITHDRAW FORCE IN LAMPHOLDERS (7006-69A-1)
T5-342 G23 and GX23 PLUG GAUGE "B" FOR CHECKING MAXIMUM INSERTION FORCE IN LAMPHOLDER (7006-69B-2)
T5-343 G23 PLUG GAUGE "C" FOR CHECKING MINIMUM RETENTION FORCE IN LAMPHOLDERS
T5-344 G13 DOUBLE ENDED GAUGE III. FOR A COMBINED PAIR OF LAMPHOLDERS FOR TESTING CONTACT-MAKING (7006-60B-4, IEC 60400)
T5-345 G13 DOUBLE ENDED GAUGE IV. FOR A COMBINED PAIR OF LAMPHOLDERS FOR TESTING CONTACT-MAKING (7006-60B-4, IEC 60400)
T5-346 G13 DOUBLE ENDED GAUGE V. FOR A COMBINED PAIR OF LAMPHOLDERS FOR TESTING CONTACT-MAKING (7006-60B-4, IEC 60400)
T5-347 G5 TEST CAP (IEC 60400, Fig. 4)
T5-348 G13 TEST CAP (IEC 60400, Fig. 4)
T5-35 DUMMY FUSE LINK SET (4 pcs.) SIZE 3
T5-350 GO GAUGE FOR CONNECTORS TO STANDARD SHEET C1 (IEC 60320-1, FIG. 2)
T5-351 GO GAUGE FOR CONNECTORS TO STANDARD SHEET C5 (IEC 60320-1, FIG. 4)
T5-352 GO GAUGE FOR CONNECTORS TO STANDARD SHEET C7 (IEC 60320-1, FIG. 5)
T5-353 GO GAUGE FOR SIDE-ENTRY CONNECTORS TO STANDARD SHEET C7 (IEC 60320-1, FIG. 5 bis)
T5-354 NOT-GO GAUGE FOR CONNECTORS TO STANDARD SHEET C1 (IEC 60320-1, FIG. 6)
T5-355 NOT-GO GAUGE FOR CONNECTORS TO STANDARD SHEETS C1, C5 AND C7 (IEC 60320-1, FIG. 7)
T5-356 NOT-GO GAUGE FOR CONNECTORS TO STANDARD SHEETS C1 AND C7 (IEC 60320-1, FIG. 8)
T5-357 NOT-GO GAUGE FOR APPLIANCE INLETS TO STANDARD SHEETS C8, C8A AND C8B (IEC 60320-1, F. 9)
T5-358 GO GAUGE FOR CONNECTORS TO STANDARD SHEET C9 (IEC 60320-1, FIG. 9A)
T5-359 NOT-GO GAUGE FOR CONNECTORS TO STANDARD SHEET C9 (IEC 60320-1, FIG. 9B)
T5-36 DUMMY FUSE LINK SET (4 pcs.) SIZE 4
T5-360 GO GAUGE FOR APPLIANCE INLETS TO STANDARD SHEET C10 (IEC 60320-1, FIG. 9C)
T5-361 GO GAUGE FOR CONNECTORS TO STANDARD SHEET C17 (IEC 60320-1, FIG. 9K)
T5-362 GO GAUGE FOR CONNECTORS TO STANDARD SHEET C19 (IEC 60320-1, FIG. 9L)
T5-363 GO GAUGE FOR APPLIANCE INLETS TO STANDARD SHEETS C20 AND C24 (IEC 60320-1, FIG. 9M)
T5-364 GO GAUGE FOR CONNECTORS TO STANDARD SHEET C21 (IEC 60320-1, FIG. 9N)
T5-365 GO GAUGE FOR APPLIANCE INLETS TO STANDARD SHEET C22 (IEC 60320-1, FIG. 9P)
T5-366 GO GAUGE FOR CONNECTORS TO STANDARD SHEET C23 (IEC 60320-1, FIG. 9Q)
T5-37 DUMMY FUSE LINK SET (4 pcs.) SIZE 4a
T5-370 VESSEL FOR TESTING INDUCTION HOTPLATES DIA. 110 (IEC 60335-2-6, Fig. 102, IEC 60335-2-9, Fig. 104)
T5-371 VESSEL FOR TESTING INDUCTION HOTPLATES DIA. 145 (IEC 60335-2-6, Fig. 102, IEC 60335-2-9, Fig. 104)
T5-372 VESSEL FOR TESTING INDUCTION HOTPLATES DIA. 180 (IEC 60335-2-6, Fig. 102, IEC 60335-2-9, Fig. 104)
T5-373 VESSEL FOR TESTING INDUCTION HOTPLATES DIA. 220 (IEC 60335-2-6, Fig. 102, IEC 60335-2-9, Fig. 104)
T5-374 VESSEL FOR TESTING INDUCTION HOTPLATES DIA. 300 (IEC 60335-2-6, Fig. 102, IEC 60335-2-9, Fig. 104)
T5-375 VESSEL FOR TESTING INDUCTION HOTPLATES DIA. 210 (IEC 60335-2-6, Fig. 102, IEC 60335-2-9, Fig. 104)
T5-376 VESSEL FOR TESTING INDUCTION HOTPLATES DIA. 270 (IEC 60335-2-6, Fig. 102, IEC 60335-2-9, Fig. 104)
T5-37X VESSELS FOR TESTING INDUCTION HOTPLATES
T5-380 "GO" AND "NOT GO" GAUGE FOR STARTERS (IEC 155 fig. 6)
T5-381 "NOT GO" GAUGE FOR STARTERS (IEC 155 fig. 7)
T5-382 "GO" GAUGE FOR STARTERS (IEC 155 fig. 8)
T5-383 "GO" GAUGE FOR STARTERS FOR CLASS II LUMINAIRES (IEC 155 fig. B.2)
T5-400 "GO" GAUGE FOR E27 CAPS ON FINISHED LAMPS (7006-27B-1)
T5-401 "GO" GAUGE FOR E14 CAPS ON FINISHED LAMPS (7006-27F-1)
T5-402 "NOT GO" GAUGE FOR E27 CAPS ON FINISHED LAMPS (7006-28A-1)
T5-403 "NOT GO" GAUGE FOR E14 CAPS ON FINISHED LAMPS (7006-28B-1)
T5-404 "GO" GAUGE FOR DIMENSION "S1" OF E27 CAPS ON FINISHED LAMPS (7006-27C-1)
T5-405 "GO" GAUGE FOR DIMENSION "S1" OF E14 CAPS ON FINISHED LAMPS (7006-27G-1)
T5-406 GAUGE FOR FINISHED LAMPS FITTED WITH E27 CAPS FOR TESTING CONTACT MAKING (7006-50-1)
T5-43 RIGID TEST FINGER WITH FORCE METER 100 N
T5-430 E27 HOLDER FOR TORQUE TEST ON LAMPS WITH SCREW CAPS (IEC 60968 F. 3)
T5-431 E26 HOLDER FOR TORQUE TEST ON LAMPS WITH SCREW CAPS (IEC 60968 F. 3, 60432-1 F. C.2)
T5-432 B22 HOLDER FOR TORQUE TEST ON LAMPS WITH BAYONET CAPS (IEC 60968 F. 3, 60432-1 F. C.1)
T5-433 E14 HOLDER FOR TORQUE TEST ON LAMPS WITH SCREW CAPS (IEC 60968 F. 3, 60432-1 F. C.2)
T5-438 "GO" GAUGE FOR CAPS E26, E26/50x39, E26/51x39 & E26d (7006-27D-3)
T5-440 B22d GAUGE FOR CHECKING CONTACT POSITION AND CONTACT FORCE IN BAYONET LAMPHOLDERS (7006-15A-2)
T5-441 BY22d GAUGE FOR CHECKING CONTACT POSITION AND CONTACT FORCE IN BAYONET LAMPHOLDERS (7006-15A-2)
T5-442 B15d GAUGE FOR CHECKING CONTACT POSITION AND CONTACT FORCE IN BAYONET LAMPHOLDERS (7006-15B-1)
T5-443 B15d GAUGE FOR THE SLOTS IN LAMHOLDERS (7006-13-5)
T5-444 B22d, B22d-3 & BY22d GAUGE FOR THE SLOTS IN LAMHOLDERS (7006-13-5)
T5-445 B15d SUPPLEMENTARY "GO" GAUGE FOR LAMPHOLDERS (7006-12C-2)
T5-446 B15 "NOT GO"/RETENTION GAUGE FOR LAMPHOLDERS (7006-12D-2)
T5-447 B22d SUPPLEMENTARY "GO" GAUGE FOR LAMPHOLDERS (7006-12A-2)
T5-448 BY22d SUPPLEMENTARY "GO" GAUGE FOR LAMPHOLDERS (7006-12A-2)
T5-449 B22 "NOT GO"/RETENTION GAUGE FOR LAMPHOLDERS (7006-12B-2)
T5-451 28x2 "GO" AND "NOT GO" FOR BARREL THREAD OF SHADE HOLDER RINGS (60399-IEC-03-1, 60238)
T5-452 40x2,5 "GO" AND "NOT GO" FOR BARREL THREAD OF SHADE HOLDER RINGS (60399-IEC-03-1, 60238)
T5-453 35x2,74 "GO" AND "NOT GO" FOR BARREL THREAD OF SHADE HOLDER RINGS (60399-IEC-03-1, 60238)
T5-454 45x2,74 "GO" AND "NOT GO" FOR BARREL THREAD OF SHADE HOLDER RINGS (60399-IEC-03-1, 60238)
T5-455 20,8x2 "GO" AND "NOT GO" FOR BARREL THREAD OF SHADE HOLDER RINGS (60399-IEC-03-1, 60238)
T5-457 PLUG GAUGE FOR LAMPHOLDERS BY22d (Sh. 7006-17B-1)
T5-458 GAUGE FOR CHECKING CONTACT POSITION AND CONTACT FORCE IN BAYONET LAMPHOLDERS B22d-3 (90/135deg) (Sh. 7006-15-7)
T5-459 20,8x2 "GO" GAUGE FOR BARREL THREAD OF LAMPHOLDERS WITH SHADE HOLDER RING (60399-IEC-04-1, 60238)
T5-46 TEST PIN DIA. 1 x 20 mm (Fig. 1, BS 1363-2)
T5-480 20,8x2 "NOT GO" GE FOR BARREL THREAD OF LAMPHOLDERS WITH SHADE HOLDER RING (60399-IEC-04-1, 60238)
T5-481 G24, GX24 & GY24 "NOT GO" GAUGE "F" FOR CHECKING NON-INTERCHANGEABILITY OF CAPS IN LAMPHOLDERS (7006-78F-6 Fig. 1)
T5-482 G24, GX24 & GY24 "NOT GO" GAUGE "F" FOR CHECKING NON-INTERCHANGEABILITY OF CAPS IN LAMPHOLDERS (7006-78F-6 Fig. 2)
T5-483 G24, GX24 & GY24 "NOT GO" GAUGE "F" FOR CHECKING NON-INTERCHANGEABILITY OF CAPS IN LAMPHOLDERS (7006-78F-6 Fig. 3)
T5-484 G24, GX24 & GY24 "NOT GO" GAUGE "F" FOR CHECKING NON-INTERCHANGEABILITY OF CAPS IN LAMPHOLDERS (7006-78F-6 Fig. 4)
T5-485 G24, GX24 "NOT GO" GAUGE "F" FOR CHECKING NON-INTERCHANGEABILITY OF CAPS IN LAMPHOLDERS (7006-78F-6 Fig. 5)
T5-486 G24, GX24 "NOT GO" GAUGE "F" FOR CHECKING NON-INTERCHANGEABILITY OF CAPS IN LAMPHOLDERS (7006-78F-6 Fig. 6)
T5-487 G24, GX24 "NOT GO" GAUGE "F" FOR CHECKING NON-INTERCHANGEABILITY OF CAPS IN LAMPHOLDERS (7006-78F-6 Fig. 7)
T5-488 GO AND NOT GO GAUGE FOR CAPS G24, GX24 & GY24 (Sh. 7006-78-5, Fig. 1)
T5-489 GO AND NOT GO GAUGE FOR CAPS G24, GX24 & GY24 (Sh. 7006-78-5, Fig. 2)
T5-49 LONG TEST PIN DIA.3-DIA.4, l=50
T5-490 GO AND NOT GO GAUGE FOR CAPS G24, GX24 & GY24 (Sh. 7006-78-5, Fig. 3)
T5-491 GO AND NOT GO GAUGE FOR CAPS G24, GX24 & GY24 (Sh. 7006-78-5, Fig. 4)
T5-492 GO AND NOT GO GAUGE FOR CAPS G24q-5 & GX24q-5 (Sh. 7006-78-5, Fig. 1)
T5-493 G5.3 "GO" GAUGE FOR LAMHOLDERS (7006-73A-1)
T5-494 GX5.3 "GO" GAUGE FOR LAMPHOLDERS (7006-73D-3)
T5-495 GY5.3 "GO" GAUGE FOR LAMPHOLDERS (7006-73E-3)
T5-496 GY5.3 SINGLE PIN GAUGE FOR CHECKING MINIMUM RETENTION FORCE OF CONTACTS IN LAMPHOLDERS (7006-73J-1)
T5-497 GZ10 "GO" AND "NOT GO" GAUGE FOR BASES (7006-120-1)
T5-498 G5 DOUBLE ENDED GAUGE V. FOR A COMBINED PAIR OF LAMPHOLDERS FOR TESTING CONTACT-MAKING (7006-47B-4) (Change E=2.44 D=4.4 mm)
T5-499 G13 DOUBLE ENDED GAUGE V. FOR A COMBINED PAIR OF LAMPHOLDERS FOR TESTING CONTACT-MAKING (7006-60B-4) (Change E=2.44 D = 12.35 mm)
T5-543 R7s "GO" GAUGE FOR A COMBINED PAIR OF LAMPHOLDERS Z=254mm (7006-62-4)
T5-544 R7s "GO" GAUGE FOR A COMBINED PAIR OF LAMPHOLDERS Z=333mm (7006-62-4)
T5-545 SINGLE PIN GAUGE "E" FOR CHECKING MINIMUM RETENTION FORCE OF CONTACTS IN LAMPHOLDERS G5, 2G(X)7, 2G10, 2G11, G13, G(X)23, G(X)(Y)24, G(X)(Y)32 (7006-69E-5)
T5-546 G5 "GO" AND "NO GO" GAUGE FOR UNMOUNTED BI-BIN CAP (7006-46-3)
T5-547 G13 "GO" AND "NO GO" GAUGE FOR UNMOUNTED BI-BIN CAP (7006-44-4)
T5-548 G6.35, GX6.35 & GZ6.35 "GO" AND "NOT GO" GAUGE FOR BASES (7006-61-5)
T5-549 GY6.35 "GO" AND "NOT GO" GAUGE FOR BASES (7006-61-5)
T5-55 TEST PIN DIA. 2 x 100 mm
T5-550 G4 GAUGE A - "GO" AND "NOT GO" GAUGE FOR PINS OF BI-PIN LAMP BASES (7006-72-1)
T5-551 G4 GAUGE B - "GO" GAUGE FOR BASE OF BI-PIN LAMP BASES (7006-72-1)
T5-552 G5.3 GAUGE FOR BI-PIN CAP ON FINISHED LAMPS (7006-73-1)
T5-553 G5.3 "GO" GAUGE FOR BASE (7006-126-1)
T5-554 GU10 "GO" AND "NOT GO" GAUGE FOR BASES (7006-121-1) isti kot T5-534
T5-555 GR8&GR10q GO GAUGE FOR CHECKING THE PINS OF CAPS ON FINISHED LAMPS (7006-68E-1)
T5-556 GR8&GR10q GO AND NOT GO GAUGE FOR CHECKING THE PINS OF CAPS (7006-68F-1)
T5-557 GR10q GO GAUGE FOR UNMOUNTED CAPS (7006-77-2)
T5-558 GR10q GAUGE FOR CAPS TO ENSURE ENTRY OF MAXIMUM LAMPHOLDERS AND TO CHECK PIN SPACING AND LENGTH (7006-77A-2)
T5-559 GX10q GO GAUGE FOR CAPS ON FINISHED LAMPS (7006-84-2)
T5-56 TEST HOOK (IEC 60065, Figure 4)
T5-560 GX10q NOT GO GAUGE "A" FOR CAPS ON FINISHED LAMPS (7006-84A-1)
T5-561 GX10q NOT GO GAUGE "B" FOR CAPS ON FINISHED LAMPS (7006-84B-1)
T5-562 GY10q GO GAUGE FOR CAPS ON FINISHED LAMPS (7006-85-2)
T5-563 GY10q NOT GO GAUGE "A" FOR CAPS ON FINISHED LAMPS (7006-85A-1)
T5-564 G13 HEATED TEST CAP A FOR TESTING OF RESISTANCE TO HEAT OF LAMPHOLDERS WITH T MARKING (IEC 60400 Fig. 9)
T5-565 G13 HEATED TEST CAP B FOR TESTING OF RESISTANCE TO HEAT OF LAMPHOLDERS WITH T MARKING (IEC 60400 Fig. 9)
T5-579 E14 HOLDER FOR TORSION TEST ON LAMPS WITH SCREW CAPS (IEC 60968, Fig. 2)
T5-58 TEST PIN DIA. 1 x 100 mm
T5-580 E27 HOLDER FOR TORSION TEST ON LAMPS WITH SCREW CAPS (IEC 60968, Fig. 2)
T5-581 B15 HOLDER FOR TORQUE TEST ON LAMPS WITH BAYONET CAPS (IEC 60968, Fig. 3)
T5-582 B22 HOLDER FOR TORQUE TEST ON LAMPS WITH BAYONET CAPS (IEC 60968, Fig. 3)
T5-583 GX10q-1 GO GAUGE FOR KEYS OF CAPS ON FINISHED LAMPS (7006-84E-1)
T5-584 GX10q-2 GO GAUGE FOR KEYS OF CAPS ON FINISHED LAMPS (7006-84E-1)
T5-585 GX10q-3 GO GAUGE FOR KEYS OF CAPS ON FINISHED LAMPS (7006-84E-1)
T5-586 GX10q-4 GO GAUGE FOR KEYS OF CAPS ON FINISHED LAMPS (7006-84E-1)
T5-587 GX10q-5 GO GAUGE FOR KEYS OF CAPS ON FINISHED LAMPS (7006-84E-1)
T5-588 GX10q-6 GO GAUGE FOR KEYS OF CAPS ON FINISHED LAMPS (7006-84E-1)
T5-589 GY10q-1 GO GAUGE FOR KEYS OF CAPS ON FINISHED LAMPS (7006-85D-1)
T5-59 TEST PROBE DIA. 12 (IEC 60950, Fig. 2C)
T5-590 GY10q-2 GO GAUGE FOR KEYS OF CAPS ON FINISHED LAMPS (7006-85D-1)
T5-591 GY10q-3 GO GAUGE FOR KEYS OF CAPS ON FINISHED LAMPS (7006-85D-1)
T5-592 GY10q-4 GO GAUGE FOR KEYS OF CAPS ON FINISHED LAMPS (7006-85D-1)
T5-593 GY10q-5 GO GAUGE FOR KEYS OF CAPS ON FINISHED LAMPS (7006-85D-1)
T5-594 GY10q-6 GO GAUGE FOR KEYS OF CAPS ON FINISHED LAMPS (7006-85D-1)
T5-595 GAUGE FOR CHECKING SIDE CONTACTS (F. 43 - DIN VDE 0620-1)
T5-596 "GO" GAUGE A FOR THE CONTACTS OF LAMPHOLDERS G10q, GX10q, GY10q & GZ10q (7006-79A-2)
T5-597 "GO" GAUGE B FOR THE CONTACTS OF LAMPHOLDERS G10q, GX10q, GY10q & GZ10q (7006-79A-2)
T5-598 CONTACT MAKING GAUGE FOR LAMPHOLDERS G10q, GX10q, GY10q (7006-79B-1)
T5-60 STRAIGHT PROBE DIA. 38 (UL 153, Fig. 1)
T5-600 APPLIANCE INLET GAUGE FOR MAX. WITHDRAWAL FORCE CHECKING - C2 (IEC 60320-1, Cl. 16)
T5-601 APPLIANCE INLET GAUGE FOR MAX. WITHDRAWAL FORCE CHECKING - C6 (IEC 60320-1, Cl. 16)
T5-602 APPLIANCE INLET GAUGE FOR MAX. WITHDRAWAL FORCE CHECKING - C8 (IEC 60320-1, Cl. 16)
T5-603 APPLIANCE INLET GAUGE FOR MAX. WITHDRAWAL FORCE CHECKING - C10 (IEC 60320-1, Cl. 16)
T5-604 APPLIANCE INLET GAUGE FOR MAX. WITHDRAWAL FORCE CHECKING - C18 (IEC 60320-1, Cl. 16)
T5-605 APPLIANCE INLET GAUGE FOR MAX. WITHDRAWAL FORCE CHECKING - C20 (IEC 60320-1, Cl. 16)
T5-606 APPLIANCE INLET GAUGE FOR MAX. WITHDRAWAL FORCE CHECKING - C22 (IEC 60320-1, Cl. 16)
T5-607 APPLIANCE INLET GAUGE FOR MAX. WITHDRAWAL FORCE CHECKING - C24 (IEC 60320-1, Cl. 16)
T5-61 TEST SPHERE DIA. 50, 0,51 kg
T5-611 GAUGE FOR THE VERIFICATION OF THE MINIMUM WITHDRAWAL FORCE 1.5 N - C1, C5 and C7 (IEC 60320-1, Cl. 16)
T5-612 GAUGE FOR THE VERIFICATION OF THE MINIMUM WITHDRAWAL FORCE 1.5 N - C5 (LONG) (IEC 60320-1, Cl. 16)
T5-613 GAUGE FOR THE VERIFICATION OF THE MINIMUM WITHDRAWAL FORCE 1.5 N - C9, C13, C15, C15A, AND C17 (IEC 60320-1, Cl. 16)
T5-614 GAUGE FOR THE VERIFICATION OF THE MINIMUM WITHDRAWAL FORCE 1.5 N - C13, C15 AND C15A (LONG) (IEC 60320-1, Cl. 16)
T5-615 GAUGE FOR THE VERIFICATION OF THE MINIMUM WITHDRAWAL FORCE 2 N - C19, C21 AND C23 (IEC 60320-1, Cl. 16)
T5-616 GAUGE FOR THE VERIFICATION OF THE MINIMUM WITHDRAWAL FORCE 2 N - C19, AND C21 (LONG) (IEC 60320-1, Cl. 16)
T5-62 RIGID SPHERE DIA. 12.5
T5-620 GO GAUGE FOR APPLIANCE OUTLETS TO STANDARD SHEET F (IEC 320-2-2, FIG. 101)
T5-621 GO GAUGE FOR APPLIANCE OUTLETS TO STANDARD SHEET H (IEC 320-2-2, FIG. 102)
T5-622 GO GAUGE FOR APPLIANCE OUTLETS TO STANDARD SHEET J (IEC 320-2-2, FIG. 103)
T5-623 GO GAUGE FOR APPLIANCE OUTLETS TO STANDARD SHEET L (IEC 320-2-2, FIG. 104)
T5-63 TEST SPHERE 0,5 kg (IEC 60950-1)
T5-643 GO GAUGE FOR CAPS 2G13-41 (Sh. 7006-33-2)
T5-644 GO GAUGE FOR CAPS 2G13-56 (Sh. 7006-33-2)
T5-645 GO GAUGE FOR CAPS 2G13-92 (Sh. 7006-33-2)
T5-646 GO GAUGE FOR CAPS 2G13-152 (Sh. 7006-33-2)
T5-647 GO AND NOT GO GAUGE FOR RECESSED DOUBLE COONTACT CAP R17d ON FINISHED LAMPS (Sh. 7006-57-3)
T5-650 GAUGE FOR THE VERIFICATION OF MAXIMUM WITHDRAWAL FORCE (F. 101, IEC 60884-2-4)
T5-651 GAUGE FOR THE VERIFICATION OF MINIMUM WITHDRAWAL FORCE (F. 102, IEC 60884-2-4)
T5-652 GAUGE C1 FOR SIZE OF ENTRY HOLES FOR PLUG PINS DIA. 5,8 MM (F. 1, CEE 7, VDE0620-1 Gauge 1)
T5-653 GAUGE C1 FOR SIZE OF ENTRY HOLES FOR PLUG PINS DIA. 6 MM (F. 1, CEE 7, VDE0620-1 Gauge 1)
T5-654 GAUGE C2A FOR MINIMUM OPENING OF CONTACT TUBES, 400 G (F. 2 CEE 7)
T5-655 GAUGE C2B FOR MINIMUM OPENING OF CONTACT TUBES, 400 G (F. 2 CEE 7)
T5-656 GAUGE C3 FOR ACCEPTANCE OF TWO-POLE PLUGS (F. 3 CEE 7, VDE0620-1 Gauge 3)
T5-657 GAUGE C4 FOR ACCEPTANCE OF TWO-POLE PLUGS WITH SIDE EARTHING-CONTACTS (F. 4 CEE 7, VDE0620-1 Gauge 4)
T5-658 GAUGE C6A FOR FIXING HOLES OR SLOTS (F. 6 CEE 7)
T5-659 GAUGE C6B FOR FIXING HOLES OR SLOTS (F. 6 CEE 7)
T5-66 RIGID TEST SPHERE WITH GUARD DIA. 50
T5-660 GAUGE C7A FOR DISTANCE TO POINT OF FIRST CONTACT (F. 7 CEE 7, VDE0620-1 Gauge 5)
T5-661 GAUGE C7B FOR DISTANCE TO POINT OF FIRST CONTACT (F. 7 CEE 7, VDE0620-1 Gauge 5)
T5-662 GAUGE C7C FOR DISTANCE TO POINT OF FIRST CONTACT (F. 7 CEE 7, VDE0620-1 Gauge 5)
T5-663 GAUGE C7D FOR DISTANCE TO POINT OF FIRST CONTACT (F. 7 CEE 7, VDE0620-1 Gauge 5)
   
T5-664 GAUGE C8 FOR WIRING CHANNEL (F. 8 CEE 7)
T5-665 "GO" GAUGE C9A FOR PIN DIAMETER (Fig. 9 CEE 7; EN 50075, Fig. 1, VDE0620-1 Gauge 6)
T5-666 "NOT GO" GAUGE C9A FOR PIN DIAMETER (Fig. 9 CEE 7; EN 50075, Fig. 1, VDE0620-1 Gauge 6)
T5-667 "GO" GAUGE C9B FOR PIN DIAMETER (F. 9 CEE 7, VDE0620-1 Gauge 6)
T5-668 "NOT GO" GAUGE C9B FOR PIN DIAMETER (F. 9 CEE 7, VDE0620-1 Gauge 6)
T5-669 GAUGE C10A FOR PIN SPACING (F. 10 CEE 7, VDE0620-1 Gauge 7)
T5-67 DYNAMOMETER 20 N
T5-670 GAUGE C10B FOR PIN SPACING (F. 10 CEE 7, VDE0620-1 Gauge 7)
T5-671 GAUGE C11 FOR MAXIMUM OPENING OF CONTACT TUBES (F. 11 CEE 7, VDE0620-1 Gauge 8)
T5-672 GAUGE C12 FOR INTERCHANGEABILITY (F. 12 CEE 7, VDE0620-1 Gauge 9)
T5-673 GAUGE FOR INTERCHANGEABILITY (F. 13 CEE 7; EN 50075, Fig. 2)
T5-674 GAUGE FOR DIMENSIONS OF MOUNTING BOXES (F. 14 CEE 7)
T5-675 GAUGE FOR NON-INTERCHANGEABILITY WITH TWO-POLE PLUGS WITH EARTHING CONTACTS (F. 15 CEE 7)
T5-676 GAUGE FOR NON-ACCEPTANCE OF TWO-POLE PLUGS WITHOUT EARTHING CONTACT (F. 16 CEE 7, VDE0620-1 Gauge 11)
T5-677 GAUGE FOR CHECKING IMPOSSIBILITY OF SINGLE-POLE INSERTION OF PLUGS (F. 18 CEE 7, VDE0620-1 Gauge 10)
T5-678 GAUGE A FOR CHECKING IMPOSSIBILITY OF SINGLE-POLE INSERTION OF PLUGS INTO SOCKET OUTLETS. 250 G (F. 19 CEE 7 )
T5-679 GAUGE B FOR CHECKING IMPOSSIBILITY OF SINGLE-POLE INSERTION OF PLUGS INTO SOCKET OUTLETS. 250 G (F. 19 CEE 7, VDE0620-1 GAUGE 12)
T5-68 DYNAMOMETER 50N
T5-680 GAUGE A FOR CHECKING IMPOSSIBILITY OF SINGLE-POLE INSERTION OF PLUGS INTO SOCKET OUTLETS. 1000 G (F. 19 CEE 7 )
T5-681 GAUGE B FOR CHECKING IMPOSSIBILITY OF SINGLE-POLE INSERTION OF PLUGS INTO SOCKET OUTLETS. 1000 G (F. 19 CEE 7, VDE0620-1 GAUGE 12)
T5-684 CONTACT TEST GAUGE (F. 12, BS 1363-2)
T5-686 TURNING MOMENT GAUGE (F. 15, BS 1363-2)
T5-687 WITHDRAWAL PULL GAUGE A FOR EFFECTIVENESS OF CONTACT (F. 16, BS 1363-2)
T5-688 WITHDRAWAL PULL GAUGE B FOR EFFECTIVENESS OF CONTACT (F. 16, BS 1363-2)
T5-689 TEST PLUG FOR TEMPERATURE RISE (F. 30, BS 1363-2)
T5-69 DYNAMOMETER 100 N
T5-690 TEST PLUG FOR BREAKING CAPACITY TEST (F. 1-15, ANSI WD 6)
T5-691 TEST PLUG FOR BREAKING CAPACITY TEST (F. 5-15, ANSI WD 6)
T5-692 TEST PLUG FOR BREAKING CAPACITY TEST (F. 1-20, ANSI WD 6)
T5-693 TEST PLUG FOR BREAKING CAPACITY TEST (F. 5-20, ANSI WD 6)
T5-694 TEST FLANGED INLET FOR BREAKING CAPACITY TEST (FOR 1-15, ANSI WD 6)
T5-695 TEST FLANGED INLET FOR BREAKING CAPACITY TEST (FOR 5-15, ANSI WD 6)
T5-696 TEST FLANGED INLET FOR BREAKING CAPACITY TEST (FOR 1-20, ANSI WD 6)
T5-697 TEST FLANGED INLET FOR BREAKING CAPACITY TEST (FOR 5-20, ANSI WD 6)
T5-698 TEST PLUG R1 FOR BREAKING CAPACITY TEST (DIN 49 441)
T5-699 TEST PLUG FOR BREAKING CAPACITY TEST (F. 4, BS 1363-1)
T5-70 PROBE FOR CONDUIT ENTRIES DIA. 16 mm
T5-700 TEST CAP B22d (IEC 61184, Fig. 6 )
T5-701 TEST CAP B22d FOR INSULATION RESISTANCE NAD HIGH-VOLTAGE TESTS (IEC 61184, Fig. 11)
T5-702 GAUGE FOR HOLES FOR BACKPLATE LAMPHOLDERS SCREWES (IEC 61184, Fig. 3)
T5-703 TEST HOLDER FOR TORSION TEST FOR G5 CAPPED LAMPS (IEC 61195, Fig. A.1)
T5-704 TEST HOLDER FOR TORSION TEST FOR G13 CAPPED LAMPS (IEC 61195, Fig. A.1)
T5-705 G5 DOUBLE ENDED "GO" GAUGE I. FOR A COMBINED PAIR OF LAMPHOLDERS (7006-47C-3)
T5-706 G5 DOUBLE ENDED "GO" GAUGE II. FOR A COMBINED PAIR OF LAMPHOLDERS (7006-47C-3)
T5-707 G13 DOUBLE ENDED "GO" GAUGE I. FOR A COMBINED PAIR OF LAMPHOLDERS (7006-60C-3)
T5-708 G13 DOUBLE ENDED "GO" GAUGE II. FOR A COMBINED PAIR OF LAMPHOLDERS (7006-60C-3)
T5-71 PROBE FOR CONDUIT ENTRIES DIA. 20 mm
T5-710 "GO" GAUGE FOR LAMPHOLDERS G4 (Sh. 7006-72A-3)
T5-711 GAUGE FOR CHECKING MINIMUM RETENTION FORCE IN LAMPHOLDERS G4 (Sh. 7006-72B-2)
T5-712 GO GAUGE FOR G9 LAMPHOLDERS (Sh. 7006-129B-1)
T5-713 GO GAUGE FOR CHECKING MAXIMUM INSERTION AND WITHDRAWAL TORQUE IN LAMPHOLDERS GU10 (Sh. 7006-121A-2)
T5-717 GAUGE "A" FOR CHECKING LAMPHOLDERS G12 (Sh. 7006-80A-2)
T5-718 GAUGE "B" FOR CHECKING LAMPHOLDERS G12 (Sh. 7006-80B-2)
T5-719 GAUGE "C" FOR CHECKING LAMPHOLDERS G12 (Sh. 7006-80C-2)
T5-72 GAUGE FOR CHECKING NON-ACCESSIBILITY OF LIVE PARTS, THROUGH SHUTTERS, AND FO LIVE PARTS OF SOCKET-OUTLETS WITH INCREASED PROTECTION; DIA. 1 x 80 mm (IEC 60884-1, F. 10)
T5-720 STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 50 mm (IEC 60335-2-6)
T5-721 STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 60 mm (IEC 60335-2-6)
T5-722 STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 70 mm (IEC 60335-2-6)
T5-723 STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 80 mm (IEC 60335-2-6)
T5-724 STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 90 mm (IEC 60335-2-6)
T5-725 STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 100 mm (IEC 60335-2-6)
T5-726 STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 110 mm (IEC 60335-2-6)
T5-727 STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 120 mm (IEC 60335-2-6)
T5-728 STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 130 mm (IEC 60335-2-6)
T5-729 STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 140 mm (IEC 60335-2-6)
T5-73 GAUGE FOR CHECKING NON-ACCESSIBILITY OF LIVE PARTS, THROUGH SHUTTERS; 1 x 3 x 80 mm (IEC 60884-1, F. 9)
T5-730 STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 150 mm (IEC 60335-2-6)
T5-731 STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 160 mm (IEC 60335-2-6)
T5-732 STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 170 mm (IEC 60335-2-6)
T5-733 STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 180 mm (IEC 60335-2-6)
T5-734 STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 190 mm (IEC 60335-2-6)
T5-735 STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 200 mm (IEC 60335-2-6)
T5-736 STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 210 mm (IEC 60335-2-6)
T5-737 STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 220 mm (IEC 60335-2-6)
T5-738 STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 230 mm (IEC 60335-2-6)
T5-739 STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 240 mm (IEC 60335-2-6)
T5-740 STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 250 mm (IEC 60335-2-6)
T5-741 STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 260 mm (IEC 60335-2-6)
T5-742 STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 270 mm (IEC 60335-2-6)
T5-743 STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 280 mm (IEC 60335-2-6)
T5-744 STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 290 mm (IEC 60335-2-6)
T5-745 STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 300 mm (IEC 60335-2-6)
T5-746 IRON BAR 100 x 20 x 2 mm (IEC 60335-2-6)
T5-747 "GO" GAUGE FOR CHECKING MAXIMUM INSERTION TORQUE IN LAMPHOLDERS GZ10 (Sh. 7006-120A-2)
T5-748 "GO" GAUGE FOR CHECKING MAXIMUM WITHDRAWAL TORQUE IN LAMPHOLDERS GZ10 (Sh. 7006-120A-2)
T5-749 GAUGE B FOR CHECKING IMPOSSIBILITY OF SINGLE-POLE INSERTION OF PLUGS (VDE0620-1 Gauge 10)
T5-75 JOINTED TEST FINGER (IEC 61032, F. 2, TEST PROBE B)
T5-750 GO PLUG GAUGE A FOR STARTHOLDERS (IEC 60400, F. 11)
T5-751 GO PLUG GAUGE B FOR STARTHOLDERS (IEC 60400, F. 11)
T5-752 PLUG GAUGE FOR STARTHOLDERS FOR TESTING CONTACT MAKING & RETENTION (IEC 60400, F. 12)
T5-753 SPECIAL PLUG GAUGE FOR STARTHOLDERS FOR TESTING CONTACT MAKING (IEC 60400, F. 13)
T5-754 TEST CAP FOR THE TEST OF CLAUSE 13 FOR LAMPHOLDERS G5 (IEC 60400, F. 14)
T5-755 TEST CAP FOR THE TEST OF CLAUSE 13 FOR LAMPHOLDERS G13 (IEC 60400, F. 15)
T5-756 TEST CAP FOR THE TEST OF CLAUSE 13 FOR LAMPHOLDERS 2G13-41 (IEC 60400, F. 16)
T5-757 TEST CAP FOR THE TEST OF CLAUSE 13 FOR LAMPHOLDERS 2G13-56 (IEC 60400, F. 16)
T5-758 TEST CAP FOR THE TEST OF CLAUSE 13 FOR LAMPHOLDERS 2G13-92 (IEC 60400, F. 16)
T5-759 TEST CAP FOR THE TEST OF CLAUSE 13 FOR LAMPHOLDERS 2G13-152 (IEC 60400, F. 16)
T5-76 TEST NAIL (IEC 60335-1, F. 7)
T5-760 TEST CAP FOR THE TEST OF CLAUSE 13 FOR LAMPHOLDERS G20 (IEC 60400, F. 17)
T5-761 TEST CAP FOR THE TEST OF CLAUSE 13 FOR LAMPHOLDERS Fa6 (IEC 60400, F. 18)
T5-762 TEST CAP FOR THE TEST OF CLAUSE 13 FOR LAMPHOLDERS G10q (IEC 60400, F. 19)
T5-763 TEST CAP FOR THE TEST OF CLAUSE 13 FOR LAMPHOLDERS Fa8 (IEC 60400, F. 20)
T5-765 TEST CAP FOR THE TEST OF CLAUSE 13 FOR LAMPHOLDERS R17d (IEC 60400, F. 22)
T5-766 TEST CAP FOR THE TEST OF CLAUSE 13 FOR LAMPHOLDERS 2G11 (IEC 60400, F. 23)
T5-767 TEST CAP FOR THE TEST OF CLAUSE 13 FOR LAMPHOLDERS G23 AND GX23 (IEC 60400, F. 24)
T5-768 TEST CAP FOR THE TEST OF CLAUSE 13 FOR LAMPHOLDERS GR10q (IEC 60400, F. 26)
T5-769 TEST CAP FOR THE TEST OF CLAUSE 13 FOR LAMPHOLDERS G24 AND GY24 (IEC 60400, F. 28)
T5-77 SMALL TEST FINGER - TEST PROBE 18
T5-770 TEST CAP FOR THE TEST OF CLAUSE 13 FOR LAMPHOLDERS G32 AND GY32 (IEC 60400, F. 29)
T5-771 TEST CAP FOR THE TEST OF 17.1 FOR LAMPHOLDERS G23 (IEC 60400, F. 30)
T5-772 TEST CAP FOR THE TEST OF 17.1 FOR LAMPHOLDERS GR8 (IEC 60400, F. 31)
T5-773 TEST CAP FOR THE TEST OF 17.1 FOR LAMPHOLDERS GR10q (IEC 60400, F. 32)
T5-774 TEST CAP FOR THE TEST OF 17.1 FOR LAMPHOLDERS GY10q (IEC 60400, F. 34)
T5-775 TEST CAP FOR THE TEST OF 17.1 FOR LAMPHOLDERS 2G11 (IEC 60400, F. 35)
T5-776 TEST CAP FOR THE TEST OF 17.1 FOR LAMPHOLDERS GX23 (IEC 60400, F. 36)
T5-777 TEST CAP FOR THE TEST OF 17.1 FOR LAMPHOLDERS G24 AND GY24 (IEC 60400, F. 37)
T5-778 TEST CAP FOR THE TEST OF 17.1 FOR LAMPHOLDERS G32, GX32 AND GY32 (IEC 60400, F. 38)
T5-779 TEST CAP FOR THE TEST OF CLAUSE 13 (IEC 60400, F. 21)
T5-78 GAUGE FOR VERIFICATION OF GROOVES, HOLES AND REVERSE TAPERS DIA. 2.5, l 100
T5-780 GAUGE FOR DEPTH OF NO-CONTACT TESTS FOR 10 A AND 15 A SOCKET-OUTLETS (AS3112, FIG. 3.1)
T5-781 GAUGE FOR DEPTH OF NO-CONTACT TESTS FOR 20 A SOCKET-OUTLETS (AS3112, FIG. 3.1)
T5-782 DEVICE FOR CHECKING THE RESISTANCE TO LATERAL STRAIN (AS3112, FIG. 3.6)
T5-783 10 A THREE-PIN TEST PLUG FOR CHECKING THREE-PIN FLAT-PIN 250 V MAX SOCKET-OUTLETS AGAINST THE STANDARD TEST FINGER (AS3112, FIG. C1)
T5-784 15 A THREE-PIN TEST PLUG FOR CHECKING THREE-PIN FLAT-PIN 250 V MAX SOCKET-OUTLETS AGAINST THE STANDARD TEST FINGER (AS3112, FIG. C1)
T5-785 20 A THREE-PIN TEST PLUG FOR CHECKING THREE-PIN FLAT-PIN 250 V MAX SOCKET-OUTLETS AGAINST THE STANDARD TEST FINGER (AS3112, FIG. C1)
T5-786 10 A THREE-PIN TEST PLUG FOR CHECKING THREE-PIN FLAT-PIN 250 V MAX SOCKET-OUTLETS AGAINST INCORRECT INSERTION OF PLUGS (AS3112, FIG. D1)
T5-787 15 A THREE-PIN TEST PLUG FOR CHECKING THREE-PIN FLAT-PIN 250 V MAX SOCKET-OUTLETS AGAINST INCORRECT INSERTION OF PLUGS (AS3112, FIG. D1)
T5-788 20 A THREE-PIN TEST PLUG FOR CHECKING THREE-PIN FLAT-PIN 250 V MAX SOCKET-OUTLETS AGAINST INCORRECT INSERTION OF PLUGS (AS3112, FIG. D1)
T5-789 GX10q-1 NOT GO GAUGE FOR CAPS ON FINISHED LAMPS (7006-84F-1)
T5-79 LONG TEST PIN DIA. 4, l=50 (TEST PROBE 12)
T5-790 GX10q-2 NOT GO GAUGE FOR CAPS ON FINISHED LAMPS (7006-84F-1)
T5-791 GX10q-3 NOT GO GAUGE FOR CAPS ON FINISHED LAMPS (7006-84F-1)
T5-792 GX10q-4 NOT GO GAUGE FOR CAPS ON FINISHED LAMPS (7006-84F-1)
T5-793 GX10q-5 NOT GO GAUGE FOR CAPS ON FINISHED LAMPS (7006-84F-1)
T5-794 GX10q-6 NOT GO GAUGE FOR CAPS ON FINISHED LAMPS (7006-84F-1)
T5-795 GY10q-1 NOT GO GAUGE FOR CAPS ON FINISHED LAMPS (7006-85E-1)
T5-796 GY10q-2 NOT GO GAUGE FOR CAPS ON FINISHED LAMPS (7006-85E-1)
T5-797 GY10q-3 NOT GO GAUGE FOR CAPS ON FINISHED LAMPS (7006-85E-1)
T5-798 GY10q-4 NOT GO GAUGE FOR CAPS ON FINISHED LAMPS (7006-85E-1)
T5-799 GY10q-5 NOT GO GAUGE FOR CAPS ON FINISHED LAMPS (7006-85E-1)
T5-80 TEST PLUG FOR ANTENNA COAXIAL SOCKETS
T5-800 GY10q-6 NOT GO GAUGE FOR CAPS ON FINISHED LAMPS (7006-85E-1)
T5-801 GO GAUGES (MIN. AND MAX) FOR SOCKET OUTLET (F. 11, BS 1363-1, 1363-2)
T5-802 CONTACT TEST GAUGE (F. 12, BS 1363-2)
T5-803 GAUGE FOR PLUG PINS (F. 5, BS 1363-1)
T5-804 NON-CONTACT TEST GAUGE (F. 14, BS 1363-2)
T5-805 GAUGE 2A FOR MINIMUM OPENING OF CONTACT TUBES, 200 g (VDE0620-1 Gauge 2)
T5-806 GAUGE 2B FOR MINIMUM OPENING OF CONTACT TUBES, 200 g (VDE0620-1 Gauge 2)
T5-807 GAUGE 2C FOR MINIMUM OPENING OF CONTACT TUBES, 300 g (VDE0620-1 Gauge 2)
T5-808 GAUGE 1 FOR SIZE OF ENTRY HOLES FOR PLUG PINS DIA. 5 mm (VDE0620-1 Gauge 1)
T5-809 GAUGE 16b FOR TESTING MAX. WITHDRAWAL FORCE OF 3-PHASE 16A PLUG (VDE 0620-1 Fig.16b)
T5-81 E14 GAUGE FOR MINIMUM DISTANCE FROM OUTER END OF SCREW SHELL TO CENTRAL CONT.
T5-810 GAUGE 16c FOR TESTING MAX. WITHDRAWAL FORCE OF 3-PHASE 25A PLUG (VDE 0620-1 Fig.16c)
T5-811 GO GAUGE FOR G9 BASE (Sh. 7006-129-1)
T5-812 NOT GO GAUGE FOR G9 BASE (Sh. 7006-129A-1)
T5-813 B15 HOLDER FOR TORQUE TEST ON LAMPS WITH BAYONET CAPS (IEC 60968 F. 3, 60432-1 F. C.1)
T5-814 E27 HOLDER FOR TORQUE TEST ON LAMPS WITH SCREW CAPS (IEC 60432-1 F. C.2)
T5-815 E12 HOLDER FOR TORQUE TEST ON LAMPS WITH SCREW CAPS (IEC 60432-1 F. C.2)
T5-816 E17 HOLDER FOR TORQUE TEST ON LAMPS WITH SCREW CAPS (IEC 60432-1 F. C.2)
T5-817 CALIBRE C1 POUR 16A (NF C 61-314)
T5-818 CALIBRE C1 POUR 6A (NF C 61-314)
T5-819 CALIBRE C2 POUR 6A (NF C 61-314)
T5-82 E27 GAUGE FOR MINIMUM DISTANCE FROM OUTER END OF SCREW SHELL TO CENTRAL CONT.
T5-820 CALIBRE C2 POUR 16A (NF C 61-314)
T5-821 CALIBRE C3A POUR 6A (NF C 61-314)
T5-822 CALIBRE C3B POUR 6A (NF C 61-314)
T5-823 CALIBRE C3C POUR 6A (NF C 61-314)
T5-824 CALIBRE C3D POUR 16A (NF C 61-314)
T5-825 CALIBRE C3E POUR 16A (NF C 61-314)
T5-826 CALIBRE C3F POUR 16A (NF C 61-314)
T5-827 CALIBRE C4A POUR 6A, MASSE 300 g (NF C 61-314)
T5-828 CALIBRE C4A POUR 6A, MASSE 150 g (NF C 61-314)
T5-829 CALIBRE C4B POUR 16A, MASSE 400 g (NF C 61-314)
T5-83 E40 GAUGE FOR MINIMUM DISTANCE FROM OUTER END OF SCREW SHELL TO CENTRAL CONT.
T5-830 CALIBRE C4B POUR 16A, MASSE 200 g (NF C 61-314)
T5-831 CALIBRE C4C POUR 16A, MASSE 400 g (NF C 61-314)
T5-832 CALIBRE C4C POUR 16A, MASSE 200 g (NF C 61-314)
T5-833 CALIBRE C5 POUR 6A (NF C 61-314)
T5-834 CALIBRE C5 POUR 16A (NF C 61-314)
T5-835 CALIBRE C6 POUR 16A (NF C 61-314)
T5-836 CALIBRE C7A POUR 6A (NF C 61-314)
T5-837 CALIBRE C7A POUR 16A (NF C 61-314)
T5-838 CALIBRE C7B POUR 6A (NF C 61-314)
T5-839 CALIBRE C7B POUR 16A (NF C 61-314)
T5-84 E14 "NOT GO" PLUG GAUGE FOR SCREW THREADS OF LAMPHOLDERS (7006-26-4)
T5-840 "GO" GAUGE G FOR CHECKING KEY SLOTS IN LAMPHOLDERS G24,GX24 & GY24 (Sh.7006-78G-6, Fig. 1)
T5-841 "GO" GAUGE G FOR CHECKING KEY SLOTS IN LAMPHOLDERS G24,GX24 & GY24 (Sh.7006-78G-6, Fig. 2)
T5-842 "GO" GAUGE G FOR CHECKING KEY SLOTS IN LAMPHOLDERS G24,GX24 & GY24 (Sh.7006-78G-6, Fig. 3)
T5-843 "GO" GAUGE G FOR CHECKING KEY SLOTS IN LAMPHOLDERS G24,GX24 & GY24 (Sh.7006-78G-6, Fig. 4)
T5-844 "GO" GAUGE G FOR CHECKING KEY SLOTS IN LAMPHOLDERS G24,GX24 & GY24 (Sh.7006-78G-6, Fig. 5)
T5-845 "GO" GAUGE G FOR CHECKING KEY SLOTS IN LAMPHOLDERS G24,GX24 & GY24 (Sh.7006-78G-6, Fig. 6)
T5-846 "GO" GAUGE G FOR CHECKING KEY SLOTS IN LAMPHOLDERS G24,GX24 & GY24 (Sh.7006-78G-6, Fig. 7)
T5-847 "NOT GO" GAUGE FOR E26, E26/50x39, E26/51x39 & E26d CAPS ON FINISHED LAMPS (Sh. 7006-29L-4)
T5-848 "GO" AND "NOT GO" GAUGE FOR G23 BI-PIN CAPS ON FINISHED LAMPS (Sh. 7006-69-2)
T5-849 "GO" GAUGE FOR BI-PIN CAPS AND BASES G38 ON FINISHED LAMPS (Sh. 7006-76-1)
T5-85 E27 "NOT GO" PLUG GAUGE FOR SCREW THREADS OF LAMPHOLDERS (7006-26-4)
T5-850 "GO" AND "NOT GO" GAUGE FOR PINS OF BI-PIN CAPS AND BASES G38 ON FINISHED LAMPS (Sh. 7006-76A-1)
T5-851 "GO" GAUGE FOR E17 LAMPHOLDERS (Sh. 7006-25H-1)
T5-852 "NOT GO" GAUGE FOR E17 LAMPHOLDERS (Sh. 7006-26C-1)
T5-853 GAUGE FOR TESTING CONTACT MAKING IN E17 LAMPHOLDERS (Sh. 7006-26E-1)
T5-854 GAUGE FOR TESTING CONTACT MAKING IN E26 LAMPHOLDERS (Sh. 7006-25J-1)
T5-855 GAUGE FOR TESTING UNACCEPTABLE CONTACT MAKING IN E26d LAMPHOLDERS (Sh. 7006-29M-1)
T5-856 GAUGE FOR CHECKING MINIMUM RETENTION FORCE IN G9 LAMPHOLDERS (Sh. 7006-129C-1)
T5-857 GAUGE FOR CHECKING CONTACT-MAKING IN G9 LAMPHOLDERS (Sh. 7006-129D-1)
T5-858 GAUGE FOR CHECKING THE MINIMUM WITHDRAWAL TORQUE IN GU10 & GZ10 LAMPHOLDERS (Sh. 7006-120B-1)
T5-859 GAUGES FOR TESTING INSERTION AND CONTACT-MAKING IN LAMPHOLDERS 2G13-41 (Sh. 7006-33A-2)
T5-86 E40 "NOT GO" PLUG GAUGE FOR SCREW THREADS OF LAMPHOLDERS (7006-26-4)
T5-860 GAUGES FOR TESTING INSERTION AND CONTACT-MAKING IN LAMPHOLDERS 2G13-56 (Sh. 7006-33A-2)
T5-861 GAUGES FOR TESTING INSERTION AND CONTACT-MAKING IN LAMPHOLDERS 2G13-92 (Sh. 7006-33A-2)
T5-862 GAUGES FOR TESTING INSERTION AND CONTACT-MAKING IN LAMPHOLDERS 2G13-152 (Sh. 7006-33A-2)
T5-863 GAUGE FOR LAMPHOLDERS 2G13 FOR TESTING CONTACT-MAKING (Sh. 7006-33B-1)
T5-864 "GO" GAUGE FOR LAMPHOLDERS 2GX13 (Sh. 7006-125-1)
T5-865 GAUGE FOR TESTING CONTACT-MAKING IN 2GX13 LAMPHOLDERS (Sh. 7006-125C-1)
T5-866 GAUGE FOR CHECKING THE MINIMUM RETENTION FORCE OF 2GX13 LAMPHOLDERS (Sh. 7006-125D-1)
T5-867 GAUGE "A" FOR LAMPHOLDERS S14d (Sh. 7006-112D-1)
T5-868 GAUGE "B1" FOR LAMPHOLDERS S14d (Sh. 7006-112E-1)
T5-869 GAUGE "B2" FOR LAMPHOLDERS S14d (Sh. 7006-112E-1)
T5-87 E14 "GO" PLUG GAUGE FOR SCREW THREADS (7006-25-7)
T5-870 GAUGE "A" FOR LAMPHOLDERS S14s (Sh. 7006-112A-1)
T5-871 GAUGE "B" FOR LAMPHOLDERS S14s (Sh. 7006-112B-1)
T5-872 GAUGE "C" FOR LAMPHOLDERS S14s (Sh. 7006-112C-1)
T5-873 CONTACT GAUGE FOR CHECKING THE EARTHING CONTACT OF 2,5 A CONNECTORS (IEC 60320-1, F. 27)
T5-874 NO CONTACT GAUGE FOR CHECKING THE EARTHING CONTACT OF 2,5 A CONNECTORS (IEC 60320-1, F. 27)
T5-875 CONTACT GAUGE FOR CHECKING THE EARTHING CONTACT OF 16 A CONNECTORS (IEC 60320-1, F. 27)
T5-876 NO CONTACT GAUGE FOR CHECKING THE EARTHING CONTACT OF 16 A CONNECTORS (IEC 60320-1, F. 27)
T5-877 TEST PLUG WITH SOLID PINS FOR NORMAL OPERATION TEST (Cl. 18, BS 1363-2)
T5-878 SET OF SOLID PINS FOR T5-877 (3 pcs. Cl. 18, BS 1363-2)
T5-879 E10, EP10, EY10 "NOT GO" PLUG GAUGE FOR SCREW THREADS OF LAMPHOLDERS (7006-26-4)
T5-88 E27 "GO" GAUGE FOR LAMPHOLDERS (7006-25A-2)
T5-880 E39 "NOT GO" PLUG GAUGE FOR SCREW THREADS OF LAMPHOLDERS (7006-26-4)
T5-881 ACCEPTANCE GAUGE FOR B22d CAPS INTENDED FOR AUTOMATIC WIRE THREADING (7006-3-1)
T5-882 GAUGE BY22d FOR TESTING THE INSERTION OF CAPS IN LAMPHOLDERS (7006-4A-2)
T5-883 "GO" GAUGE FOR CAP B22d-3 (25x26) ON FINISHED LAMPS (7006-19-2)
T5-89 E40 "GO" PLUG GAUGE FOR SCREW THREADS (7006-25-7)
T5-90 E10 "GO" PLUG GAUGE FOR SCREW THREADS (7006-25-7)
T5-91 E10 "NOT GO" PLUG GAUGE FOR SCREW THREADS OF LAMPHOLDERS (7006-26-4)
T5-92 E40 GAUGE FOR TESTING PROTECTION AGAINST BULB-NECK DAMAGE AND FOR TESTING CONTACT-MAKING IN LAMPHOLDERS (7006-23-3)
T5-95 E40 PLUG GAUGE FOR LAMPHOLDERS FOR TESTING PROTECTION AGAINST ACCIDENTAL CONTACT (7006-24-3)
T5-XX GAUGES AND TEST PROBES
T6-01 VARIABLE RATIO TRANSFORMER (270 V, 30 A)
T6-04 3-PHASE STABILIZED AC POWER SUPPLY UNIT 3 x 0-450V, 40A
T6-07 3-PHASE AC POWER SUPPLY UNIT 3 x 0-550V, 45A
T6-12 4 STEP DOUBLE PROGRAMMABLE TIMER
T6-16 PROGRAMMABLE OFF SWITCHING COUNTER
T6-17 OFF SWITCHING COUNTER WITH TIMER
T6-19 MOTOR CONTROLLER 200
T6-20 PNEUMATIC DRIVE UNIT
T6-21 SWITCH ACTUATOR CONTROL UNIT
T6-21A SWITCH ACTUATOR (LONGITUDINAL MOVEMENT)
T6-21B SWITCH ACTUATOR (LONGITUDINAL AND CIRCULAR MOVEMENT)
T6-22 3-PHASE AC POWER SUPPY UNIT 3 x 0-520V, 20A (23 kVA)
T6-46 COORDINATE HOLDER
T6-50 RESISTANCE BATTERY 15 kW
T6-60 AIR CORE INDUCTOR 100 mH, 25 A
T6-64 AIR CORE INDUCTOR Imax 63 A, cosj max. 0.6
T6-65 IRON CORE INDUCTOR Imax 40 A, cosj max. 0.3
T6-70 TUNGSTEN LAMP LOAD (BATTERY WITH 60x200W LAMPS)
T6-71 BENCH FOR MECHANICAL TESTS
T6-90 TEST SYSTEM FOR SWITCHES
T6-91 TEST SYSTEM FOR SWITCHES (3 PHASE 3 x 34 kW, max. 440V, 91A, IEC 60669-1)
T6-92 POWER SUPPLY UNIT WITH NON INDUCTIVE RESISTANCE BATTERY (0-280 V, 15 A, 3,9 kVA, BS 1363-2 Cl. 17,18)
T6-93 POWER SUPPLY UNIT WITH INDUCTIVE AND RESISTIVE LOAD (0-275 V, 125 A, 0,3 cos ?)
T6-94 POWER SUPPLY UNIT WITH INDUCTIVE AND RESISTIVE LOAD (0-275 V, 50 A, 0,3 cos ?)
TC150WB TEMPERATURE CHAMBER WITH WATER BATH FOR DETERMINATION OF FROST RESISTANCE OF NATURAL STONE 150l, (600 x 500 x 400 mm), -20°C to + 100 °C (EN 12371)
TK265C TEMPERATURE CHAMBER 265 L, T= -40..50 deg C
TK600C TEMPERATURE CHAMBER 612 L, T= -40..50 deg C
TK600H TEMPERATURE CHAMBER 612 L, T= +35..+300 deg C