Home | About us | Products | Links | Contact us | Support |  

All Products

CAT. NO.	DESCRIPTION	IMAGE
2094MI	MULTITESTER
DV-20	WATER DISTILLER (20l/h)
DV-8	WATER DISTILLER (8l/h)
KK-3500	CLIMATIC CHAMBER 3552 L (1200x1600x1850 mm), 10°C to + 70 °C, RH 30 to 95 %
KK1000	CLIMATIC CHAMBER 1000 L, 5°C to + 95 °C, RH 15 to 95 %
KK1000 CHL	CLIMATIC CHAMBER 1000 L (1000x1000x1000 mm), -30°C to + 100 °C, RH 10 to 95 %
KK1000 CHLT	CLIMATIC CHAMBER 1000 L (1000x1000x1000 mm), -75°C to + 180 °C, RH 10 to 98 %
KK1000CH	CLIMATIC CHAMBER 1000 L (1000x1000x1000 mm), -45 °C to 120 °C, RH 15 to 97 %
KK105	CLIMATIC CHAMBER 105 L, 5°C to + 95 °C, RH 15 to 95 %
KK1440CH	CLIMATIC CHAMBER 1440 L (1000x1200x1200 mm), 10°C to + 180 °C, RH 10 to 95 %
KK190	CLIMATIC CHAMBER 190 L, 5°C to + 95 °C, RH 15 to 95 %
KK190LT	CLIMATIC CHAMBER 190 L, EXTENDED TEMP RANGE, -75°C to + 180 °C, RH 15 to 95 %
KK2000CH	CLIMATIC CHAMBER 2000 L (1050 x 1200 x 1600 mm), -40°C to + 150 °C, RH 10 to 98 %
KK265	CLIMATIC CHAMBER 252 L, 5°C to + 95 °C, RH 15 to 95 %
KK4075	CLIMATIC CHAMBER 4075 L, 5°C to + 95 °C, RH 15 to 95 %
KK500	CLIMATIC CHAMBER 495 L, 5°C to + 95 °C, RH 15 to 95 %
KK600L	TEMPERATURE AND HUMIDITY CHAMBER 612 L, T= -40..90 deg C, % RH 10..95%
KKXX	CLIMATIC CHAMBERS
OB-7/2	CALIBRATION BATH 7L (TCW +8°C to 250°C +/- 0,02 °C, ID100 mm x 230 mm)
OB-7/2H	CALIBRATION BATH 7L (TCW -40°C to 130°C +/- 0,02 °C, ID100 mm x 230 mm)
SP105	HEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 105 L
SP105C	HEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 105 L
SP1200CK	TEMPERATURE CHAMBER 1200 l , 0°C to 300 °C
SP120E	HEATING CHAMBER WITH FORCED CONVECTION - EASY Ta+5 to 300 deg.C 120 L
SP1300C	HEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 1288 L
SP160	HEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 163 L
SP160C	HEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 163 L
SP190	HEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 190 L
SP190C	HEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 190 L
SP210	HEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 210 L
SP210C	HEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 210 L
SP240E	HEATING CHAMBER WITH FORCED CONVECTION - EASY Ta+5 to 300 deg.C 240 L
SP250	HEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 250 L
SP250C	HEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 250 L
SP25E	HEATING CHAMBER WITH FORCED CONVECTION - EASY Ta+5 to 300 deg.C 25 L
SP265	HEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 264 L
SP265C	HEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 264 L
SP440	HEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 440 L
SP440C	HEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 440 L
SP45	HEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 44 L
SP45C	HEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 44 L
SP55E	HEATING CHAMBER WITH FORCED CONVECTION - EASY Ta+5 to 300 deg.C 55 L
SP910C	HEATING CHAMBER WITH FORCED CONVECTION Ta+5 to 300 deg.C 910 L
SPXXE	HEATING CHAMBERS WITH FORCED CONVECTION - EASY
T1-02	HEATING DEVICE
T1-04	HEATING DEVICE CONTROLLER
T1-11	FUME CUPBOARD (PROTECTIVE CABINET, TEST CHAMBER) 850 l
T1-12	FUME CUPBOARD (PROTECTIVE CABINET) 1000 x 1000 x 1500 mm
T1-13	DUST CHAMBER 3 m3
T1-14	FUME CUPBOARD 0,5 m3
T1-15	DUST CHAMBER 800x800x900 mm
T1-16	DUST CHAMBER 2000x1000x1000 mm
T1-17	DUST CHAMBER 1000x1000x1000 mm
T1-18	DUST CHAMBER 1400x700x700 mm
T1-19	DRIP BOX 700 x 700 mm
T1-20	DRIP BOX 500 x 500 mm
T1-21	DRIP BOX 500 x 1000 mm
T1-23	WATER SUPPLY UNIT FOR DRIP BOX
T1-25	TURNTABLE FOR DRIP BOX
T1-26	TUBE FOR SPRAY APPARATUS, R 200, ?60, ?90°
T1-27	TUBE FOR SPRAY APPARATUS, R 400, ?60, ?90°
T1-28	TUBE FOR SPRAY APPARATUS R 600 ?60,?90°
T1-29	TUBE FOR SPRAY APPARATUS, R 800, ?60, ?90°
T1-30	TUBE FOR SPRAY APPARATUS, R 1000, ?60, ?90°
T1-32	MOTOR DRIVE FOR SPRAY APPARATUS
T1-35	TELESCOPE SUPPORT 270x180
T1-36	SPRAY NOZZLE
T1-37	WALL ELECTROLIFT FOR DRIP BOX
T1-40	WALL CARRIER FOR DRIP BOX (700x700) (h=4000mm)
T1-41	WATER JET HOSE NOZZLE DIA. 6,3 mm
T1-42	WATER JET HOSE NOZZLE DIA. 12,5 mm
T1-43	SPLASH NOZZLE (IEC 60335-2-64, 60335-2-58, Fig. 101)
T1-45	JET TEST SET
T1-51	DUST CHAMBER WxDxH 700X1100x600 mm
T1-55	DRAUGHT - PROOF ENCLOSURE FOR LUMINARIES 2x2x2 m (IEC 60598-1, Annex D)
T1-56	DRAUGHT - PROOF ENCLOSURE FOR LUMINARIES 2,5x1,8x3 m (IEC 60598-1, Annex D)
T1-59	TEST ENCLOSURE FOR MEASUREMENT OF SMOKE DENSITY OF CABLES 3x3x3m (IEC 61034-1)
T1-60	APPARATUS FOR HEATING TEST WITH 4 - 10 A FLUSH-MOUNTED APPLIANCE INLETS C16 (INSUL. SHROUD)
T1-61	APP. FOR HEATING TEST WITH 4 - 10 A FLUSH-MOUNTED APPLIANCE INLETS C16A (INSUL. SHROUD)
T1-62	APP. FOR HEATING TEST WITH 4 - 16 A SURFACE-MOUNTED APPLIANCE INLETS C22 (METAL SHROUD)
T1-63	POWER REGULATOR FOR T1-65
T1-65	WATER EVAPORATION APPARATUS FOR REFRIGERATORS (IEC 60335-2-24, Fig. BB.1)
T1-66	WATER SPILLAGE APPARATUS FOR REFRIGERATORS (IEC 60335-2-24, Fig. 101)
T1-71	TUBE FOR SPRAY APPARATUS, R 1200, ?60, ?90°
T1-75C	PROGRAMMABLE WALK IN CHAMBER 3x3x3m t - 40 °C to + 90 °C , 15% to 95% RH
T1-76	PLYWOOD TEST CABINET 500 × 500 × 500 mm (IEC 60400 Cl. 17.1)
T1-77	CHAMBER FOR WATER TESTS IPX1-4 WITH DRIP BOX (500x500mm), OSCILLATING TUBE (R200) AND TURNTABLE
T1-77A	WATER DISTILLER WITH PUMP FOR CLEANING THE T1-77 AFTER TESTING
T1-77B	SYSTEM FOR WATER RECYCLING OF T1-77
T1-78	HEATING ENCLOSURE FOR THERMALLY PROTECTED BALLASTS (IEC 61347-1)
T1-79	TEST CHAMBER FOR MEASUREMENT OF SMOKE DENSITY OF CABLES BURNING UNDER DEFINED CONDITIONS 3x3x3m (IEC 61034-1, 60331-11)
T2-01	TUMBLING BARREL h=350mm
T2-02	TUMBLING BARREL h=500 mm
T2-04	TUMBLING BARREL
T2-04A	BARREL OF T2-04
T2-06	PENDULUM IMPACT TEST APPARATUS - MECHANISM
T2-07	MOUNTING DEVICE FOR IMPACT TEST m 10kg, 175 x 175
T2-08	MOUNTING DEVICE FOR IMPACT TEST DIA. 175
T2-10	BRAKE FOR T2-11 WITH FASTENING DEVICE
T2-100	DEVICE FOR CHECKING THE FIXATION OF PLUG PINS (VDE 0620-1 F. 31)
T2-101	DEVICE FOR CHECKING THE FIXATION OF PLUG PINS (VDE 0620-1 F. 31)
T2-102	DEVICE FOR CHECKING THE SIDE EARTHING CONTACTS (VDE 0620-1 F. 43)
T2-103	G13 MOUNTING JIG FOR THE TESTING OF LAMPHOLDERS (IEC 60400, Fig. 1)
T2-104	TOOL FOR VERIFICATION OF MAXIMUM WITHDRAWAL FORCE (NEN 1020)
T2-105	TOOL FOR VERIFICATION OF MINIMUM WITHDRAWAL FORCE (NEN 1020)
T2-11	TORSION APPARATUS 4 Nm
T2-12	BENDING APPARATUS FOR LAMPHOLDERS (IEC 60238 Fig. 12)
T2-13	DEVICE FOR WITHDRAWAL FORCE MEASURING
T2-14	APPARATUS FOR VERIFICATION OF MAXIMUM WITHDRAWAL FORCE
T2-15	PRESSURE APPARATUS (IEC 60238, Fig. 9)
T2-16	APPARATUS FOR PRESSURE TEST ON SHROUDS (IEC 60320-1, F. 20)
T2-17	APPARATUS FOR PULLING TEST (IEC 60320-1, F. 19)
T2-18	APP. FOR TESTING THE CORD RETENTION
T2-19	IMPACT APP. FOR GRIPPING LUGS
T2-20	APPARATUS FOR TESTING CORD RETENTION (IEC 60884-1, Fig. 20)
T2-21	IMPACT WEIGHT APPARATUS
T2-22	INTERMEDIATE PE FOR T2-21 FOR LOW TEMP. TEST
T2-23	INTERMEDIATE PE FOR T2-21 FOR PIN INSULATING SLEEVES
T2-25	SLIDING WEIGHT 100 g FOR T2-21
T2-28	SLIDING WEIGHT 250 g FOR T2-21
T2-34	SLIDING WEIGHT 1000 g FOR T2-21
T2-40	AXIAL PULL TEST APPARATUS (IEC 60127-2, Fig. 7)
T2-41	TEST FUSE BASE I max.10A (IEC 60127-2, Fig. 1)
T2-42	TEST FUSE BASE I > 10A (IEC 60127-2, Fig. 2)
T2-43	TEST FUSE BASE FOR BREAKING CAPACITY (IEC 60127-2, Fig. 3)
T2-44	MECHANICAL SHOCK TEST APPARATUS (IEC 60898-1)
T2-45	BUMP TEST APPARATUS 1000 x 600 mm, IEC 60065
T2-46	PENDULUM IMPACT - TEST APPARATUS-POLYAMIDE HAMMER 150g
T2-47	PENDULUM IMPACT-TEST APPARATUS-STEEL HAMMER 150g
T2-48	PENDULUM IMPACT-TEST APPARATUS-STEEL HAMMER 250g
T2-49	PENDULUM IMPACT-TEST APPARATUS-STEEL HAMMER 500g
T2-50	PENDULUM IMPACT-TEST APPARATUS-STEEL HAMMER 1500g
T2-51	PENDULUM IMPACT-TEST APPARATUS-STEEL HAMMER 5000g
T2-52	MOUNTING BLOCK FOR FLUSH TYPE EQUIPMENT
T2-53	TRIGGER FOR HAMMERS T2-49, T2-50 and T2-51
T2-54	TORSION APPARATUS 20 Nm
T2-58	TORSION APPARATUS 0.5 Nm (IEC 60335-1, 60950-1)
T2-59	ARRANGEMENT FOR MECHANICAL STRENGTH TEST ON MULTIPLE PORTABLE SOCKET-OUTLETS (IEC 60884-1, BS 1363-2)
T2-60	PENDULUM IMPACT-TEST APPARATUS-POLYAMIDE HAMMER 250g
T2-63	TUMBLING BARREL h=500 mm (IEC60068-2-32)
T2-64	ARRANGEMENT FOR COMPRESSION TEST OF 24.5 (150 N, 300 N) (IEC 60884-1, FIG. 8, Cl. 10.1)
T2-65	APPARATUS FOR TESTING SCREW-TYPE TERMINALS (IEC 60884-1, Fig. 11)
T2-66	APPARATUS FOR TESTING DURABILITY OF MARKINGS ON RATING LABELS
T2-69	ARRANGEMENT FOR CHECKING DAMAGE TO CONDUCTORS (IEC 60884-1, Fig. 11)
T2-70	INCLINED PLANE 1000 x 1000 mm
T2-71	TILTED SUPPORT FOR IPX2 TEST 500 x 500
T2-72	APPARATUS FOR WINDING A FLEXIBLE PIPE
T2-73	APPARATUS FOR CHECKING SECURITY OF LAMPHOLDER CONTACTS
T2-74	CORD ANCHORAGE TORQUE DEVICE
T2-76	DEVICE FOR MEASURING THE CONTACT PRESSURE OF EARTHING CONTACTS OF 10/16A 250 V TWO-POLE SOCKET-OUTLETS WITH SIDE EARTHING-CONTACTS (F. 23, CEE 7, VDE 0620-1 F. 14)
T2-77	PLUG PIN DEFLECTION TEST APPARATUS FOR RESILIENT PLUGS (BS 1363-1, Fig. 8, Cl. 12.12)
T2-78	APPARATUS FOR MECHANICAL STRENGTH TEST ON RESILIENT COVERS WITH HARDWOOD BLOCK (BS 1363-1, Cl. 9, Fig. 2a, 2b)
T2-79	APPARATUS FOR TESTS ON PLUG PINS (BS 1363-1, Fig. 32, Cl. 12.9.4)
T2-80	APPARATUS FOR TORSION TEST ON PINS (BS 1363-1, Fig. 33, Cl. 12.9.6)
T2-81	APPARATUS FOR PULL TEST ON BS PLUGS (100N, W/MOUNTING PLATE) (BS 1363-1, Fig. 7, Cl. 12.11.1)
T2-82	TOOL FOR VERIFICATION OF MAXIMUM WITHDRAWAL FORCE (SSA 444, IEC 60884-1)
T2-83	TOOL FOR VERIFICATION OF MAXIMUM WITHDRAWAL FORCE (EN 50075, IEC 60884-1)
T2-84	TOOL FOR VERIFICATION OF MAXIMUM WITHDRAWAL FORCE (DIN 49406, IEC 60884-1)
T2-85	TOOL FOR VERIFICATION OF MINIMUM WITHDRAWAL FORCE (SMALL SSA 444, IEC 60884-1)
T2-86	TOOL FOR VERIFICATION OF MINIMUM WITHDRAWAL FORCE (LARGE SSA 444, IEC 60884-1)
T2-87	TOOL FOR VERIFICATION OF MINIMUM WITHDRAWAL FORCE (DIN 49406, IEC 60884-1)
T2-88	TOOL FOR VERIFICATION OF MINIMUM WITHDRAWAL FORCE (EN 50075, IEC 60884-1)
T2-89	BUMP TEST APPARATUS 1500 x 1000 mm, 100 kg, IEC 60065
T2-91	G5 MOUNTING JIG FOR THE TESTING OF LAMPHOLDERS (IEC 60400, Fig. 1)
T2-92	FIXTURE FOR THE TESTING OF LAMPHOLDER FLEXIBILITY (IEC 60400, Fig. 3)
T2-93	TUMBLING BARREL h=500 mm (BS 1363-1, Fig. 20)
T2-94	APPARATUS FOR CHECKING THE STABILITY OF SIDE EARTHING CONTACTS (VDE 0620-1 F. 15)
T2-95	TEST PLUG 16 A (VDE 0620-1 F. 16A)
T2-96	TEST PLUG 3-PHASE 16 A (VDE 0620-1 F. 16b)
T2-97	TEST PLUG 3-PHASE 25 A (VDE 0620-1 F. 16c)
T2-98	TEST PLUG 2,5 A (VDE 0620-1 F. 16d)
T2-99	DEVICE FOR CHECKING THE FIXATION OF PLUG PINS (VDE 0620-1 F. 31)
T3-01	EARTH BOND RESISTANCE TESTER 12 (6) V a.c., I max. 33A
T3-04	APP. FOR SOCKET-OUTLETS BREAKING CAP. AND NORMAL OP. TEST
T3-05	SURGE TEST APPARATUS
T3-06	TEST CIRCUIT A FOR SWITCHES
T3-07	TEST CIRCUIT FOR SWITCHES 200 A
T3-08	TEST CIRCUIT FOR SWITCHES 80 A
T3-09	TEST CIRCUIT FOR SWITCHES
T3-10	APPARATUS FOR CIRCULAR AND ANGULAR MOVEMENTS
T3-12	APPARATUS FOR NORMAL OPERATION TEST OF LAMPHOLDERS (FOR USE WITH T3-10)
T3-13	CABLE FLEXING APPARATUS
T3-15	APPARATUS FOR AUTOMATIC REEL CORD TESTING
T3-20	APPARATUS FOR FLEXING TEST (IEC 60884-1, BS 1343-1)
T3-25	APP. FOR BREAKING CAPACITY AND NORMAL OPERATION TESTS (IEC 320)
T3-26	APP. FOR BREAKING CAPACITY AND NORMAL OPERATION TESTS (DOUBLE SIDED, IEC 320)
T3-27	APP. FOR SOCKET-OUTLETS BREAK. CAP. AND NORMAL OP. TEST (DOUBLE SIDED, IEC 884-1)
T3-30	ADDITIONAL PARTS FOR T3-10 FOR TOASTERS FLEXING TEST
T3-44	PROBE FOR MEASURING SURFACE TEMPERATURE (IEC 60335-2-6)
T3-53	TIMER WITH THERMOMETER
T3-53A	THERMOCOUPLE WITH THE COPPER BLOCK Dia. 4 mm (IEC 60695-11-5, 60335-1, 60959-1)
T3-53B	THERMOCOUPLE WITH THE COPPER BLOCK Dia. 9 mm (IEC 60695-11-3, ASTM D 5027)
T3-53C	THERMOCOUPLE WITH THE COPPER BLOCK Dia. 5,5 mm (IEC/TS 60695-11-4, ASTM D 5027)
T3-54A	FLAME HEIGHT GAUGE (IEC 60695-11-5, 60335-1, 60959-1)
T3-54B	FLAME HEIGHT GAUGE (IEC/TS 60695-11-3)
T3-54C	FLAME HEIGHT GAUGE (IEC/TS 60695-11-4)
T3-54D	CLEARANCE GAUGE (IEC/TS 60695-11-4)
T3-61	IMPULSE GENERATOR 1,2/50 µs, 12 kV
T3-62	IMPULSE GENERATOR 10/700 ?s, 6 kV (IEC 60950, 61180-1, 61180-2)
T3-64	APPARATUS FOR NORMAL OPERATION TESTS OF SOCKET OUTLETS (BS 1363-2, Cl. 18)
T4-03	BALL PRESSURE TEST APPARATUS
T4-04	DEVICE FOR TESTING NON-SOLID PINS 100 N
T4-07	GLOW WIRE TEST APPARATUS
T4-07A	THERMOCOUPLE FOR GLOW WIRE TEST APPARATUS
T4-07B	WIRE LOOP FOR GLOW WIRE TEST APPARATUS
T4-07T	TIMER FOR GLOW WIRE TEST APPARATUS
T4-08	GLOW WIRE TEST APPARATUS
T4-08A	THERMOCOUPLE DIA. 0,5 mm FOR GLOW WIRE TEST APPARATUS
T4-08B	WIRE LOOP FOR GLOW WIRE TEST APPARATUS (FOR THERMOCOUPLE DIA. 0,5 mm)
T4-08D	SILVER FOIL 2 mm2 - 20 pcs.
T4-08E	THERMOCOUPLE DIA. 1 mm FOR GLOW WIRE TEST APPARATUS
T4-08F	WIRE LOOP FOR GLOW WIRE TEST APPARATUS (FOR THERMOCOUPLE DIA. 1 mm)
T4-08G	WIRE LOOP FOR GLOW WIRE TEST APPARATUS (STRAIGHT FOR THERMOCOUPLE DIA. 0,5 mm)
T4-08H	WIRE LOOP FOR GLOW WIRE TEST APPARATUS (STRAIGHT FOR THERMOCOUPLE DIA. 1 mm)
T4-09	SOLDERABILITY TEST APPARATUS (IEC 60068-2-20/Test T: Test Ta Method 1, Test Tb Method 1A, 1B)
T4-10	HIGH FREQUENCY SPARK GENERATOR
T4-18	APP. FOR PLUG PIN ABRASION (IEC 60884-1, BS 1363-1)
T4-19	APPARATUS FOR COMPRESSION TEST FOR THE VERIFICATION OF RESISTANCE TO HEAT
T4-20	ABRASION APPARATUS
T4-22	POWER SUPPLY 12 kV DC, 2 mA
T4-29	APPARATUS FOR PRESSURE TEST AT HIGH TEMPERATURE
T4-31	NEEDLE FLAME BURNER DIA. 0.5 mm (IEC 60695-11-5)
T4-33	BUNSEN BURNER
T4-34	BUNSEN BURNER FISH TAIL
T4-36	MECHANISMUS FOR BURNING TESTS (VERT. AND HORIZ.)
T4-37	NEEDLE FLAME TESTER
T4-38	BURNER TEST SET
T4-40	POWER SUPPLY FOR T4-53
T4-41	TRACKING TEST APPARATUS 600V
T4-41A	ELECTRODES FOR TRACKING TEST APPARATUS (PAIR)
T4-41C	NOZZLE FOR TRACKING TEST APPARATUS
T4-41D	DISTANCE GAUGE FOR TRACKING TEST APPARATUS
T4-41E	AMMONIUM CHLORIDE SOLUTION 1 l
T4-41F	CALIBRATED WEIGHTS M1 IN WOODEN BOXES, 1 g and 100 g WITH CERTIFICATES
T4-42	TRACKING TEST APPARATUS (1000V)
T4-47	APPARATUS FOR HIGH CURRENT ARCHING
T4-50	ELECTRODE ARRANGEMENT 65
T4-52	APPARATUS FOR HIGH-VOLTAGE LOW-CURRENT ARCHING
T4-53	TEST FIXTURE FOR HOT WIRE COIL IGNITABILITY TEST (IEC 60695-2-20, Fig. 3, IEC 60950-1)
T4-54	WINDING DEVICE FOR HOT WIRE COIL IGNITABILITY TEST (IEC 60695-2-20, Fig. 4, IEC 60950-1)
T4-55	NiCr WIRE 80/20, DIA. 0.5 mm, 100 m FOR HOT WIRE IGNITION TEST (IEC 60695-2-20, IEC 60950-1)
T4-56	ELECTRODE ARRANGEMENT for EN 50 028
T4-57	MANDREL TEST APPARATUS (IEC 60950-1, Annex AA)
T4-58	APPARATUS FOR SCRATCHING COOLING SYSTEMS (IEC 60335-2-24, Fig. 102)
T4-59	APPARATUS FOR TESTING RESISTANCE TO FLEXING AND ABRASION OF HOSES (IEC 60335-2-2, Fig. 101 and 102)
T4-61	BURNER 1000W (IEC 60695-11-2)
T4-62	GAS AND AIR SUPPLY UNIT FOR T4-61 (FLOWMETERS ?2%)
T4-63	GAS AND AIR SUPPLY UNIT FOR T4-61 (FLOWMETERS ?4%)
T4-64	METALLIC SCREEN WITH BURNER STAND (IEC 60332-1)
T4-65	BURNER 50, 500 W (IEC 60695-11-4 A, IEC 60695-11-3 A)
T4-66	GAS SUPPLY UNIT FOR T4-65 and T4-70 (ISO 9772, IEC 60695-11-3, 500W, FLOWMETER ?2%, VALVE AND MANOMETER)
T4-67	GAS SUPPLY UNIT FOR T4-65 (IEC 60695-11-4, 50W, FLOWMETER ?2%, VALVE AND MANOMETER)
T4-69	APPARATUS FOR PRESSURE TEST (BS 1363-1, Fig. 23)
T4-70	WING TOP BURNER (ISO 9772)
T4-70A	WING TOP FOR T4-70 (ISO 9772) - spare part
T4-71	SUPPORT GAUZE HOLDER (ISO 9772)
T4-72	BURNER WITH VENTURI MIXER FOR BURNING CABLES 500 mm (IEC 60331-11)
T4-73	GAS SUPPLY UNIT FOR T4-72, T4-61 (IEC 60331-11, IEC 60695-11-2, WITH MASS FLOWMETERS)
T4-74	CABLE SUPPORTING ARRANGEMENT (IEC 60331-11)
T5-00	GAUGE MAINTENANCE KIT
T5-08	TEST CORNER 800 x 800 x 1200 mm, 480 THERMOCOUPLES
T5-101	GAUGE FOR HOLES FOR BACKPLATE LAMPHOLDERS SCREWS (IEC 60238, Fig. 3)
T5-102	E14 TEST CAP FOR NORMAL OPERATION TEST (IEC 60238, Fig. 5)
T5-103	E27 TEST CAP FOR NORMAL OPERATION TEST (IEC 60238, Fig. 5)
T5-104	E40 TEST CAP FOR NORMAL OPERATION TEST (IEC 60238, Fig. 5)
T5-105	E27 GAUGE FOR DETECTING SIDE-CONTACTS WITH CUTTING-EDGES (7006-22B-1)
T5-106	E27 GAUGE FOR TESTING PROTECTION AGAINST BULB-NECK DAMAGE AND FOR TESTING CONTACT-MAKING IN LAMPHOLDERS (7006-21-5)
T5-11	E14 TEST CAP FOR TORQUE TESTS
T5-110	E14 PLUG GAUGE FOR LAMPHOLDERS FOR TESTING CONTACT MAKING (7006-30-2)
T5-111	E12 PLUG GAUGE FOR TESTING CONTACT MAKING (7006-25C-1)
T5-112	E12 "NOT GO" PLUG GAUGE (7006-26B-1)
T5-113	E12 "GO" PLUG GAUGE (7006-32A-1)
T5-114	TEST PROBE "a" DIA. 12, EN 50144-2-5, IEC 60745-2-5
T5-115	E14 PLUG GAUGE FOR LAMPHOLDERS WITH CANDLE SHAPED SHAFT FOR CANDLE LAMPS FOR TESTING CONTACT MAKING (7006-30A-1)
T5-116	SMALL TEST FINGER - test probe 19
T5-117	TEST ROD DIA. 8 X 230 mm (IEC 60335-2-14 cl. 20.102)
T5-118	TEST PIN DIA. 3 x 100 mm
T5-119	GAUGE FOR THE VERIFICATION OF THE OUTLINE OF COVERS OR COVER-PLATES
T5-12	E27 TEST CAP FOR TORQUE TESTS
T5-120	CYLINDRICAL STEEL ROD, DIA. 3 mm (IEC 60884-1, Cl. 24)
T5-122	"NOT GO" GAUGE FOR E12 CAPS ON FINISHED LAMPS 7006-28C-1
T5-123	ALIGNMENT GAUGE FOR FUSE 5 x 20 mm (IEC 60127-2, Fig. 4)
T5-124	ALIGNMENT GAUGE FOR FUSE 6.3 x 32 mm (IEC 60127-2, Fig. 4)
T5-125	MAX. GAUGE FOR FUSES 5 x 20 mm
T5-126	MIN. GAUGE FOR FUSES 5 x 20 mm
T5-127	MAX. GAUGE FOR FUSES 6.3 x 32 mm
T5-128	MIN. GAUGE FOR FUSES 6.3 x 32 mm
T5-129	SOLID LINK FOR TEST ON FUSE CLIPS (BS 1363-1, Fig. 19, Cl. 20)
T5-13	E40 TEST CAP FOR TORQUE TESTS
T5-130	ELECTRICAL INDICATOR
T5-131	DEVICE FOR CHECKING THE RESISTANCE TO LATERAL STRAIN OF 10/16A 250 V TWO-POLE FIXED SOCKET OUTLETS (IEC 60884-1, CEE 7)
T5-132	GY6.35 GAUGE FOR CHECKING MIN. RETENTION FORCE OF CONTACTS IN LAMPHOLDERS (7006-59D-2)
T5-133	G6.35, GX6.35 & GY6.35 "GO" GAUGE FOR LAMPHOLDERS 15 (7006-61B-4)
T5-134	G6.35 & GX6.35 GAUGE FOR CHECKING MIN. RETENTION FORCE OF CONTACTS IN LAMPHOLDERS (7006-61C-4)
T5-135	GX5.3 & GU5.3 SINGLE PIN GAUGE FOR CHECKING CONTACT MAKING IN LAMPHOLDERS (7006-73G-2)
T5-136	GX5.3 GAUGE FOR CHECKING MAX. WITHDRAWAL FORCE OF CONTACTS IN LAMPHOLDERS (7006-73F-2)
T5-138	ADDITIONAL "GO" GAUGE FOR E12 CAPS ON FINISHED LAMPS 7006-27J-1
T5-139	"GO" GAUGE FOR E12 CAPS ON FINISHED LAMPS (7006-27H-1)
T5-14	E14 MANDREL FOR BENDING TEST (IEC 60238 Fig. 12)
T5-146	GAUGE FOR FINISHED LAMPS FITTED WITH E40 CAPS FOR TESTING PROTECTION AGAINST ACCIDENTAL CONTACT (7006-53-1)
T5-147	GAUGE FOR FINISHED LAMPS FITTED WITH E40 CAPS FOR TESTING CONTACT MAKING (7006-52-1)
T5-148	"NOT GO" GAUGE FOR CAPS ON FINISHED LAMPS E40 (7006-28D-1)
T5-149	"GO" GAUGE FOR CAPS ON FINISHED LAMPS E40 (7006-27-7)
T5-15	E27 MANDREL FOR BENDING TEST (IEC 60238 Fig. 12)
T5-150	E27 GAUGE "GO" C13A
T5-151	E27 GAUGE "NOT GO" C13E
T5-152	E33 GAUGE "GO" C13B
T5-153	E33 GAUGE "NOT GO" C13F
T5-154	R1? GAUGE "GO" C13C
T5-155	R1? GAUGE "NOT GO" C13G
T5-156	R2 GAUGE "GO" C13D
T5-157	R2 GAUGE "NOT GO" C13H
T5-158	E27 GAUGE "GO" C14A
T5-159	E27 GAUGE "NOT GO" C14E
T5-16	E40 MANDREL FOR BENDING TEST (IEC 60238 Fig. 12)
T5-160	E33 GAUGE "GO" C14B
T5-161	E33 GAUGE "NOT GO" C14F
T5-162	R1? GAUGE "GO" C14C
T5-163	R1? GAUGE "NOT GO" C14G
T5-164	R2 GAUGE "GO" C14D
T5-165	R2 GAUGE "NOT GO" C14H
T5-166	E10 TEST CAP FOR TORQUE TESTS
T5-167	E26 TEST CAP FOR TORQUE TESTS
T5-168	E27 GAUGE FOR TESTING CONTACT MAKING AND PROT. AGAINST ACC. CON. DURING INSERTION (7006-22A-5)
T5-169	E14 GAUGE FOR TESTING CONTACT MAKING AND PROT. AGAINST ACC. CON. DURING INSERTION (7006-31-5)
T5-17	PUSH-PULL DYNAMOMETER 20N
T5-170	W3/16 GAUGE "GO" C15A
T5-171	W3/16 GAUGE "NOT GO" C15B
T5-172	W3/16 GAUGE "GO" C15C
T5-173	W3/16 GAUGE "NOT GO" C15D
T5-175	D II. GAUGE C16A
T5-176	D III. GAUGE C16B
T5-177	D IV.H GAUGE C16C
T5-178	D V.H GAUGE C16D
T5-18	PUSH-PULL DYNAMOMETER 50N
T5-180	D II. GAUGE C17A
T5-181	D III. GAUGE C17B
T5-182	D IV.H GAUGE C17C
T5-183	D V.H GAUGE C17D
T5-185	DEVICE FOR CHECKING THE RESISTANCE TO LATERAL STRAIN (DIN 49406, IEC 60884-1)
T5-186	DEVICE FOR CHECKING THE RESISTANCE TO LATERAL STRAIN (SSA 444, IEC 60884-1)
T5-187	DEVICE FOR CHECKING THE RESISTANCE TO LATERAL STRAIN (EN 50075, IEC 60884-1)
T5-19	PUSH-PULL DYNAMOMETER 100N
T5-190	E26 TEST CAP FOR TORQUE TESTS (7004-21A-2)
T5-191	E12 TEST CAP FOR TORQUE TESTS (7004-28-2)
T5-192	E17 TEST CAP FOR TORQUE TESTS (7004-26-2)
T5-193	SKIRTED E26 TEST CAP FOR TORQUE TESTS (7004-130-1)
T5-194	E26d TEST CAP FOR TORQUE TESTS (7004-29-2)
T5-195	E27/51x39 TEST CAP FOR TORQUE TESTS (7004-27-3)
T5-196	B22d TEST CAP FOR TORQUE TESTS (7004-10-7)
T5-197	B15d TEST CAP FOR TORQUE TESTS (7004-11-6)
T5-198	TEST PIN DIA. 1 x 60 mm, WITH 5 N SPRING (BS 1363-2, Cl. 9.4.1)
T5-200	CONTACT GAUGE 0,2 A (IEC 60320-1, F. 27)
T5-201	NO CONTACT GAUGE 0,2 A (IEC 60320-1, F. 27)
T5-202	CONTACT GAUGE 2,5 A (IEC 60320-1, F. 27)
T5-203	NO CONTACT GAUGE 2,5 A (IEC 60320-1, F. 27)
T5-204	CONTACT GAUGE 6 A (IEC 60320-1, F. 27)
T5-205	NO CONTACT GAUGE 6 A (IEC 60320-1, F. 27)
T5-206	CONTACT GAUGE 10 A (IEC 60320-1, F. 27)
T5-207	NO CONTACT GAUGE 10 A (IEC 60320-1, F. 27)
T5-208	CONTACT GAUGE 16 A (IEC 60320-1, F. 27)
T5-209	NO CONTACT GAUGE 16 A (IEC 60320-1, F. 27)
T5-21	TEST KNIFE SIZE 00
T5-210	GO GAUGE FOR CONNECTORS TO STANDARD SHEET C13 AND C17 (IEC 60320-1, FIG. 9F)
T5-211	NOT-GO GAUGE FOR CONN. TO STANDARD SHEET C13 AND C17 (IEC 60320-1, FIG. 9G)
T5-212	GO GAUGE FOR APPLIANCE INLETS TO STANDARD SHEETS C14, C16 AND C18 (IEC 60320-1, FIG. 9H)
T5-213	GO GAUGE FOR CONN. TO STANDARD SHEET C15 (IEC 60320-1, FIG. 9J)
T5-214	GO GAUGE FOR CONNECTORS TO STANDARD SHEET C15 A (IEC 60320-1, FIG. 9S)
T5-215	NOT GO GAUGE FOR CONN. TO STANDARD SHEET C13, C15 & C17 (IEC 60320-1, FIG. 9R)
T5-216	GO GAUGE FOR APPLIANCE INLETS TO STANDARD SHEET C16A (IEC 60320-1, FIG. 9T)
T5-22	TEST KNIFE SIZE 0
T5-220	APPLIANCE INLET GAUGE FOR MAX. WITHDRAWAL FORCE CHECKING C14 (IEC 60320-1, Cl. 16)
T5-221	APPLIANCE INLET GAUGE FOR MAX. WITHDRAWAL FORCE CHECKING - C16 (IEC 60320-1, Cl. 16)
T5-222	APPLIANCE INLET GAUGE FOR MAX. WITHDRAWAL FORCE CHECKING - C16 A (IEC 60320-1, Cl. 16)
T5-225	APPLIANCE INLET GAUGE FOR BREAKING CAPACITY TEST - C14
T5-226	APPLIANCE INLET GAUGE FOR BREAKING CAPACITY TEST - C16
T5-23	TEST KNIFE SIZE 1
T5-235	CONTACT GAUGE FOR EARTHING CONTACT 2,5 A
T5-236	NO CONTACT GAUGE FOR EARTHING CONTACT 2,5 A
T5-237	CONTACT GAUGE FOR EARTHING CONTACT 16 A
T5-238	NO CONTACT GAUGE FOR EARTHING CONTACT 16 A
T5-24	TEST KNIFE SIZE 2
T5-25	TEST KNIFE SIZE 3
T5-250	APPLIANCE INLET GAUGE FOR TEMPERATURE RISE MEASUREMENTS - C14
T5-251	APPLIANCE INLET GAUGE FOR TEMPERATURE RISE MEASUREMENTS - C16
T5-252	APPLIANCE INLET GAUGE FOR TEMPERATURE RISE MEASUREMENTS - C16 A
T5-253	APPLIANCE INLET GAUGE FOR TEMPERATURE RISE MEASUREMENTS C22
T5-259	APPLIANCE INLET GAUGE FOR PULLING TEST - C24
T5-26	TEST KNIFE SIZE 4
T5-260	APPLIANCE INLET GAUGE FOR PULLING TEST C14
T5-261	APPLIANCE INLET GAUGE FOR PULLING TEST - C16
T5-262	APPLIANCE INLET GAUGE FOR PULLING TEST - C16 A
T5-263	APPLIANCE INLET GAUGE FOR PULLING TEST - C2
T5-264	APPLIANCE INLET GAUGE FOR PULLING TEST - C6
T5-265	APPLIANCE INLET GAUGE FOR PULLING TEST - C8
T5-266	APPLIANCE INLET GAUGE FOR PULLING TEST - C10
T5-267	APPLIANCE INLET GAUGE FOR PULLING TEST - C18
T5-268	APPLIANCE INLET GAUGE FOR PULLING TEST - C20
T5-269	APPLIANCE INLET GAUGE FOR PULLING TEST - C22
T5-27	TEST KNIFE SIZE 4a
T5-270	E14 TEST CAP A (IEC 60238, Fig. 13)
T5-273	E14 TEST CAP B (IEC 60238, Fig. 13)
T5-274	E27 TEST CAP B (IEC 60238, Fig. 14)
T5-275	TEST CAP FOR LAMPHOLDERS E40 (IEC 60238 Fig. 15)
T5-276	E27 GAUGE I. FOR TESTING RESILIENCE OF SIDE CONTACT (7006-22C-1)
T5-277	E27 GAUGE II. FOR TESTING RESILIENCE OF SIDE CONTACT (7006-22D-1)
T5-28	FOOT PROBE (EN 836, Fig. 3)
T5-280	E14 TEST CAP FOR INSUL. RESISTANCE TESTING AND TEMP. RAISE MEASURING (IEC 60238 Fig. 11)
T5-281	E27 TEST CAP FOR INSUL. RESISTANCE TESTING AND TEMP. RAISE MEASURING (IEC 60238 Fig. 11)
T5-282	E40 TEST CAP FOR INSUL. RESISTANCE TESTING AND TEMP. RAISE MEASURING (IEC 60238 Fig. 11)
T5-283	E10 TEST CAP FOR INSUL. RESISTANCE TESTING AND TEMP. RAISE MEASURING (IEC 60238 Fig. 11)
T5-284	GAUGE FOR TESTING CONTACT-MAKING OF LAMPS FITTED WITH CAPS E26, E26/50x39,E26/51x39 & E26d (NON-SKIRTED) (7006-29-3)
T5-285	E26d GAUGE FOR CAPS ON FINISHED LAMPS FOR TESTING PROTECTION AGAINST ACCIDENTAL CONTACT (7006-29A-2)
T5-286	E26d GAUGE WITH REFERENCE DIAMETER OF 23 mm FOR CAPS (7006-29B-2)
T5-287	E26d GAUGE WITH REFERENCE DIAMETER OF 13,2 mm FOR CAPS (7006-29C-2)
T5-288	E26d GAUGE WITH REFERENCE DIAMETER OF 10,4 mm FOR CAPS ON FINISHED LAMPS (7006-29D-1)
T5-289	G5 DOUBLE ENDED GAUGE III. FOR A COMBINED PAIR OF LAMPHOLDERS FOR TESTING CONTACT-MAKING (7006-47B-4, IEC 60400)
T5-290	G5 DOUBLE ENDED GAUGE IV. FOR A COMBINED PAIR OF LAMPHOLDERS FOR TESTING CONTACT-MAKING (7006-47B-4, IEC 60400)
T5-291	G5 DOUBLE ENDED GAUGE V. FOR A COMBINED PAIR OF LAMPHOLDERS FOR TESTING CONTACT-MAKING (7006-47B-4, IEC 60400)
T5-292	E26 "GO" GAUGE FOR LAMPHOLDERS (7006-25B-2)
T5-293	E26 & E26d "NOT GO" GAUGE FOR LAMPHOLDERS (7006-26A-2)
T5-294	E26d GAUGE FOR CHECKING THE RADIAL POSITION OF THE INTERMEDIATE CONTACT OF LAMPHOLDER(7006-29E-1)
T5-295	E26d GAUGE A FOR TESTING THE RELATIVE POSITION OF THE CONTACT IN LAMPHOLDERS (7006-29F-2)
T5-296	E26d GAUGE B FOR TESTING THE RELATIVE POSITION OF THE CONTACT IN LAMPHOLDERS (7006-29F-2)
T5-297	E26d GAUGE FOR TESTING CONTACT-MAKING IN LAMPHOLDERS (7006-29G-3)
T5-298	E26d GAUGE FOR TESTING CONTACT-MAKING IN METAL-SHELL PAPER-LINED LAMPHOLDERS (7006-29H-3)
T5-299	E26d PLUG GAUGE FOR TESTING PROTECTION AGAINST ACCIDENTAL CONTACT IN LAMPHOLDERS (7006-29J-1)
T5-300	E26d "GO" PLUG GAUGE FOR LAMPHOLDERS (7006-29K-1)
T5-301	GAUGE 947 A1
T5-302	GAUGE 947 A2
T5-303	GAUGE 947 A3
T5-304	GAUGE 947 A4
T5-305	GAUGE 947 A5
T5-306	GAUGE 947 B6
T5-307	GAUGE 947 B7
T5-308	GAUGE 947 B8
T5-309	GAUGE 947 B9
T5-31	DUMMY FUSE LINK SET (4 pcs.) SIZE 00
T5-310	GAUGE 947 B10
T5-311	GAUGE 947 B11
T5-312	GAUGE 947 B12
T5-313	GAUGE 947 B13
T5-314	GAUGE 947 B14
T5-315	GAUGE 947 B15
T5-316	GAUGE 947 B16
T5-317	SET OF GAUGES 947
T5-32	DUMMY FUSE LINK SET (4 pcs.) SIZE 0
T5-320	VESSEL FOR TESTING HOB ELEMENTS AND HOTPLATES DIA. 110 (IEC 60335-2-6, Fig. 101, IEC 60335-2-9, Fig. 103)
T5-321	VESSEL FOR TESTING HOB ELEMENTS AND HOTPLATES DIA. 145 (IEC 60335-2-6, Fig. 101, IEC 60335-2-9, Fig. 103)
T5-322	VESSEL FOR TESTING HOB ELEMENTS AND HOTPLATES DIA. 180 (IEC 60335-2-6, Fig. 101, IEC 60335-2-9, Fig. 103)
T5-323	VESSEL FOR TESTING HOB ELEMENTS AND HOTPLATES DIA. 220 (IEC 60335-2-6, Fig. 101, IEC 60335-2-9, Fig. 103)
T5-324	VESSEL FOR TESTING HOB ELEMENTS AND HOTPLATES DIA. 300 (IEC 60335-2-6, Fig. 101, IEC 60335-2-9, Fig. 103)
T5-328	GLASS VESSEL FOR MICROWAVE OVEN
T5-32X	VESSEL FOR TESTING HOB ELEMENTS AND HOTPLATES
T5-33	DUMMY FUSE LINK SET (4 pcs.) SIZE 1
T5-330	LOADING WEIGHT 0.5 KG FOR REFRIGERATORS
T5-331	LOADING WEIGHT 2.3 KG FOR REFRIGERATORS
T5-335	ECCENTRIC WEIGHT FOR OVENS (IEC 60335-2-6, Fig. 103)
T5-336	TEST ROD dia. 6, l 150
T5-337	SHORT TEST PROBE DIA. 12
T5-338	TEST ROD DIA. 40 WITH HEMISPHERICAL END
T5-339	TEST HEMISPHE DIA. 100
T5-34	DUMMY FUSE LINK SET (4 pcs.) SIZE 2
T5-340	G5 PLUG GAUGE FOR LAMPHOLDERS FOR TESTING PROTECTION AGAINST ACCIDENTAL CONTACT (7006-47A-2)
T5-341	G23 PLUG GAUGE "A" FOR CHECKING MAXIMUM INSERTION FORCE AND MAXIMUM WITHDRAW FORCE IN LAMPHOLDERS (7006-69A-1)
T5-342	G23 and GX23 PLUG GAUGE "B" FOR CHECKING MAXIMUM INSERTION FORCE IN LAMPHOLDER (7006-69B-2)
T5-343	G23 PLUG GAUGE "C" FOR CHECKING MINIMUM RETENTION FORCE IN LAMPHOLDERS
T5-344	G13 DOUBLE ENDED GAUGE III. FOR A COMBINED PAIR OF LAMPHOLDERS FOR TESTING CONTACT-MAKING (7006-60B-4, IEC 60400)
T5-345	G13 DOUBLE ENDED GAUGE IV. FOR A COMBINED PAIR OF LAMPHOLDERS FOR TESTING CONTACT-MAKING (7006-60B-4, IEC 60400)
T5-346	G13 DOUBLE ENDED GAUGE V. FOR A COMBINED PAIR OF LAMPHOLDERS FOR TESTING CONTACT-MAKING (7006-60B-4, IEC 60400)
T5-347	G5 TEST CAP (IEC 60400, Fig. 4)
T5-348	G13 TEST CAP (IEC 60400, Fig. 4)
T5-35	DUMMY FUSE LINK SET (4 pcs.) SIZE 3
T5-350	GO GAUGE FOR CONNECTORS TO STANDARD SHEET C1 (IEC 60320-1, FIG. 2)
T5-351	GO GAUGE FOR CONNECTORS TO STANDARD SHEET C5 (IEC 60320-1, FIG. 4)
T5-352	GO GAUGE FOR CONNECTORS TO STANDARD SHEET C7 (IEC 60320-1, FIG. 5)
T5-353	GO GAUGE FOR SIDE-ENTRY CONNECTORS TO STANDARD SHEET C7 (IEC 60320-1, FIG. 5 bis)
T5-354	NOT-GO GAUGE FOR CONNECTORS TO STANDARD SHEET C1 (IEC 60320-1, FIG. 6)
T5-355	NOT-GO GAUGE FOR CONNECTORS TO STANDARD SHEETS C1, C5 AND C7 (IEC 60320-1, FIG. 7)
T5-356	NOT-GO GAUGE FOR CONNECTORS TO STANDARD SHEETS C1 AND C7 (IEC 60320-1, FIG. 8)
T5-357	NOT-GO GAUGE FOR APPLIANCE INLETS TO STANDARD SHEETS C8, C8A AND C8B (IEC 60320-1, F. 9)
T5-358	GO GAUGE FOR CONNECTORS TO STANDARD SHEET C9 (IEC 60320-1, FIG. 9A)
T5-359	NOT-GO GAUGE FOR CONNECTORS TO STANDARD SHEET C9 (IEC 60320-1, FIG. 9B)
T5-36	DUMMY FUSE LINK SET (4 pcs.) SIZE 4
T5-360	GO GAUGE FOR APPLIANCE INLETS TO STANDARD SHEET C10 (IEC 60320-1, FIG. 9C)
T5-361	GO GAUGE FOR CONNECTORS TO STANDARD SHEET C17 (IEC 60320-1, FIG. 9K)
T5-362	GO GAUGE FOR CONNECTORS TO STANDARD SHEET C19 (IEC 60320-1, FIG. 9L)
T5-363	GO GAUGE FOR APPLIANCE INLETS TO STANDARD SHEETS C20 AND C24 (IEC 60320-1, FIG. 9M)
T5-364	GO GAUGE FOR CONNECTORS TO STANDARD SHEET C21 (IEC 60320-1, FIG. 9N)
T5-365	GO GAUGE FOR APPLIANCE INLETS TO STANDARD SHEET C22 (IEC 60320-1, FIG. 9P)
T5-366	GO GAUGE FOR CONNECTORS TO STANDARD SHEET C23 (IEC 60320-1, FIG. 9Q)
T5-37	DUMMY FUSE LINK SET (4 pcs.) SIZE 4a
T5-370	VESSEL FOR TESTING INDUCTION HOTPLATES DIA. 110 (IEC 60335-2-6, Fig. 102, IEC 60335-2-9, Fig. 104)
T5-371	VESSEL FOR TESTING INDUCTION HOTPLATES DIA. 145 (IEC 60335-2-6, Fig. 102, IEC 60335-2-9, Fig. 104)
T5-372	VESSEL FOR TESTING INDUCTION HOTPLATES DIA. 180 (IEC 60335-2-6, Fig. 102, IEC 60335-2-9, Fig. 104)
T5-373	VESSEL FOR TESTING INDUCTION HOTPLATES DIA. 220 (IEC 60335-2-6, Fig. 102, IEC 60335-2-9, Fig. 104)
T5-374	VESSEL FOR TESTING INDUCTION HOTPLATES DIA. 300 (IEC 60335-2-6, Fig. 102, IEC 60335-2-9, Fig. 104)
T5-375	VESSEL FOR TESTING INDUCTION HOTPLATES DIA. 210 (IEC 60335-2-6, Fig. 102, IEC 60335-2-9, Fig. 104)
T5-376	VESSEL FOR TESTING INDUCTION HOTPLATES DIA. 270 (IEC 60335-2-6, Fig. 102, IEC 60335-2-9, Fig. 104)
T5-37X	VESSELS FOR TESTING INDUCTION HOTPLATES
T5-380	"GO" AND "NOT GO" GAUGE FOR STARTERS (IEC 155 fig. 6)
T5-381	"NOT GO" GAUGE FOR STARTERS (IEC 155 fig. 7)
T5-382	"GO" GAUGE FOR STARTERS (IEC 155 fig. 8)
T5-383	"GO" GAUGE FOR STARTERS FOR CLASS II LUMINAIRES (IEC 155 fig. B.2)
T5-400	"GO" GAUGE FOR E27 CAPS ON FINISHED LAMPS (7006-27B-1)
T5-401	"GO" GAUGE FOR E14 CAPS ON FINISHED LAMPS (7006-27F-1)
T5-402	"NOT GO" GAUGE FOR E27 CAPS ON FINISHED LAMPS (7006-28A-1)
T5-403	"NOT GO" GAUGE FOR E14 CAPS ON FINISHED LAMPS (7006-28B-1)
T5-404	"GO" GAUGE FOR DIMENSION "S1" OF E27 CAPS ON FINISHED LAMPS (7006-27C-1)
T5-405	"GO" GAUGE FOR DIMENSION "S1" OF E14 CAPS ON FINISHED LAMPS (7006-27G-1)
T5-406	GAUGE FOR FINISHED LAMPS FITTED WITH E27 CAPS FOR TESTING CONTACT MAKING (7006-50-1)
T5-407	GAUGE FOR FINISHED LAMPS FITTED WITH E14 CAPS FOR TESTING CONTACT MAKING (7006-54-2)
T5-41	RIGID TEST FINGER (IEC 61032, F. 7, TEST PROBE 11)
T5-411	GAUGE FOR E27 CAPS ON FINISHED LAMPS FOR TESTING PROT. AGAINST ACC. CONTACT (7006-51A-2)
T5-412	GAUGE FOR FINISHED LAMPS FITTED WITH E14 CAPS FOR TESTING PROT. AGAINST ACC. CONTACT (7006-55-2)
T5-413	GAUGE FOR E27/51x39 CAPS ON FINISHED LAMPS FOR TESTING PROT. AGAINST ACC. CONTACT (7006-51-2)
T5-414	GAUGE FOR E27 CAPS ON FINISHED LAMPS FOR TESTING PROT. AGAINST ACC. CONTACT DURING INSERTION (7006-51A-2)
T5-415	"NOT GO" GAUGE FOR B15 CAPS ON FINISHED LAMPS (7006-10-8)
T5-416	"NOT GO" GAUGE FOR B22 CAPS ON FINISHED LAMPS (7006-10-8)
T5-417	"GO" GAUGE FOR B15 CAPS ON FINISHED LAMPS (7006-11-8)
T5-418	"GO" GAUGE FOR B22 CAPS ON FINISHED LAMPS (7006-11-8)
T5-419	GAUGE B15d FOR TESTING THE INSERTION OF CAPS IN LAMPHOLDERS (7006-4A-2)
T5-42	RIGID TEST FINGER WITH FORCE METER 50 N
T5-420	GAUGE B22d FOR TESTING THE INSERTION OF CAPS IN LAMPHOLDERS (7006-4A-2)
T5-421	GAUGE FOR TESTING THE RETENTION OF B15d CAPS IN THE HOLDER (7006-4B-1)
T5-422	GAUGE FOR TESTING THE RETENTION OF B22d CAPS IN THE HOLDER (7006-4B-1)
T5-43	RIGID TEST FINGER WITH FORCE METER 100 N
T5-430	E27 HOLDER FOR TORQUE TEST ON LAMPS WITH SCREW CAPS (IEC 60968 F. 3)
T5-431	E26 HOLDER FOR TORQUE TEST ON LAMPS WITH SCREW CAPS (IEC 60968 F. 3, 60432-1 F. C.2)
T5-432	B22 HOLDER FOR TORQUE TEST ON LAMPS WITH BAYONET CAPS (IEC 60968 F. 3, 60432-1 F. C.1)
T5-433	E14 HOLDER FOR TORQUE TEST ON LAMPS WITH SCREW CAPS (IEC 60968 F. 3, 60432-1 F. C.2)
T5-438	"GO" GAUGE FOR CAPS E26, E26/50x39, E26/51x39 & E26d (7006-27D-3)
T5-440	B22d GAUGE FOR CHECKING CONTACT POSITION AND CONTACT FORCE IN BAYONET LAMPHOLDERS (7006-15A-2)
T5-441	BY22d GAUGE FOR CHECKING CONTACT POSITION AND CONTACT FORCE IN BAYONET LAMPHOLDERS (7006-15A-2)
T5-442	B15d GAUGE FOR CHECKING CONTACT POSITION AND CONTACT FORCE IN BAYONET LAMPHOLDERS (7006-15B-1)
T5-443	B15d GAUGE FOR THE SLOTS IN LAMHOLDERS (7006-13-5)
T5-444	B22d, B22d-3 & BY22d GAUGE FOR THE SLOTS IN LAMHOLDERS (7006-13-5)
T5-445	B15d SUPPLEMENTARY "GO" GAUGE FOR LAMPHOLDERS (7006-12C-2)
T5-446	B15 "NOT GO"/RETENTION GAUGE FOR LAMPHOLDERS (7006-12D-2)
T5-447	B22d SUPPLEMENTARY "GO" GAUGE FOR LAMPHOLDERS (7006-12A-2)
T5-448	BY22d SUPPLEMENTARY "GO" GAUGE FOR LAMPHOLDERS (7006-12A-2)
T5-449	B22 "NOT GO"/RETENTION GAUGE FOR LAMPHOLDERS (7006-12B-2)
T5-451	28x2 "GO" AND "NOT GO" FOR BARREL THREAD OF SHADE HOLDER RINGS (60399-IEC-03-1, 60238)
T5-452	40x2,5 "GO" AND "NOT GO" FOR BARREL THREAD OF SHADE HOLDER RINGS (60399-IEC-03-1, 60238)
T5-453	35x2,74 "GO" AND "NOT GO" FOR BARREL THREAD OF SHADE HOLDER RINGS (60399-IEC-03-1, 60238)
T5-454	45x2,74 "GO" AND "NOT GO" FOR BARREL THREAD OF SHADE HOLDER RINGS (60399-IEC-03-1, 60238)
T5-455	20,8x2 "GO" AND "NOT GO" FOR BARREL THREAD OF SHADE HOLDER RINGS (60399-IEC-03-1, 60238)
T5-457	PLUG GAUGE FOR LAMPHOLDERS BY22d (Sh. 7006-17B-1)
T5-458	GAUGE FOR CHECKING CONTACT POSITION AND CONTACT FORCE IN BAYONET LAMPHOLDERS B22d-3 (90/135deg) (Sh. 7006-15-7)
T5-459	20,8x2 "GO" GAUGE FOR BARREL THREAD OF LAMPHOLDERS WITH SHADE HOLDER RING (60399-IEC-04-1, 60238)
T5-46	TEST PIN DIA. 1 x 20 mm (Fig. 1, BS 1363-2)
T5-460	28x2 "GO" GE FOR BARREL THREAD OF LAMPHOLDERS WITH SHADE HOLDER RING (60399-IEC-04-1, 60238)
T5-461	40x2,5 "GO" GE FOR BARREL THREAD OF LAMPHOLDERS WITH SHADE HOLDER RING (60399-IEC-04-1, 60238)
T5-462	35x2,74 "GO" GE FOR BARREL THREAD OF LAMPHOLDERS WITH SHADE HOLDER RING (60399-IEC-04-1, 60238)
T5-463	45x2,74 "GO" GE FOR BARREL THREAD OF LAMPHOLDERS WITH SHADE HOLDER RING (60399-IEC-04-1, 60238)
T5-464	28x2 "NOT GO" GE FOR BARREL THREAD OF LAMPHOLDERS WITH SHADE HOLDER RING (60399-IEC-04-1, 60238)
T5-465	40x2,5 "NOT GO" GE FOR BARREL THREAD OF LAMPHOLDERS WITH SHADE HOLDER RING (60399-IEC-04-1, 60238)
T5-466	35x2,74 "NOT GO" GE FOR BARREL THREAD OF LAMPHOLDERS WITH SHADE HOLDER RING (60399-IEC-04-1, 60238)
T5-467	45x2,74 "NOT GO" GE FOR BARREL THREAD OF LAMPHOLDERS WITH SHADE HOLDER RING (60399-IEC-04-1, 60238)
T5-468	GX24 GAUGE "A" FOR LAMPHOLDER (7006-78A-5)
T5-469	GX24 GAUGE "C" FOR LAMPHOLDER (7006-78C-5)
T5-47	TEST PIN DIA.3-DIA.4, l=15 (IEC 61032, F. 9, TEST PROBE 13)
T5-470	TEST CAP FOR THE TEST OF CLAUSE 13 FOR LAMPHOLDERS GX10q AND GY10q (IEC 60400 F. 27)
T5-471	TEST CAP FOR THE TEST OF 17.1 FOR LAMPHOLDERS GX10q (IEC 60400 F. 33)
T5-472	PLUG GAUGE "B" FOR CHECKING MINIMUM CONTACT FORCE IN LAMPHOLDER GY10q (Sh. 7006-85C-1)
T5-473	"GO" GAUGE FOR LAMPHOLDER GY10q (Sh. 7006-85B-2)
T5-474	"GO" GAUGE FOR LAMPHOLDER GX10q (Sh. 7006-84C-2)
T5-475	PLUG GAUGE "B" FOR CHECKING MINIMUM CONTACT FORCE IN LAMPHOLDERS GX10q TYPE A AND MINIMUM RETENTION FORCE IN LAMPHOLDERS TYPE B (Sh. 7006-84D-1)
T5-476	PLUG GAUGE LAMPHOLDER BA21 (Sh. 7006-12-8)
T5-477	PLUG GAUGE LAMPHOLDER B15 (Sh. 7006-12-8)
T5-478	PLUG GAUGE LAMPHOLDER B22 (Sh. 7006-12-8)
T5-479	"GO" AND "NOT GO" PLUG GAUGE FOR BAYONET LAMPHOLDER B22d-3 (Sh. 7006-20-4)
T5-48	TEST PIN DIA. 4 x 100 mm
T5-480	20,8x2 "NOT GO" GE FOR BARREL THREAD OF LAMPHOLDERS WITH SHADE HOLDER RING (60399-IEC-04-1, 60238)
T5-481	G24, GX24 & GY24 "NOT GO" GAUGE "F" FOR CHECKING NON-INTERCHANGEABILITY OF CAPS IN LAMPHOLDERS (7006-78F-6 Fig. 1)
T5-482	G24, GX24 & GY24 "NOT GO" GAUGE "F" FOR CHECKING NON-INTERCHANGEABILITY OF CAPS IN LAMPHOLDERS (7006-78F-6 Fig. 2)
T5-483	G24, GX24 & GY24 "NOT GO" GAUGE "F" FOR CHECKING NON-INTERCHANGEABILITY OF CAPS IN LAMPHOLDERS (7006-78F-6 Fig. 3)
T5-484	G24, GX24 & GY24 "NOT GO" GAUGE "F" FOR CHECKING NON-INTERCHANGEABILITY OF CAPS IN LAMPHOLDERS (7006-78F-6 Fig. 4)
T5-485	G24, GX24 "NOT GO" GAUGE "F" FOR CHECKING NON-INTERCHANGEABILITY OF CAPS IN LAMPHOLDERS (7006-78F-6 Fig. 5)
T5-486	G24, GX24 "NOT GO" GAUGE "F" FOR CHECKING NON-INTERCHANGEABILITY OF CAPS IN LAMPHOLDERS (7006-78F-6 Fig. 6)
T5-487	G24, GX24 "NOT GO" GAUGE "F" FOR CHECKING NON-INTERCHANGEABILITY OF CAPS IN LAMPHOLDERS (7006-78F-6 Fig. 7)
T5-488	GO AND NOT GO GAUGE FOR CAPS G24, GX24 & GY24 (Sh. 7006-78-5, Fig. 1)
T5-489	GO AND NOT GO GAUGE FOR CAPS G24, GX24 & GY24 (Sh. 7006-78-5, Fig. 2)
T5-49	LONG TEST PIN DIA.3-DIA.4, l=50
T5-490	GO AND NOT GO GAUGE FOR CAPS G24, GX24 & GY24 (Sh. 7006-78-5, Fig. 3)
T5-491	GO AND NOT GO GAUGE FOR CAPS G24, GX24 & GY24 (Sh. 7006-78-5, Fig. 4)
T5-492	GO AND NOT GO GAUGE FOR CAPS G24q-5 & GX24q-5 (Sh. 7006-78-5, Fig. 1)
T5-493	G5.3 "GO" GAUGE FOR LAMHOLDERS (7006-73A-1)
T5-494	GX5.3 "GO" GAUGE FOR LAMPHOLDERS (7006-73D-3)
T5-495	GY5.3 "GO" GAUGE FOR LAMPHOLDERS (7006-73E-3)
T5-496	GY5.3 SINGLE PIN GAUGE FOR CHECKING MINIMUM RETENTION FORCE OF CONTACTS IN LAMPHOLDERS (7006-73J-1)
T5-497	GZ10 "GO" AND "NOT GO" GAUGE FOR BASES (7006-120-1)
T5-498	G5 DOUBLE ENDED GAUGE V. FOR A COMBINED PAIR OF LAMPHOLDERS FOR TESTING CONTACT-MAKING (7006-47B-4) (Change E=2.44 D=4.4 mm)
T5-499	G13 DOUBLE ENDED GAUGE V. FOR A COMBINED PAIR OF LAMPHOLDERS FOR TESTING CONTACT-MAKING (7006-60B-4) (Change E=2.44 D = 12.35 mm)
T5-50	TEST PROBE DIA. 30 x 80 mm (IEC 61032, F. 9, TEST PROBE 41)
T5-51	RIGID STEEL WIRE DIA. 1 WITH HANDLE & STOP SPHERE (IEC 61032 - Test probe D)
T5-52	RIGID STEEL ROD DIA. 2,5 WITH HANDLE & STOP SPHERE (IEC 61032 - Test probe C)
T5-534	GU10 "GO" AND "NOT GO" GAUGE FOR BASES (7006-121-1)
T5-541	R7s "GO" GAUGE FOR A COMBINED PAIR OF LAMPHOLDERS Z=118mm (7006-62-4)
T5-542	R7s "GO" GAUGE FOR A COMBINED PAIR OF LAMPHOLDERS Z=189mm (7006-62-4)
T5-543	R7s "GO" GAUGE FOR A COMBINED PAIR OF LAMPHOLDERS Z=254mm (7006-62-4)
T5-544	R7s "GO" GAUGE FOR A COMBINED PAIR OF LAMPHOLDERS Z=333mm (7006-62-4)
T5-545	SINGLE PIN GAUGE "E" FOR CHECKING MINIMUM RETENTION FORCE OF CONTACTS IN LAMPHOLDERS G5, 2G(X)7, 2G10, 2G11, G13, G(X)23, G(X)(Y)24, G(X)(Y)32 (7006-69E-5)
T5-546	G5 "GO" AND "NO GO" GAUGE FOR UNMOUNTED BI-BIN CAP (7006-46-3)
T5-547	G13 "GO" AND "NO GO" GAUGE FOR UNMOUNTED BI-BIN CAP (7006-44-4)
T5-548	G6.35, GX6.35 & GZ6.35 "GO" AND "NOT GO" GAUGE FOR BASES (7006-61-5)
T5-549	GY6.35 "GO" AND "NOT GO" GAUGE FOR BASES (7006-61-5)
T5-55	TEST PIN DIA. 2 x 100 mm
T5-550	G4 GAUGE A - "GO" AND "NOT GO" GAUGE FOR PINS OF BI-PIN LAMP BASES (7006-72-1)
T5-551	G4 GAUGE B - "GO" GAUGE FOR BASE OF BI-PIN LAMP BASES (7006-72-1)
T5-552	G5.3 GAUGE FOR BI-PIN CAP ON FINISHED LAMPS (7006-73-1)
T5-553	G5.3 "GO" GAUGE FOR BASE (7006-126-1)
T5-554	GU10 "GO" AND "NOT GO" GAUGE FOR BASES (7006-121-1) isti kot T5-534
T5-555	GR8&GR10q GO GAUGE FOR CHECKING THE PINS OF CAPS ON FINISHED LAMPS (7006-68E-1)
T5-556	GR8&GR10q GO AND NOT GO GAUGE FOR CHECKING THE PINS OF CAPS (7006-68F-1)
T5-557	GR10q GO GAUGE FOR UNMOUNTED CAPS (7006-77-2)
T5-558	GR10q GAUGE FOR CAPS TO ENSURE ENTRY OF MAXIMUM LAMPHOLDERS AND TO CHECK PIN SPACING AND LENGTH (7006-77A-2)
T5-559	GX10q GO GAUGE FOR CAPS ON FINISHED LAMPS (7006-84-2)
T5-56	TEST HOOK (IEC 60065, Figure 4)
T5-560	GX10q NOT GO GAUGE "A" FOR CAPS ON FINISHED LAMPS (7006-84A-1)
T5-561	GX10q NOT GO GAUGE "B" FOR CAPS ON FINISHED LAMPS (7006-84B-1)
T5-562	GY10q GO GAUGE FOR CAPS ON FINISHED LAMPS (7006-85-2)
T5-563	GY10q NOT GO GAUGE "A" FOR CAPS ON FINISHED LAMPS (7006-85A-1)
T5-564	G13 HEATED TEST CAP A FOR TESTING OF RESISTANCE TO HEAT OF LAMPHOLDERS WITH T MARKING (IEC 60400 Fig. 9)
T5-565	G13 HEATED TEST CAP B FOR TESTING OF RESISTANCE TO HEAT OF LAMPHOLDERS WITH T MARKING (IEC 60400 Fig. 9)
T5-566	G5 HEATED TEST CAP FOR TESTING OF RESISTANCE TO HEAT OF LAMPHOLDERS WITH T MARKING (IEC 60400 Fig. 9a)
T5-568	SET OF GAUGES A1-A16 (IEC 60947-1, Fig. 2)
T5-569	SET OF GAUGES B1-B16 (IEC 60947-1, Fig. 2)
T5-571	GAUGE FOR TESTING MAX. WITHDRAWAL FORCE OF PLUG 2P AC 250V 2,5A (DIN VDE 0620-1 Fig.16d)
T5-572	GAUGE L1 FOR TESTING SOCKET OUTLETS (DIN 49 440 - L1)
T5-573	GAUGE L2 FOR TESTING SOCKET OUTLETS (DIN 49 440 - L2)
T5-574	RING GAUGE DIN 49 441 - L1
T5-575	RING GAUGE DIN 49 441 - L2
T5-577	GAUGE 14 (DIN VDE 0620-1)
T5-578	GAUGE 16A (DIN VDE 0620-1)
T5-579	E14 HOLDER FOR TORSION TEST ON LAMPS WITH SCREW CAPS (IEC 60968, Fig. 2)
T5-58	TEST PIN DIA. 1 x 100 mm
T5-580	E27 HOLDER FOR TORSION TEST ON LAMPS WITH SCREW CAPS (IEC 60968, Fig. 2)
T5-581	B15 HOLDER FOR TORQUE TEST ON LAMPS WITH BAYONET CAPS (IEC 60968, Fig. 3)
T5-582	B22 HOLDER FOR TORQUE TEST ON LAMPS WITH BAYONET CAPS (IEC 60968, Fig. 3)
T5-583	GX10q-1 GO GAUGE FOR KEYS OF CAPS ON FINISHED LAMPS (7006-84E-1)
T5-584	GX10q-2 GO GAUGE FOR KEYS OF CAPS ON FINISHED LAMPS (7006-84E-1)
T5-585	GX10q-3 GO GAUGE FOR KEYS OF CAPS ON FINISHED LAMPS (7006-84E-1)
T5-586	GX10q-4 GO GAUGE FOR KEYS OF CAPS ON FINISHED LAMPS (7006-84E-1)
T5-587	GX10q-5 GO GAUGE FOR KEYS OF CAPS ON FINISHED LAMPS (7006-84E-1)
T5-588	GX10q-6 GO GAUGE FOR KEYS OF CAPS ON FINISHED LAMPS (7006-84E-1)
T5-589	GY10q-1 GO GAUGE FOR KEYS OF CAPS ON FINISHED LAMPS (7006-85D-1)
T5-59	TEST PROBE DIA. 12 (IEC 60950, Fig. 2C)
T5-590	GY10q-2 GO GAUGE FOR KEYS OF CAPS ON FINISHED LAMPS (7006-85D-1)
T5-591	GY10q-3 GO GAUGE FOR KEYS OF CAPS ON FINISHED LAMPS (7006-85D-1)
T5-592	GY10q-4 GO GAUGE FOR KEYS OF CAPS ON FINISHED LAMPS (7006-85D-1)
T5-593	GY10q-5 GO GAUGE FOR KEYS OF CAPS ON FINISHED LAMPS (7006-85D-1)
T5-594	GY10q-6 GO GAUGE FOR KEYS OF CAPS ON FINISHED LAMPS (7006-85D-1)
T5-595	GAUGE FOR CHECKING SIDE CONTACTS (F. 43 - DIN VDE 0620-1)
T5-596	"GO" GAUGE A FOR THE CONTACTS OF LAMPHOLDERS G10q, GX10q, GY10q & GZ10q (7006-79A-2)
T5-597	"GO" GAUGE B FOR THE CONTACTS OF LAMPHOLDERS G10q, GX10q, GY10q & GZ10q (7006-79A-2)
T5-598	CONTACT MAKING GAUGE FOR LAMPHOLDERS G10q, GX10q, GY10q (7006-79B-1)
T5-60	STRAIGHT PROBE DIA. 38 (UL 153, Fig. 1)
T5-600	APPLIANCE INLET GAUGE FOR MAX. WITHDRAWAL FORCE CHECKING - C2 (IEC 60320-1, Cl. 16)
T5-601	APPLIANCE INLET GAUGE FOR MAX. WITHDRAWAL FORCE CHECKING - C6 (IEC 60320-1, Cl. 16)
T5-602	APPLIANCE INLET GAUGE FOR MAX. WITHDRAWAL FORCE CHECKING - C8 (IEC 60320-1, Cl. 16)
T5-603	APPLIANCE INLET GAUGE FOR MAX. WITHDRAWAL FORCE CHECKING - C10 (IEC 60320-1, Cl. 16)
T5-604	APPLIANCE INLET GAUGE FOR MAX. WITHDRAWAL FORCE CHECKING - C18 (IEC 60320-1, Cl. 16)
T5-605	APPLIANCE INLET GAUGE FOR MAX. WITHDRAWAL FORCE CHECKING - C20 (IEC 60320-1, Cl. 16)
T5-606	APPLIANCE INLET GAUGE FOR MAX. WITHDRAWAL FORCE CHECKING - C22 (IEC 60320-1, Cl. 16)
T5-607	APPLIANCE INLET GAUGE FOR MAX. WITHDRAWAL FORCE CHECKING - C24 (IEC 60320-1, Cl. 16)
T5-61	TEST SPHERE DIA. 50, 0,51 kg
T5-611	GAUGE FOR THE VERIFICATION OF THE MINIMUM WITHDRAWAL FORCE 1.5 N - C1, C5 and C7 (IEC 60320-1, Cl. 16)
T5-612	GAUGE FOR THE VERIFICATION OF THE MINIMUM WITHDRAWAL FORCE 1.5 N - C5 (LONG) (IEC 60320-1, Cl. 16)
T5-613	GAUGE FOR THE VERIFICATION OF THE MINIMUM WITHDRAWAL FORCE 1.5 N - C9, C13, C15, C15A, AND C17 (IEC 60320-1, Cl. 16)
T5-614	GAUGE FOR THE VERIFICATION OF THE MINIMUM WITHDRAWAL FORCE 1.5 N - C13, C15 AND C15A (LONG) (IEC 60320-1, Cl. 16)
T5-615	GAUGE FOR THE VERIFICATION OF THE MINIMUM WITHDRAWAL FORCE 2 N - C19, C21 AND C23 (IEC 60320-1, Cl. 16)
T5-616	GAUGE FOR THE VERIFICATION OF THE MINIMUM WITHDRAWAL FORCE 2 N - C19, AND C21 (LONG) (IEC 60320-1, Cl. 16)
T5-62	RIGID SPHERE DIA. 12.5
T5-620	GO GAUGE FOR APPLIANCE OUTLETS TO STANDARD SHEET F (IEC 320-2-2, FIG. 101)
T5-621	GO GAUGE FOR APPLIANCE OUTLETS TO STANDARD SHEET H (IEC 320-2-2, FIG. 102)
T5-622	GO GAUGE FOR APPLIANCE OUTLETS TO STANDARD SHEET J (IEC 320-2-2, FIG. 103)
T5-623	GO GAUGE FOR APPLIANCE OUTLETS TO STANDARD SHEET L (IEC 320-2-2, FIG. 104)
T5-63	TEST SPHERE 0,5 kg (IEC 60950-1)
T5-630	GO GAUGE FOR STARTERS FOR CLASS II LUMINAIRES (Fig. B2, IEC 155)
T5-631	GO GAUGE FOR BI-PIN CAP ON FINISHED LAMPS G5 (Sh. 7006-46A-3)
T5-632	GO GAUGE FOR BI-PIN CAP ON FINISHED LAMPS G13 (Sh. 7006-45-4)
T5-633	GO AND NOT GO GAUGE FOR CAPS ON FINISHED LAMPS 2G7 & 2GX7 (Sh. 7006-102-1)
T5-638	GO GAUGE FOR CAPS ON FINISHED LAMPS 2G11 (Sh. 7006-82-1)
T5-639	GO GAUGE FOR CAPS ON FINISHED LAMPS G10q, GX10q, GY10q, GZ10q (Sh. 7006-79-2)
T5-64	TEST SPHERE DIA. 40 (IEC 60950-1, 60065)
T5-640	GO GAUGE FOR SINGLE-PIN CAP Fa8 (Sh. 7006-40-1)
T5-641	NOT GO GAUGE FOR SINGLE-PIN CAP Fa8 (Sh. 7006-40A-1)
T5-642	GO AND NOT GO GAUGE FOR SINGLE-PIN CAP ON FINISHED LAMPS Fa6 (Sh. 7006-41-2)
T5-643	GO GAUGE FOR CAPS 2G13-41 (Sh. 7006-33-2)
T5-644	GO GAUGE FOR CAPS 2G13-56 (Sh. 7006-33-2)
T5-645	GO GAUGE FOR CAPS 2G13-92 (Sh. 7006-33-2)
T5-646	GO GAUGE FOR CAPS 2G13-152 (Sh. 7006-33-2)
T5-647	GO AND NOT GO GAUGE FOR RECESSED DOUBLE COONTACT CAP R17d ON FINISHED LAMPS (Sh. 7006-57-3)
T5-650	GAUGE FOR THE VERIFICATION OF MAXIMUM WITHDRAWAL FORCE (F. 101, IEC 60884-2-4)
T5-651	GAUGE FOR THE VERIFICATION OF MINIMUM WITHDRAWAL FORCE (F. 102, IEC 60884-2-4)
T5-652	GAUGE C1 FOR SIZE OF ENTRY HOLES FOR PLUG PINS DIA. 5,8 MM (F. 1, CEE 7, VDE0620-1 Gauge 1)
T5-653	GAUGE C1 FOR SIZE OF ENTRY HOLES FOR PLUG PINS DIA. 6 MM (F. 1, CEE 7, VDE0620-1 Gauge 1)
T5-654	GAUGE C2A FOR MINIMUM OPENING OF CONTACT TUBES, 400 G (F. 2 CEE 7)
T5-655	GAUGE C2B FOR MINIMUM OPENING OF CONTACT TUBES, 400 G (F. 2 CEE 7)
T5-656	GAUGE C3 FOR ACCEPTANCE OF TWO-POLE PLUGS (F. 3 CEE 7, VDE0620-1 Gauge 3)
T5-657	GAUGE C4 FOR ACCEPTANCE OF TWO-POLE PLUGS WITH SIDE EARTHING-CONTACTS (F. 4 CEE 7, VDE0620-1 Gauge 4)
T5-658	GAUGE C6A FOR FIXING HOLES OR SLOTS (F. 6 CEE 7)
T5-659	GAUGE C6B FOR FIXING HOLES OR SLOTS (F. 6 CEE 7)
T5-66	RIGID TEST SPHERE WITH GUARD DIA. 50
T5-660	GAUGE C7A FOR DISTANCE TO POINT OF FIRST CONTACT (F. 7 CEE 7, VDE0620-1 Gauge 5)
T5-661	GAUGE C7B FOR DISTANCE TO POINT OF FIRST CONTACT (F. 7 CEE 7, VDE0620-1 Gauge 5)
T5-662	GAUGE C7C FOR DISTANCE TO POINT OF FIRST CONTACT (F. 7 CEE 7, VDE0620-1 Gauge 5)
T5-663	GAUGE C7D FOR DISTANCE TO POINT OF FIRST CONTACT (F. 7 CEE 7, VDE0620-1 Gauge 5)
T5-664	GAUGE C8 FOR WIRING CHANNEL (F. 8 CEE 7)
T5-665	"GO" GAUGE C9A FOR PIN DIAMETER (Fig. 9 CEE 7; EN 50075, Fig. 1, VDE0620-1 Gauge 6)
T5-666	"NOT GO" GAUGE C9A FOR PIN DIAMETER (Fig. 9 CEE 7; EN 50075, Fig. 1, VDE0620-1 Gauge 6)
T5-667	"GO" GAUGE C9B FOR PIN DIAMETER (F. 9 CEE 7, VDE0620-1 Gauge 6)
T5-668	"NOT GO" GAUGE C9B FOR PIN DIAMETER (F. 9 CEE 7, VDE0620-1 Gauge 6)
T5-669	GAUGE C10A FOR PIN SPACING (F. 10 CEE 7, VDE0620-1 Gauge 7)
T5-67	DYNAMOMETER 20 N
T5-670	GAUGE C10B FOR PIN SPACING (F. 10 CEE 7, VDE0620-1 Gauge 7)
T5-671	GAUGE C11 FOR MAXIMUM OPENING OF CONTACT TUBES (F. 11 CEE 7, VDE0620-1 Gauge 8)
T5-672	GAUGE C12 FOR INTERCHANGEABILITY (F. 12 CEE 7, VDE0620-1 Gauge 9)
T5-673	GAUGE FOR INTERCHANGEABILITY (F. 13 CEE 7; EN 50075, Fig. 2)
T5-674	GAUGE FOR DIMENSIONS OF MOUNTING BOXES (F. 14 CEE 7)
T5-675	GAUGE FOR NON-INTERCHANGEABILITY WITH TWO-POLE PLUGS WITH EARTHING CONTACTS (F. 15 CEE 7)
T5-676	GAUGE FOR NON-ACCEPTANCE OF TWO-POLE PLUGS WITHOUT EARTHING CONTACT (F. 16 CEE 7, VDE0620-1 Gauge 11)
T5-677	GAUGE FOR CHECKING IMPOSSIBILITY OF SINGLE-POLE INSERTION OF PLUGS (F. 18 CEE 7, VDE0620-1 Gauge 10)
T5-678	GAUGE A FOR CHECKING IMPOSSIBILITY OF SINGLE-POLE INSERTION OF PLUGS INTO SOCKET OUTLETS. 250 G (F. 19 CEE 7 )
T5-679	GAUGE B FOR CHECKING IMPOSSIBILITY OF SINGLE-POLE INSERTION OF PLUGS INTO SOCKET OUTLETS. 250 G (F. 19 CEE 7, VDE0620-1 GAUGE 12)
T5-68	DYNAMOMETER 50N
T5-680	GAUGE A FOR CHECKING IMPOSSIBILITY OF SINGLE-POLE INSERTION OF PLUGS INTO SOCKET OUTLETS. 1000 G (F. 19 CEE 7 )
T5-681	GAUGE B FOR CHECKING IMPOSSIBILITY OF SINGLE-POLE INSERTION OF PLUGS INTO SOCKET OUTLETS. 1000 G (F. 19 CEE 7, VDE0620-1 GAUGE 12)
T5-684	CONTACT TEST GAUGE (F. 12, BS 1363-2)
T5-686	TURNING MOMENT GAUGE (F. 15, BS 1363-2)
T5-687	WITHDRAWAL PULL GAUGE A FOR EFFECTIVENESS OF CONTACT (F. 16, BS 1363-2)
T5-688	WITHDRAWAL PULL GAUGE B FOR EFFECTIVENESS OF CONTACT (F. 16, BS 1363-2)
T5-689	TEST PLUG FOR TEMPERATURE RISE (F. 30, BS 1363-2)
T5-69	DYNAMOMETER 100 N
T5-690	TEST PLUG FOR BREAKING CAPACITY TEST (F. 1-15, ANSI WD 6)
T5-691	TEST PLUG FOR BREAKING CAPACITY TEST (F. 5-15, ANSI WD 6)
T5-692	TEST PLUG FOR BREAKING CAPACITY TEST (F. 1-20, ANSI WD 6)
T5-693	TEST PLUG FOR BREAKING CAPACITY TEST (F. 5-20, ANSI WD 6)
T5-694	TEST FLANGED INLET FOR BREAKING CAPACITY TEST (FOR 1-15, ANSI WD 6)
T5-695	TEST FLANGED INLET FOR BREAKING CAPACITY TEST (FOR 5-15, ANSI WD 6)
T5-696	TEST FLANGED INLET FOR BREAKING CAPACITY TEST (FOR 1-20, ANSI WD 6)
T5-697	TEST FLANGED INLET FOR BREAKING CAPACITY TEST (FOR 5-20, ANSI WD 6)
T5-698	TEST PLUG R1 FOR BREAKING CAPACITY TEST (DIN 49 441)
T5-699	TEST PLUG FOR BREAKING CAPACITY TEST (F. 4, BS 1363-1)
T5-70	PROBE FOR CONDUIT ENTRIES DIA. 16 mm
T5-700	TEST CAP B22d (IEC 61184, Fig. 6 )
T5-701	TEST CAP B22d FOR INSULATION RESISTANCE NAD HIGH-VOLTAGE TESTS (IEC 61184, Fig. 11)
T5-702	GAUGE FOR HOLES FOR BACKPLATE LAMPHOLDERS SCREWES (IEC 61184, Fig. 3)
T5-703	TEST HOLDER FOR TORSION TEST FOR G5 CAPPED LAMPS (IEC 61195, Fig. A.1)
T5-704	TEST HOLDER FOR TORSION TEST FOR G13 CAPPED LAMPS (IEC 61195, Fig. A.1)
T5-705	G5 DOUBLE ENDED "GO" GAUGE I. FOR A COMBINED PAIR OF LAMPHOLDERS (7006-47C-3)
T5-706	G5 DOUBLE ENDED "GO" GAUGE II. FOR A COMBINED PAIR OF LAMPHOLDERS (7006-47C-3)
T5-707	G13 DOUBLE ENDED "GO" GAUGE I. FOR A COMBINED PAIR OF LAMPHOLDERS (7006-60C-3)
T5-708	G13 DOUBLE ENDED "GO" GAUGE II. FOR A COMBINED PAIR OF LAMPHOLDERS (7006-60C-3)
T5-71	PROBE FOR CONDUIT ENTRIES DIA. 20 mm
T5-710	"GO" GAUGE FOR LAMPHOLDERS G4 (Sh. 7006-72A-3)
T5-711	GAUGE FOR CHECKING MINIMUM RETENTION FORCE IN LAMPHOLDERS G4 (Sh. 7006-72B-2)
T5-712	GO GAUGE FOR G9 LAMPHOLDERS (Sh. 7006-129B-1)
T5-713	GO GAUGE FOR CHECKING MAXIMUM INSERTION AND WITHDRAWAL TORQUE IN LAMPHOLDERS GU10 (Sh. 7006-121A-2)
T5-717	GAUGE "A" FOR CHECKING LAMPHOLDERS G12 (Sh. 7006-80A-2)
T5-718	GAUGE "B" FOR CHECKING LAMPHOLDERS G12 (Sh. 7006-80B-2)
T5-719	GAUGE "C" FOR CHECKING LAMPHOLDERS G12 (Sh. 7006-80C-2)
T5-72	GAUGE FOR CHECKING NON-ACCESSIBILITY OF LIVE PARTS, THROUGH SHUTTERS, AND FO LIVE PARTS OF SOCKET-OUTLETS WITH INCREASED PROTECTION; DIA. 1 x 80 mm (IEC 60884-1, F. 10)
T5-720	STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 50 mm (IEC 60335-2-6)
T5-721	STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 60 mm (IEC 60335-2-6)
T5-722	STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 70 mm (IEC 60335-2-6)
T5-723	STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 80 mm (IEC 60335-2-6)
T5-724	STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 90 mm (IEC 60335-2-6)
T5-725	STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 100 mm (IEC 60335-2-6)
T5-726	STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 110 mm (IEC 60335-2-6)
T5-727	STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 120 mm (IEC 60335-2-6)
T5-728	STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 130 mm (IEC 60335-2-6)
T5-729	STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 140 mm (IEC 60335-2-6)
T5-73	GAUGE FOR CHECKING NON-ACCESSIBILITY OF LIVE PARTS, THROUGH SHUTTERS; 1 x 3 x 80 mm (IEC 60884-1, F. 9)
T5-730	STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 150 mm (IEC 60335-2-6)
T5-731	STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 160 mm (IEC 60335-2-6)
T5-732	STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 170 mm (IEC 60335-2-6)
T5-733	STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 180 mm (IEC 60335-2-6)
T5-734	STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 190 mm (IEC 60335-2-6)
T5-735	STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 200 mm (IEC 60335-2-6)
T5-736	STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 210 mm (IEC 60335-2-6)
T5-737	STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 220 mm (IEC 60335-2-6)
T5-738	STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 230 mm (IEC 60335-2-6)
T5-739	STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 240 mm (IEC 60335-2-6)
T5-740	STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 250 mm (IEC 60335-2-6)
T5-741	STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 260 mm (IEC 60335-2-6)
T5-742	STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 270 mm (IEC 60335-2-6)
T5-743	STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 280 mm (IEC 60335-2-6)
T5-744	STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 290 mm (IEC 60335-2-6)
T5-745	STEEL DISC FOR TESTING INDUCTION HOB ELEMENTS DIA. 300 mm (IEC 60335-2-6)
T5-746	IRON BAR 100 x 20 x 2 mm (IEC 60335-2-6)
T5-747	"GO" GAUGE FOR CHECKING MAXIMUM INSERTION TORQUE IN LAMPHOLDERS GZ10 (Sh. 7006-120A-2)
T5-748	"GO" GAUGE FOR CHECKING MAXIMUM WITHDRAWAL TORQUE IN LAMPHOLDERS GZ10 (Sh. 7006-120A-2)
T5-749	GAUGE B FOR CHECKING IMPOSSIBILITY OF SINGLE-POLE INSERTION OF PLUGS (VDE0620-1 Gauge 10)
T5-75	JOINTED TEST FINGER (IEC 61032, F. 2, TEST PROBE B)
T5-750	GO PLUG GAUGE A FOR STARTHOLDERS (IEC 60400, F. 11)
T5-751	GO PLUG GAUGE B FOR STARTHOLDERS (IEC 60400, F. 11)
T5-752	PLUG GAUGE FOR STARTHOLDERS FOR TESTING CONTACT MAKING & RETENTION (IEC 60400, F. 12)
T5-753	SPECIAL PLUG GAUGE FOR STARTHOLDERS FOR TESTING CONTACT MAKING (IEC 60400, F. 13)
T5-754	TEST CAP FOR THE TEST OF CLAUSE 13 FOR LAMPHOLDERS G5 (IEC 60400, F. 14)
T5-755	TEST CAP FOR THE TEST OF CLAUSE 13 FOR LAMPHOLDERS G13 (IEC 60400, F. 15)
T5-756	TEST CAP FOR THE TEST OF CLAUSE 13 FOR LAMPHOLDERS 2G13-41 (IEC 60400, F. 16)
T5-757	TEST CAP FOR THE TEST OF CLAUSE 13 FOR LAMPHOLDERS 2G13-56 (IEC 60400, F. 16)
T5-758	TEST CAP FOR THE TEST OF CLAUSE 13 FOR LAMPHOLDERS 2G13-92 (IEC 60400, F. 16)
T5-759	TEST CAP FOR THE TEST OF CLAUSE 13 FOR LAMPHOLDERS 2G13-152 (IEC 60400, F. 16)
T5-76	TEST NAIL (IEC 60335-1, F. 7)
T5-760	TEST CAP FOR THE TEST OF CLAUSE 13 FOR LAMPHOLDERS G20 (IEC 60400, F. 17)
T5-761	TEST CAP FOR THE TEST OF CLAUSE 13 FOR LAMPHOLDERS Fa6 (IEC 60400, F. 18)
T5-762	TEST CAP FOR THE TEST OF CLAUSE 13 FOR LAMPHOLDERS G10q (IEC 60400, F. 19)
T5-763	TEST CAP FOR THE TEST OF CLAUSE 13 FOR LAMPHOLDERS Fa8 (IEC 60400, F. 20)
T5-765	TEST CAP FOR THE TEST OF CLAUSE 13 FOR LAMPHOLDERS R17d (IEC 60400, F. 22)
T5-766	TEST CAP FOR THE TEST OF CLAUSE 13 FOR LAMPHOLDERS 2G11 (IEC 60400, F. 23)
T5-767	TEST CAP FOR THE TEST OF CLAUSE 13 FOR LAMPHOLDERS G23 AND GX23 (IEC 60400, F. 24)
T5-768	TEST CAP FOR THE TEST OF CLAUSE 13 FOR LAMPHOLDERS GR10q (IEC 60400, F. 26)
T5-769	TEST CAP FOR THE TEST OF CLAUSE 13 FOR LAMPHOLDERS G24 AND GY24 (IEC 60400, F. 28)
T5-77	SMALL TEST FINGER - TEST PROBE 18
T5-770	TEST CAP FOR THE TEST OF CLAUSE 13 FOR LAMPHOLDERS G32 AND GY32 (IEC 60400, F. 29)
T5-771	TEST CAP FOR THE TEST OF 17.1 FOR LAMPHOLDERS G23 (IEC 60400, F. 30)
T5-772	TEST CAP FOR THE TEST OF 17.1 FOR LAMPHOLDERS GR8 (IEC 60400, F. 31)
T5-773	TEST CAP FOR THE TEST OF 17.1 FOR LAMPHOLDERS GR10q (IEC 60400, F. 32)
T5-774	TEST CAP FOR THE TEST OF 17.1 FOR LAMPHOLDERS GY10q (IEC 60400, F. 34)
T5-775	TEST CAP FOR THE TEST OF 17.1 FOR LAMPHOLDERS 2G11 (IEC 60400, F. 35)
T5-776	TEST CAP FOR THE TEST OF 17.1 FOR LAMPHOLDERS GX23 (IEC 60400, F. 36)
T5-777	TEST CAP FOR THE TEST OF 17.1 FOR LAMPHOLDERS G24 AND GY24 (IEC 60400, F. 37)
T5-778	TEST CAP FOR THE TEST OF 17.1 FOR LAMPHOLDERS G32, GX32 AND GY32 (IEC 60400, F. 38)
T5-779	TEST CAP FOR THE TEST OF CLAUSE 13 (IEC 60400, F. 21)
T5-78	GAUGE FOR VERIFICATION OF GROOVES, HOLES AND REVERSE TAPERS DIA. 2.5, l 100
T5-780	GAUGE FOR DEPTH OF NO-CONTACT TESTS FOR 10 A AND 15 A SOCKET-OUTLETS (AS3112, FIG. 3.1)
T5-781	GAUGE FOR DEPTH OF NO-CONTACT TESTS FOR 20 A SOCKET-OUTLETS (AS3112, FIG. 3.1)
T5-782	DEVICE FOR CHECKING THE RESISTANCE TO LATERAL STRAIN (AS3112, FIG. 3.6)
T5-783	10 A THREE-PIN TEST PLUG FOR CHECKING THREE-PIN FLAT-PIN 250 V MAX SOCKET-OUTLETS AGAINST THE STANDARD TEST FINGER (AS3112, FIG. C1)
T5-784	15 A THREE-PIN TEST PLUG FOR CHECKING THREE-PIN FLAT-PIN 250 V MAX SOCKET-OUTLETS AGAINST THE STANDARD TEST FINGER (AS3112, FIG. C1)
T5-785	20 A THREE-PIN TEST PLUG FOR CHECKING THREE-PIN FLAT-PIN 250 V MAX SOCKET-OUTLETS AGAINST THE STANDARD TEST FINGER (AS3112, FIG. C1)
T5-786	10 A THREE-PIN TEST PLUG FOR CHECKING THREE-PIN FLAT-PIN 250 V MAX SOCKET-OUTLETS AGAINST INCORRECT INSERTION OF PLUGS (AS3112, FIG. D1)
T5-787	15 A THREE-PIN TEST PLUG FOR CHECKING THREE-PIN FLAT-PIN 250 V MAX SOCKET-OUTLETS AGAINST INCORRECT INSERTION OF PLUGS (AS3112, FIG. D1)
T5-788	20 A THREE-PIN TEST PLUG FOR CHECKING THREE-PIN FLAT-PIN 250 V MAX SOCKET-OUTLETS AGAINST INCORRECT INSERTION OF PLUGS (AS3112, FIG. D1)
T5-789	GX10q-1 NOT GO GAUGE FOR CAPS ON FINISHED LAMPS (7006-84F-1)
T5-79	LONG TEST PIN DIA. 4, l=50 (TEST PROBE 12)
T5-790	GX10q-2 NOT GO GAUGE FOR CAPS ON FINISHED LAMPS (7006-84F-1)
T5-791	GX10q-3 NOT GO GAUGE FOR CAPS ON FINISHED LAMPS (7006-84F-1)
T5-792	GX10q-4 NOT GO GAUGE FOR CAPS ON FINISHED LAMPS (7006-84F-1)
T5-793	GX10q-5 NOT GO GAUGE FOR CAPS ON FINISHED LAMPS (7006-84F-1)
T5-794	GX10q-6 NOT GO GAUGE FOR CAPS ON FINISHED LAMPS (7006-84F-1)
T5-795	GY10q-1 NOT GO GAUGE FOR CAPS ON FINISHED LAMPS (7006-85E-1)
T5-796	GY10q-2 NOT GO GAUGE FOR CAPS ON FINISHED LAMPS (7006-85E-1)
T5-797	GY10q-3 NOT GO GAUGE FOR CAPS ON FINISHED LAMPS (7006-85E-1)
T5-798	GY10q-4 NOT GO GAUGE FOR CAPS ON FINISHED LAMPS (7006-85E-1)
T5-799	GY10q-5 NOT GO GAUGE FOR CAPS ON FINISHED LAMPS (7006-85E-1)
T5-80	TEST PLUG FOR ANTENNA COAXIAL SOCKETS
T5-800	GY10q-6 NOT GO GAUGE FOR CAPS ON FINISHED LAMPS (7006-85E-1)
T5-801	GO GAUGES (MIN. AND MAX) FOR SOCKET OUTLET (F. 11, BS 1363-1, 1363-2)
T5-802	CONTACT TEST GAUGE (F. 12, BS 1363-2)
T5-803	GAUGE FOR PLUG PINS (F. 5, BS 1363-1)
T5-804	NON-CONTACT TEST GAUGE (F. 14, BS 1363-2)
T5-805	GAUGE 2A FOR MINIMUM OPENING OF CONTACT TUBES, 200 g (VDE0620-1 Gauge 2)
T5-806	GAUGE 2B FOR MINIMUM OPENING OF CONTACT TUBES, 200 g (VDE0620-1 Gauge 2)
T5-807	GAUGE 2C FOR MINIMUM OPENING OF CONTACT TUBES, 300 g (VDE0620-1 Gauge 2)
T5-808	GAUGE 1 FOR SIZE OF ENTRY HOLES FOR PLUG PINS DIA. 5 mm (VDE0620-1 Gauge 1)
T5-809	GAUGE 16b FOR TESTING MAX. WITHDRAWAL FORCE OF 3-PHASE 16A PLUG (VDE 0620-1 Fig.16b)
T5-81	E14 GAUGE FOR MINIMUM DISTANCE FROM OUTER END OF SCREW SHELL TO CENTRAL CONT.
T5-810	GAUGE 16c FOR TESTING MAX. WITHDRAWAL FORCE OF 3-PHASE 25A PLUG (VDE 0620-1 Fig.16c)
T5-811	GO GAUGE FOR G9 BASE (Sh. 7006-129-1)
T5-812	NOT GO GAUGE FOR G9 BASE (Sh. 7006-129A-1)
T5-813	B15 HOLDER FOR TORQUE TEST ON LAMPS WITH BAYONET CAPS (IEC 60968 F. 3, 60432-1 F. C.1)
T5-814	E27 HOLDER FOR TORQUE TEST ON LAMPS WITH SCREW CAPS (IEC 60432-1 F. C.2)
T5-815	E12 HOLDER FOR TORQUE TEST ON LAMPS WITH SCREW CAPS (IEC 60432-1 F. C.2)
T5-816	E17 HOLDER FOR TORQUE TEST ON LAMPS WITH SCREW CAPS (IEC 60432-1 F. C.2)
T5-817	CALIBRE C1 POUR 16A (NF C 61-314)
T5-818	CALIBRE C1 POUR 6A (NF C 61-314)
T5-819	CALIBRE C2 POUR 6A (NF C 61-314)
T5-82	E27 GAUGE FOR MINIMUM DISTANCE FROM OUTER END OF SCREW SHELL TO CENTRAL CONT.
T5-820	CALIBRE C2 POUR 16A (NF C 61-314)
T5-821	CALIBRE C3A POUR 6A (NF C 61-314)
T5-822	CALIBRE C3B POUR 6A (NF C 61-314)
T5-823	CALIBRE C3C POUR 6A (NF C 61-314)
T5-824	CALIBRE C3D POUR 16A (NF C 61-314)
T5-825	CALIBRE C3E POUR 16A (NF C 61-314)
T5-826	CALIBRE C3F POUR 16A (NF C 61-314)
T5-827	CALIBRE C4A POUR 6A, MASSE 300 g (NF C 61-314)
T5-828	CALIBRE C4A POUR 6A, MASSE 150 g (NF C 61-314)
T5-829	CALIBRE C4B POUR 16A, MASSE 400 g (NF C 61-314)
T5-83	E40 GAUGE FOR MINIMUM DISTANCE FROM OUTER END OF SCREW SHELL TO CENTRAL CONT.
T5-830	CALIBRE C4B POUR 16A, MASSE 200 g (NF C 61-314)
T5-831	CALIBRE C4C POUR 16A, MASSE 400 g (NF C 61-314)
T5-832	CALIBRE C4C POUR 16A, MASSE 200 g (NF C 61-314)
T5-833	CALIBRE C5 POUR 6A (NF C 61-314)
T5-834	CALIBRE C5 POUR 16A (NF C 61-314)
T5-835	CALIBRE C6 POUR 16A (NF C 61-314)
T5-836	CALIBRE C7A POUR 6A (NF C 61-314)
T5-837	CALIBRE C7A POUR 16A (NF C 61-314)
T5-838	CALIBRE C7B POUR 6A (NF C 61-314)
T5-839	CALIBRE C7B POUR 16A (NF C 61-314)
T5-84	E14 "NOT GO" PLUG GAUGE FOR SCREW THREADS OF LAMPHOLDERS (7006-26-4)
T5-840	"GO" GAUGE G FOR CHECKING KEY SLOTS IN LAMPHOLDERS G24,GX24 & GY24 (Sh.7006-78G-6, Fig. 1)
T5-841	"GO" GAUGE G FOR CHECKING KEY SLOTS IN LAMPHOLDERS G24,GX24 & GY24 (Sh.7006-78G-6, Fig. 2)
T5-842	"GO" GAUGE G FOR CHECKING KEY SLOTS IN LAMPHOLDERS G24,GX24 & GY24 (Sh.7006-78G-6, Fig. 3)
T5-843	"GO" GAUGE G FOR CHECKING KEY SLOTS IN LAMPHOLDERS G24,GX24 & GY24 (Sh.7006-78G-6, Fig. 4)
T5-844	"GO" GAUGE G FOR CHECKING KEY SLOTS IN LAMPHOLDERS G24,GX24 & GY24 (Sh.7006-78G-6, Fig. 5)
T5-845	"GO" GAUGE G FOR CHECKING KEY SLOTS IN LAMPHOLDERS G24,GX24 & GY24 (Sh.7006-78G-6, Fig. 6)
T5-846	"GO" GAUGE G FOR CHECKING KEY SLOTS IN LAMPHOLDERS G24,GX24 & GY24 (Sh.7006-78G-6, Fig. 7)
T5-847	"NOT GO" GAUGE FOR E26, E26/50x39, E26/51x39 & E26d CAPS ON FINISHED LAMPS (Sh. 7006-29L-4)
T5-848	"GO" AND "NOT GO" GAUGE FOR G23 BI-PIN CAPS ON FINISHED LAMPS (Sh. 7006-69-2)
T5-849	"GO" GAUGE FOR BI-PIN CAPS AND BASES G38 ON FINISHED LAMPS (Sh. 7006-76-1)
T5-85	E27 "NOT GO" PLUG GAUGE FOR SCREW THREADS OF LAMPHOLDERS (7006-26-4)
T5-850	"GO" AND "NOT GO" GAUGE FOR PINS OF BI-PIN CAPS AND BASES G38 ON FINISHED LAMPS (Sh. 7006-76A-1)
T5-851	"GO" GAUGE FOR E17 LAMPHOLDERS (Sh. 7006-25H-1)
T5-852	"NOT GO" GAUGE FOR E17 LAMPHOLDERS (Sh. 7006-26C-1)
T5-853	GAUGE FOR TESTING CONTACT MAKING IN E17 LAMPHOLDERS (Sh. 7006-26E-1)
T5-854	GAUGE FOR TESTING CONTACT MAKING IN E26 LAMPHOLDERS (Sh. 7006-25J-1)
T5-855	GAUGE FOR TESTING UNACCEPTABLE CONTACT MAKING IN E26d LAMPHOLDERS (Sh. 7006-29M-1)
T5-856	GAUGE FOR CHECKING MINIMUM RETENTION FORCE IN G9 LAMPHOLDERS (Sh. 7006-129C-1)
T5-857	GAUGE FOR CHECKING CONTACT-MAKING IN G9 LAMPHOLDERS (Sh. 7006-129D-1)
T5-858	GAUGE FOR CHECKING THE MINIMUM WITHDRAWAL TORQUE IN GU10 & GZ10 LAMPHOLDERS (Sh. 7006-120B-1)
T5-859	GAUGES FOR TESTING INSERTION AND CONTACT-MAKING IN LAMPHOLDERS 2G13-41 (Sh. 7006-33A-2)
T5-86	E40 "NOT GO" PLUG GAUGE FOR SCREW THREADS OF LAMPHOLDERS (7006-26-4)
T5-860	GAUGES FOR TESTING INSERTION AND CONTACT-MAKING IN LAMPHOLDERS 2G13-56 (Sh. 7006-33A-2)
T5-861	GAUGES FOR TESTING INSERTION AND CONTACT-MAKING IN LAMPHOLDERS 2G13-92 (Sh. 7006-33A-2)
T5-862	GAUGES FOR TESTING INSERTION AND CONTACT-MAKING IN LAMPHOLDERS 2G13-152 (Sh. 7006-33A-2)
T5-863	GAUGE FOR LAMPHOLDERS 2G13 FOR TESTING CONTACT-MAKING (Sh. 7006-33B-1)
T5-864	"GO" GAUGE FOR LAMPHOLDERS 2GX13 (Sh. 7006-125-1)
T5-865	GAUGE FOR TESTING CONTACT-MAKING IN 2GX13 LAMPHOLDERS (Sh. 7006-125C-1)
T5-866	GAUGE FOR CHECKING THE MINIMUM RETENTION FORCE OF 2GX13 LAMPHOLDERS (Sh. 7006-125D-1)
T5-867	GAUGE "A" FOR LAMPHOLDERS S14d (Sh. 7006-112D-1)
T5-868	GAUGE "B1" FOR LAMPHOLDERS S14d (Sh. 7006-112E-1)
T5-869	GAUGE "B2" FOR LAMPHOLDERS S14d (Sh. 7006-112E-1)
T5-87	E14 "GO" PLUG GAUGE FOR SCREW THREADS (7006-25-7)
T5-870	GAUGE "A" FOR LAMPHOLDERS S14s (Sh. 7006-112A-1)
T5-871	GAUGE "B" FOR LAMPHOLDERS S14s (Sh. 7006-112B-1)
T5-872	GAUGE "C" FOR LAMPHOLDERS S14s (Sh. 7006-112C-1)
T5-873	CONTACT GAUGE FOR CHECKING THE EARTHING CONTACT OF 2,5 A CONNECTORS (IEC 60320-1, F. 27)
T5-874	NO CONTACT GAUGE FOR CHECKING THE EARTHING CONTACT OF 2,5 A CONNECTORS (IEC 60320-1, F. 27)
T5-875	CONTACT GAUGE FOR CHECKING THE EARTHING CONTACT OF 16 A CONNECTORS (IEC 60320-1, F. 27)
T5-876	NO CONTACT GAUGE FOR CHECKING THE EARTHING CONTACT OF 16 A CONNECTORS (IEC 60320-1, F. 27)
T5-877	TEST PLUG WITH SOLID PINS FOR NORMAL OPERATION TEST (Cl. 18, BS 1363-2)
T5-878	SET OF SOLID PINS FOR T5-877 (3 pcs. Cl. 18, BS 1363-2)
T5-879	E10, EP10, EY10 "NOT GO" PLUG GAUGE FOR SCREW THREADS OF LAMPHOLDERS (7006-26-4)
T5-88	E27 "GO" GAUGE FOR LAMPHOLDERS (7006-25A-2)
T5-880	E39 "NOT GO" PLUG GAUGE FOR SCREW THREADS OF LAMPHOLDERS (7006-26-4)
T5-881	ACCEPTANCE GAUGE FOR B22d CAPS INTENDED FOR AUTOMATIC WIRE THREADING (7006-3-1)
T5-882	GAUGE BY22d FOR TESTING THE INSERTION OF CAPS IN LAMPHOLDERS (7006-4A-2)
T5-883	"GO" GAUGE FOR CAP B22d-3 (25x26) ON FINISHED LAMPS (7006-19-2)
T5-89	E40 "GO" PLUG GAUGE FOR SCREW THREADS (7006-25-7)
T5-90	E10 "GO" PLUG GAUGE FOR SCREW THREADS (7006-25-7)
T5-91	E10 "NOT GO" PLUG GAUGE FOR SCREW THREADS OF LAMPHOLDERS (7006-26-4)
T5-92	E40 GAUGE FOR TESTING PROTECTION AGAINST BULB-NECK DAMAGE AND FOR TESTING CONTACT-MAKING IN LAMPHOLDERS (7006-23-3)
T5-95	E40 PLUG GAUGE FOR LAMPHOLDERS FOR TESTING PROTECTION AGAINST ACCIDENTAL CONTACT (7006-24-3)
T5-XX	GAUGES AND TEST PROBES
T6-01	VARIABLE RATIO TRANSFORMER (270 V, 30 A)
T6-04	3-PHASE STABILIZED AC POWER SUPPLY UNIT 3 x 0-450V, 40A
T6-07	3-PHASE AC POWER SUPPLY UNIT 3 x 0-550V, 45A
T6-12	4 STEP DOUBLE PROGRAMMABLE TIMER
T6-16	PROGRAMMABLE OFF SWITCHING COUNTER
T6-17	OFF SWITCHING COUNTER WITH TIMER
T6-19	MOTOR CONTROLLER 200
T6-20	PNEUMATIC DRIVE UNIT
T6-21	SWITCH ACTUATOR CONTROL UNIT
T6-21A	SWITCH ACTUATOR (LONGITUDINAL MOVEMENT)
T6-21B	SWITCH ACTUATOR (LONGITUDINAL AND CIRCULAR MOVEMENT)
T6-22	3-PHASE AC POWER SUPPY UNIT 3 x 0-520V, 20A (23 kVA)
T6-46	COORDINATE HOLDER
T6-50	RESISTANCE BATTERY 15 kW
T6-60	AIR CORE INDUCTOR 100 mH, 25 A
T6-64	AIR CORE INDUCTOR Imax 63 A, cosj max. 0.6
T6-65	IRON CORE INDUCTOR Imax 40 A, cosj max. 0.3
T6-70	TUNGSTEN LAMP LOAD (BATTERY WITH 60x200W LAMPS)
T6-71	BENCH FOR MECHANICAL TESTS
T6-90	TEST SYSTEM FOR SWITCHES
T6-91	TEST SYSTEM FOR SWITCHES (3 PHASE 3 x 34 kW, max. 440V, 91A, IEC 60669-1)
T6-92	POWER SUPPLY UNIT WITH NON INDUCTIVE RESISTANCE BATTERY (0-280 V, 15 A, 3,9 kVA, BS 1363-2 Cl. 17,18)
T6-93	POWER SUPPLY UNIT WITH INDUCTIVE AND RESISTIVE LOAD (0-275 V, 125 A, 0,3 cos ?)
T6-94	POWER SUPPLY UNIT WITH INDUCTIVE AND RESISTIVE LOAD (0-275 V, 50 A, 0,3 cos ?)
TC150WB	TEMPERATURE CHAMBER WITH WATER BATH FOR DETERMINATION OF FROST RESISTANCE OF NATURAL STONE 150l, (600 x 500 x 400 mm), -20°C to + 100 °C (EN 12371)
TK265C	TEMPERATURE CHAMBER 265 L, T= -40..50 deg C
TK600C	TEMPERATURE CHAMBER 612 L, T= -40..50 deg C
TK600H	TEMPERATURE CHAMBER 612 L, T= +35..+300 deg C